Polymers from 4,4′-thiodiphenol

Polyesters were made with aromatic diacid chlorides and 4,4,-thiodiphenol. Isophthaloyl chloride and/or terephthaloyl chloride were used as acid chlorides alone or together with 5-cyanoisophthaloyl chloride or [2.2]p-cyclophane-3,9-dicarboxylic acid chloride. The latter components were incorporated in order to make the polymers useful for crosslinking. A polyether could be obtained by polycondensation of 2,4-dichloro-benzonitrile and 4,4′-thiodiphenol. The polycondensations were run in nitrobenzene as solvent.     

Aromatic polyethers,polysulfones, and polyketones as laminating resins. V. Polymers containing acetylenic side groups

1,3-Bis(p-phenoxybenzenesulfonyl)benzene and 4,4′-diphenoxydiphenyl sulfone were polymerized with isophthaloyl and terephthaloyl chloride in Friedel-Crafts type polymerizations. These polymers had 2,4-diphenoxyacetophenone in the backbone. The acetyl group was then converted into an acetylene group. They were crosslinked effectively by cyclization of the acetylene groups with a catalyst or by cyclo-addition with bisnitrile oxides.     

Quantitative analysis of delta9-tetrahydrocannabinol in preserved oral fluid by liquid chromatography-tandem mass spectrometry

A rapid and sensitive method for the analysis of delta9-tetrahydrocannabinol (THC) in preserved oral fluid was developed and fully validated. Oral fluid was collected with the Intercept, a Food and Drug Administration (FDA) approved sampling device that is used on a large scale in the U.S. for workplace drug testing. The method comprised a simple liquid-liquid extraction with hexane, followed by liquid chromatography-tandem mass spectrometry (LC-MS-MS) analysis. Chromatographic separation was achieved using a XTerra MS C18 column, eluted isocratically with 1 mM ammonium formate-methanol (10:90, v/v). Selectivity of the method was achieved by a combination of retention time, and two precursor-product ion transitions. The use of the liquid-liquid extraction was demonstrated to be highly effective and led to significant decreases in the interferences present in the matrix. Validation of the method was performed using both 100 and 500 MicroL of oral fluid. The method was linear over the range investigated (0.5-100 ng/mL and 0. 1-10 ng/mL when 100 and 500 microL, respectively, of oral fluid were used) with an excellent intra-assay and inter-assay precision (relative standard deviations, RSD <6%) for quality control samples spiked at a concentration of 2.5 and 25 ng/mL and 0.5 and 2.5 ng/mL, respectively. Limits of quantification were 0.5 and 0.1 ng/mL when using 100 and 500 microL, respectively. In contrast to existing GC-MS methods, no extensive sample clean-up and time-consuming derivatisation steps were needed. The method was subsequently applied to Intercept samples collected at the roadside and collected during a controlled study with cannabis.     

Aromatic polyethers,polysulfones, and polyketones as laminating resins. IV. Polymers with p-cyclophane units for crosslinking

1,3-Bis(p-phenoxybenzenesulfonyl)benzene, 4,4′-bis(p-phenoxybenzenesulfonyl)diphenyl ether, and 4,4′-diphenoxydiphenyl sulfone were polymerized with isophthaloyl or terephthaloyl chlorides in Friedel-Crafts type polymerizations. These polymers had [2,2]p-cyclophane units in the backbone, introduced by employing 3,9-bis(p-phenoxybenzoyl) [2.2]p-cyclophane as part of the polyaryl ether component. Thermolysis of the dimethylene bridge of the [2.2]p-cyclophane monomer produced diradicals which combined across polymer chains to provide crosslinks. p-Cyclophane polymers with 1,3-bis-(p-phenoxybenzenesulfonyl)benzene showed potential as high performance, thermally stable laminating resins.     

Paper coatings with multi-scale roughness evaluated at different sampling sizes

Papers have a complex hierarchical structure and the end-user functionalities such as hydrophobicity are controlled by a finishing layer. The application of an organic nanoparticle coating and drying of the aqueous dispersion results in an unique surface morphology with microscale domains that are internally patterned with nanoparticles. Better understanding of the multi-scale surface roughness patterns is obtained by monitoring the topography with non-contact profilometry (NCP) and atomic force microscopy (AFM) at different sampling areas ranging from 2000 μm × 2000 μm to 0.5 μm × 0.5 μm. The statistical roughness parameters are uniquely related to each other over the different measuring techniques and sampling sizes, as they are purely statistically determined. However, they cannot be directly extrapolated over the different sampling areas as they represent transitions at the nano-, micro-to-nano and microscale level. Therefore, the spatial roughness parameters including the correlation length and the specific frequency bandwidth should be taken into account for each measurement, which both allow for direct correlation of roughness data at different sampling sizes.     

