Producing highly linear polyethylenes by using t‐butyl‐functionalized 2,6‐bis(imino)pyridylchromium(III) chlorides

A new family of t‐butyl substituted chromium(III) chloride complexes ( Cr1 – Cr6 ), bearing 2‐(1‐(2,6‐dibenzhydryl‐4‐t‐butylphenylimino)ethyl)‐6‐(1‐(arylimino)ethyl)pyridine (aryl = 2,6‐Me₂C₆H₃ Cr1 , 2,6‐Et₂C₆H₃ Cr2 , 2,6‐i‐Pr₂C₆H₃ Cr3 , 2,4,6‐Me₃C₆H₂ Cr4 and 2,6‐Et₂‐4‐MeC₆H₂ Cr5 ) or 2,6‐bis(1‐(2,6‐dibenzhydryl‐4‐t‐butylphenylimino)ethyl)pyridine ( Cr6 ), has been synthesized by the reaction of CrCl₃·6H₂O in good yield with the corresponding ligands ( L1 – L6 ), respectively. The molecular structures of Cr2 and Cr6 were characterized by X‐ray diffraction highlighted a distorted octahedral geometry with the coordinated N,N,N ligand and three bonded chlorides around the metal center. On activation with modified methylaluminoxane or triisobutyl aluminum, most of the chromium precatalysts exhibit good activities toward ethylene polymerization and produce linear polyethylenes with high‐molecular weight. In addition, an in‐depth catalytic evaluation of Cr2 was conducted to investigate how cocatalyst type and amount, reaction temperature, and run time affect the catalytic activities and polymer properties. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1049–1058     

Alkyl substituents triggered an unexpected formation of mono-and dinuclear zirconium hydrazonate complexes: synthesis,characterization and their catalytic behavior toward ethylene polymerization

Mononuclear zirconium complex 3a of the molecular identity [Zr[η²-(C₄H₃O)C (Et) = NNPh]Cl₃(THF)₂], dinuclear zirconium complexes 3b [{Zr[η²-(C₄H₃O)C(i-Pr) = NNPh]₂}₂(μ²-Cl)₃(μ³-Cl)₂Li(Et₂O)] and 3c [{Zr[η²-(C₄H₃O)C(t-Bu) = NNPh]₂}₂Cl₂(μ²-Cl)₂] have been synthesized by the treatment of lithium salt of (C₄H₃O)C(R) = NNHPh (R = CH₃CH₂, 1a ; R = (CH₃)₂CH, 1b ; R = (CH₃)₃C, 1c ), with different molar ratios of anhydrous zirconium tetrachloride. Of these, complex 3b was formed with lithium adduct and no such adduct was found in complex 3c . Compound 1a and all the zirconium complexes ( 3a - 3c ) were structurally characterized by single-crystal X-ray diffraction studies. Thus, it revealed that each hydrazonato ligand acts in a strained η²-coordination fashion for the three zirconium complexes. The molecular structures of the three zirconium complexes ( 3a - 3c ) reveal the existence of intramolecular hydrogen bonding interactions. Interestingly, complexes 3a and 3b assemble into a two-dimensional network structure through intermolecular hydrogen-bonding interactions. Upon activation with methylaluminoxane (MAO), all the complexes namely 3a , 3b , and 3c exhibited moderate catalytic activities toward ethylene polymerization and produced high molecular weight polyethylene with narrow molecular weight distributions.     

