四（对羟基苯基）卟啉—硅胶固定相的合成及在核苷酸分析中的应用

以大孔微硅胶作基体，经γ－氨丙基三乙氧基硅烷活化与间隔臂氯代环内烷反应后，再与预先合成的四（对羟基苯基）卟啉配体键合，构成电荷转移型亲和色谱固定相。以ＰＨ＝７．０的磷酸盐缓冲溶液作流动相，成功实现对一些核苷酸的高效液相亲和色谱分离。     

激光等离子体反应生成的AgP+n、AumP+n的结构分析

原子簇化合物的合成方法,由于条件限制,只有B、C、St等非金属元素与过渡金属袈基化合物等较为成熟．贵金属原子簇的合成则较困难．然而,应用激光等离子体反应,可使周期表内几乎所有元素都生成原子簇,为原子簇的生成与研究提供了一条新途径．该方法生成的原子簇在飞行时间质谱仪上可记录到一系列信号,某些信号呈现区域极大（或被称为‘匈数’吵］．郑兰芬等用纯化的红磷粉分别与金粉、银粉混合,在激光等离子作源飞行时间质谱仪上得到一系列谱图【2］：ig与P作用只得到单核xg与P形成的lgy：iE离子簇．谱图较简单,＊沪X最大可达叱叱…     

BaB2O4—CdO和BaB2O4—ZnO二元系相图的研究

本文用差热分析和X射线衍射方法测定了BaB_2O_4-CdO和BaB_2O_4-ZnO二元系相图。在BaB_2O_4-CdO体系中存在着一新化合物BaCdB_2O_5,在785±3℃同成份熔化。在BaB_2O_4-ZnO体系中,由包晶反应形成一新化合物BaZn_3B_2O_7,反应温度为903±3℃。在富BaB_2O_4区形成一个宽的低温相BaB_2O_4固溶区。研究结果表明,用Zn~(2 )替代BaB_2O_4中Ba~(2 )形成固溶体,不能将高温相BaB_2O_4稳定到室温,证实了“经验函数关系式”的预测结果。     

Fluorescence decay and quenching of pyrene labeled on sulfonate polyelectrolytes in salt-free aqueous solutions

Fluorescence decay and quenching of pyrene labels on copolymers of 2-acrylamido-2-methylpropanesulphonic acid (AMPS) and N,N-dimethylacrylamide were observed in dilute salt-free aqueous solutions as a function of the mole fraction F_AMPS of AMPS from 0 to 0.896. Monoexponential decay was found for the samples of F_AMPS<0.35 and biexponential decay for the samples of F_AMPS>0.35. The fast decay component is 80%, and the averaged lifetime 〈τ〉 and lifetime τ₁ of the fast decay is decreased with increasing F_AMPS. Quenching efficiency of Cu²⁺, I⁻, CH₃NO₂, and dinitrobenzene to the pyrene label was investigated in the framework of Stern-Volmer plot. With increasing F_AMPS the quenching efficiency of Cu²⁺ is increased while that of I⁻ decreased. For the neutral quenchers, the quenching rate constant k_q increases when F_AMPS<0.449 then decreases, showing a decline of accessibility to the pyrene label. These results were interpreted consistently with the counterion condensation concept, where condensed counterions caused the polyelectrolyte chains to aggregate. The existence of less-polar “temporal aggregated domain” in highly charged polyelectrolytes appears to lead to the slower decay and lower accessibility of the pyrene labels.     

Collective and individual plasmon resonances in nanoparticle films obtained by spin-assisted layer-by-layer assembly

Nanoscale uniform films containing gold nanoparticle and polyelectrolyte multilayer structures were fabricated by the using spin-assembly or spin-assisted layer-by-layer (SA-LbL) deposition technique. These SA-LbL films with a general formula [Au/(PAH-PSS)nPAH]m possessed a well-organized microstructure with uniform surface morphology and high surface quality at a large scale (tens of micrometers across). Plasmon resonance peaks from isolated nanoparticles and interparticle interactions were revealed in the UV-visible extinction spectra of the SA-LbL films. All films showed the strong extinction peak in the region of 510-550 nm, which is due to the plasmon resonance of the individual gold nanoparticles redshifted because of a local dielectric environment. For films with sufficient density of gold nanoparticles within the layers, the second strong peak was consistently observed between 620 and 660 nm, which is the collective plasmon resonance from intralayer interparticle coupling. Finally, we suggested that, for certain film designs, interlayer interparticle resonance might be revealed as an independent contribution at 800 nm in UV-visible spectra. The observation of independent and concurrent individual, intralayer, and interlayer plasmon resonances can be critical for sensing applications, which involve monitoring of optomechanical properties of ultrathin optically active compliant membranes.     