How thermal curing of an organic paper coating changes topography, chemistry, and wettability

Celluloses are preferred renewable substrates, but hydrophilicity and porosity disfavor their water resistance. We present here an ecofriendly application of imidized nanoparticles and a method to flexibly tune the surface wettability of papers. The soft nanostructured coating is sensitive to thermal curing, which affects both the surface chemistry and morphology. The thermal stability of the coating is first investigated with conventional and modulated differential scanning calorimetry, revealing influences of the imide content and an endotherm reaction below the glass transition temperature at 120-150 °C. The latter is studied in detail for an appropriate selection of the copolymer precursors. According to diffuse reflection infrared spectroscopy, Raman spectroscopy, and UV/vis spectroscopy, the endotherm corresponds to an imidization reaction. The morphology of the coatings is followed at various scale levels by contactless roughness measurements and atomic force microscopy. Finally, the experimental values are fitted to the parameters of the Wenzel wetting model, and so-called calibration curves for the relation between contact angles, surface roughness, and surface chemistry are presented. They allow the prediction of the water contact angle of coated papers from the hydrophilic to the hydrophobic range, with a maximum in hydrophobicity after increasing the imide content at 120-150 °C curing.     

Fire retardancy of polymer clay nanocomposites: Is there an influence of the nanomorphology?

The obvious aspect of nanodispersion and its role when investigating fire retardancy is not often clearly commented upon in the literature. Polymer clay nanocomposites can exhibit different morphologies and these might have consequences for their fire behaviour. Using solid state NMR to quantify the nanodispersion of organoclay in polyamide-6 (PA-6), we have prepared by melt blending PA-6/clay nanocomposite exhibiting different nanomorphologies. NMR results are consistent with transmission electron microscopy (TEM) images but the advantage of NMR is that it is representative of the whole sample and provides a precise quantification. PA-6 nanocomposites exhibit significant reduction of PHRR but the nanomorphology (exfoliation, intercalation and presence of tactoids) does not play any significant role. In other words, we have clearly shown that if nanodispersion is achieved, polymer/clay nanocomposite should exhibit fire retardant properties.     

Bioanalytical procedures for determination of drugs of abuse in oral fluid

Recent advances in analytical techniques have enabled the detection of drugs and drug metabolites in oral fluid specimens. Although GC–MS is still commonly used in practice, many laboratories have developed and successfully validated methods for LC–MS(–MS) that can detect a large number of compounds in the limited sample volume available. In addition, several enzyme immunoassays have been commercialized for the detection of drugs of abuse in oral fluid samples, enabling the fast screening and selection of presumably positive samples. A number of concerns are discussed, such as the variability in the volume of sample collected and its implications in terms of quantitative measurements, and the drug recoveries of the many different specimen collection systems on the market. Additional considerations that also receive attention are the importance of providing complete validation data with respect to analyte stability, matrix effect, and the choice of collection method.     

Second‐order non‐linear optical polymers

In this article we discuss the state of the art in the field of second‐order non‐linear optical polymers. More specifically, we highlight those results that we think made an important contribution to the field, combined with some of our own results. We start with a general overview of all the aspects involved in characterizing second‐order non‐linear optical polymers, from thin film formation and poling to second‐harmonic generation and electro‐optic measurements on such systems. Next, we review the second‐order non‐linear optical properties of selected polymer systems such as poly(vinyl ether)s, polystyrenes, polymethacrylates, main‐chain polymers and high T_g polymers like polyimides and polymaleimides. Finally, we discuss some new polymer systems that might become important in the field of non‐linear optics in the near future.     

MALDI-TOF/TOF de novo sequence analysis of 2-D PAGE-separated proteins from Halorhodospira halophila, a bacterium with unsequenced genome

Because protein identifications rely on matches with sequence databases, high-throughput proteomics is currently largely restricted to those species for which comprehensive sequence databases are available. The identification of proteins derived from organisms with unsequenced genomes mainly depends on homology searching. Here, we report the use of a simplified, gel-based, chemical derivatization strategy for de novo sequence analysis using a MALDI-TOF/TOF mass spectrometer. This approach allows the determination of de novo peptide sequences of up to 20 amino acid residues in length. The protocol was applied on a proteomic study of 2-D PAGE-separated proteins from Halorhodospira halophila, an extremophilic eubacterium with yet unsequenced genome. Using three different homology-based search algorithms, we were able to identify more than 30 proteins from this organism using subpicomole quantities of protein.