Unifying Molecular Weights of Highly Linear Polyethylene Waxes through Unsymmetrical 2,4-Bis(imino)pyridylchromium Chlorides

By dealing CrCl₃∙3THF with the corresponding ligands (L1–L5), an array of fluoro-substituted chromium (III) chlorides (Cr1–Cr5) bearing 2-[1-(2,4-dibenzhydryl-6-fluoro- phenylimino)ethyl]-6-[1-(arylimino)ethyl]pyridine (aryl = 2,6-Me₂Ph Cr1, 2,6-Et₂Ph Cr2, 2,6-iPr₂Ph Cr3, 2,4,6-Me₃Ph Cr4, 2,6-Et₂-4-MePh Cr5) was synthesized in good yield and validated via Fourier Transform Infrared (FT-IR) spectroscopy and elemental analysis. Besides the routine characterizations, the single-crystal X-ray diffraction study revealed the solid-state structures of complexes Cr2 and Cr4 as the distorted-octahedral geometry around the chromium center. Activated by either methylaluminoxane (MAO) or modified methylaluminoxane (MMAO), all the chromium catalysts exhibited high activities toward ethylene polymerization with the MMAO-promoted polymerizations far more productive than with MAO (20.14 × 10⁶ g (PE) mol⁻¹ (Cr) h⁻¹ vs. 10.03 × 10⁶ g (PE) mol⁻¹ (Cr) h⁻¹). In both cases, the resultant polyethylenes were found as highly linear polyethylene waxes with low molecular weights around 1–2 kg mol⁻¹ and narrow molecular weight distribution (MWD range: 1.68–2.25). In general, both the catalytic performance of the ortho-fluorinated chromium complexes and polymer properties have been the subject of a detailed investigation and proved to be highly dependent on the polymerization reaction parameters (including cocatalyst type and amount, reaction temperature, ethylene pressure and run time).     

Cycloheptyl‐fused NNO‐ligands as electronically modifiable supports for M(II) (M = Co,Fe) chloride precatalysts; probing performance in ethylene oligo‐/polymerization

The N,N,O‐cobalt(II), [2,3‐{C₄H₈C(NAr)}:5,6‐{C₄H₈C(O)}C₅HN]CoCl₂ (Ar = 2,6‐(CHPh₂)₂‐4‐MeC₆H₂ Co1 , 2,6‐(CHPh₂)₂‐4‐EtC₆H₂ Co2 , 2,6‐(CHPh₂)₂‐4‐ClC₆H₂ Co3 , 2,6‐(CHPh₂)₂‐4‐FC₆H₂ Co4 ) and N,N,O‐iron(II) complexes, [2,3‐{C₄H₈C(NAr)}:5,6‐{C₄H₈C(O)}C₅HN]FeCl₂ (Ar = 2,6‐(CHPh₂)₂‐4‐MeC₆H₂ Fe1 , 2,6‐(CHPh₂)₂‐4‐EtC₆H₂ Fe2 , 2,6‐(CHPh₂)₂‐4‐ClC₆H₂ Fe3 , 2,6‐(CHPh₂)₂‐4‐FC₆H₂ Fe4 ), each containing one sterically enhanced but electronically modifiable N‐2,6‐dibenzhydryl‐4‐R²‐phenyl group, have been prepared by a one‐pot template approach using α,α′‐dioxo‐2,3:5,6‐bis(pentamethylene)pyridine, the corresponding aniline along with the respective cobalt or iron salt in acetic acid. Distorted square pyramidal geometries are a feature of the molecular structures of Co1 – Co4 . Upon activation with MAO or MMAO, Co1 – Co4 show good activities (up to 2.2 × 10⁵ g mol^?1(Co) h^?1) affording short chain oligomers (C₄–C₃₀) with good α‐olefin selectivity. By contrast, Fe1 – Fe4 , in the presence of MMAO, displayed moderate activities (up 10.9 × 10⁴ g(PE) mol^?1(Fe) h^?1) for ethylene polymerization forming low‐molecular‐weight linear polymers (up to 13.0 kg mol^?1) incorporating saturated n‐propyl and i‐butyl chain ends. For both cobalt and iron, the precatalysts incorporating the more electron withdrawing 4‐R²‐substituents [Cl ( Co3 / Fe3 ), F ( Co4 / Fe4 )] deliver the best catalytic activities, while with cobalt, these types of substituents additionally broaden the oligomeric distribution. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3980–3989