稀土催化丁二烯顺式聚合过程中的环化改性

采用ＮｄＣｌ３·３ｉ－ＰｒＯＨ－ＡｌＥｔ３稀土催化剂进行丁二烯的顺式聚合，在聚合过程中引入烯丙基氯，进行分子内环化反应以及单体的环聚反应．考察了稀土催化剂用量、ｎ（烯丙基氯）／ｎ（ＡｌＥｔ３）、环化时间、反应温度、单体浓度等对环化反应的影响，并对产物进行了红外光谱、核磁共振光谱的表征     

Cluster size effects on CO oxidation activity, adsorbate affinity, and temporal behavior of model Au(n)/TiO2 catalysts

Model catalysts were prepared by deposition of size-selected Au(n) (n = 1-7) on rutile TiO2(110), and characterized by a combination of electron spectroscopy, ion scattering, temperature-programmed desorption, and pulse-dosing mass spectrometry. CO oxidation activity was found to vary strongly with deposited cluster size, with significant activity appearing at Au3. Activity is not obviously correlated with affinity for CO, or with cluster morphology, but is strongly correlated with the clusters' ability to bind oxygen (during O2 exposure) on top of the gold. The temporal dependence of CO2 evolution in reaction of O2 pre-exposed samples with CO pulses shows an interesting cluster size dependence. For Au5 and Au6, the peak CO2 production is coincident with the peak CO flux, but for Au3, Au4, and Au7, there are significant induction periods for CO2 evolution. In addition, it is observed that some of the most active cluster sizes have the slowest CO2 evolution rates. Several mechanistic scenarios capable of accounting for the observations are laid out.     

Fluorescence observations on complex formation between linear and hyperbranched polyelectrolytes in dilute aqueous solutions

The complexation between poly(ethylene imine) (PEI) and poly(2-acrylamido-2-methylpropanesulfonic acid) (PAMPS) or AMPS copolymers was investigated with the relative excimer emission intensity I_E/I_M of a cationic probe 1-pyrenemethylamine hydrochloride (PyMeA · HCl), fluorescence nonradiative energy transfer (NRET) I_Py/I_Np of naphthalene to pyrene labels, the fluorescence anisotropy r and I_E/I_M of pyrene labels. PEI was a hyperbranched weak polycation in acid solution, which formed complex with anionic polyelectrolytes due to the electrostatic attraction. The I_E/I_M of PyMeA · HCl probe decreased to zero, the intra-, intermolecular NRET I_Py/I_Np and I_E/I_M of pyrene labels on the AMPS copolymers reached their maxima when χ was increased from 0 to 2.4, which was defined as the mole ratio of the amino group in PEI to the AMPS group in the polyanion. These facts indicated the formation of nonstoichiometric complex of the oppositely charged polyelectrolytes when χ = 2.4 at the concentration much lower than their overlap concentrations. The intermolecular aggregate appeared as indicated by an increase in the intermolecular I_Py/I_Np and r with χ up to 2.4 due to neutralizing and hydrophobizing the polyelectrolytes and the bridging effect of the PEI chain bound on different polyanion chains. At high pH, PEI became a neutral polymer and did not bind with the AMPS anion to form the complex as illustrated by the constant value of r for the pyrene labels attached to the AMPS polyanion as that without addition of PEI. The amino group in PEI quenched pyrene and naphthalene emission, resulting a decrease in both I_Np and I_Py.     

高比能高功率全石墨烯锂离子电容器

石墨烯由于拥有超高比表面积和超高电导率而被作为电化学电容器材料广泛研究.本文采用树脂为碳源，通过一种方便快捷的树脂交换法制备一种具有高比表面积的多级孔三维石墨烯（3DG）.经过此种方法的催化、造孔、热处理等主要工艺步骤后，可显著增加石墨烯材料的小、介孔数量，从而提高材料的电化学性能.通过BET测试表明，3DG的比表面积可达2400 m²/g，孔体积达到2.0 cm³/g.以3DG作为正负极材料制备高比能量高功率型锂离子电容器（3DG-LIC），可使3DG-LIC的工作电压从传统超级电容器的2.5 V扩展到4.0 V，能量密度也从20 Wh/kg提高到105 Wh/kg.另外，相同的化学和微观结构能很好地平衡正负极的容量及速率，使高比能量高功率的3DG-LIC具有更宽阔的应用领域.