Synthese und Röntgenstrukturanalyse des 8π-Elektronenringsystems S4N4O2Sn2(CH3)6 und des magnetische Verhalten von S4N4O2 und S8N8O4

Synthesis and X-Ray Structure Analysis of the 8π-Electron-Ring-System S₄N₄O₂Sn₂(CH₃)₆ and the Magnetic Properties of S₄N₄O₂ and S₈N₈O₄ S₄N₄O₂ reacts with N[Sn(CH₃)₃]₃ in a molar ratio of 1:1 to an eight-membered trimethyltin-substituted 8π-electron skeleton, S₄N₄O₂Sn₂(CH₃)₆. In contrast to known 6π-electronsystems this compound has tin atoms which are tetracoordinated. This was demonstrated on the basis of an x-ray analysis. S₄N₄O₂Sn₂(CH₃)₆ · 1/2 C₆H₆ crystallizes in the space group P2₁/c with a = 1396.0(4), b = 1190.3(4), c = 1256.7(3) pm, and β = 103.46(2)°. It was shown that the ability of coordination at the tin atom depends on the electron density. The magnetic properties of S₄N₄O₂ and S₈N₈O₄ were investigated by the Faraday method. The high diamagnetism in these ring compounds is caused by the π-electrons.     

Comprehensive chemical derivatization for gas chromatography-mass spectrometry-based multi-targeted profiling of the major phytohormones

In the present investigation we report selection of the N-methyl-N-(tert.-butydimethylsilyl)trifluoroacetamide (MTBSTFA) reagent as the most comprehensive derivatization protocol among 17 tested reactions covering trifluoroacetylation, pentafluorobenzylation, methylations, and trimethylsilylations. MTBSTFA allowed easy and robust tert.-butyldimethylsilyl derivatization of 1-aminocyclopropane-1-carboxylic acid, indole-3-acetic acid, (+/-)-jasmonic acid, salicylic acid, (+/-)-abscisic acid, meta-topolin, and trans-zeatin. Detection limits as analysed by selected ion monitoring quadrupole GC-MS were 0.2, 0.01, 1.0, 0.02, 0.3, 0.3, and 0.9 pmol of injected substance, respectively. Analysis of gibberellic acid A3, trans-zeatin riboside and (+/-)-abscisic acid-beta-D-glucopyranosyl ester was best when coupled by splitting extracts and trimethysilylation. The MTBSTFA derivatization protocol was optimised, and validated. The preparation was insensitive to 2% residual water and to < or = 1 day storage at room temperature. The final scheme was highly reproducible and successfully applied to extracts from approximately 300 mg (fresh mass) of tobacco (Nicotiana tabacum) root and Arabidopsis thaliana seedling.     

Sensitivity‐Enhanced 13C‐NMR Spectroscopy for Monitoring Multisite Phosphorylation at Physiological Temperature and pH

Abundant phosphorylation events control the activity of nuclear proteins involved in gene regulation and DNA repair. These occur mostly on disordered regions of proteins, which often contain multiple phosphosites. Comprehensive and quantitative monitoring of phosphorylation reactions is theoretically achievable at a residue‐specific level using ¹H‐¹⁵N NMR spectroscopy, but is often limited by low signal‐to‐noise at pH>7 and T>293 K. We have developed an improved ¹³Cα‐¹³CO correlation NMR experiment that works equally at any pH or temperature, that is, also under conditions at which kinases are active. This allows us to obtain atomic‐resolution information in physiological conditions down to 25 μm . We demonstrate the potential of this approach by monitoring phosphorylation reactions, in the presence of purified kinases or in cell extracts, on a range of previously problematic targets, namely Mdm2, BRCA2, and Oct4.     

Understanding phenol adsorption mechanisms on activated carbons

The interactions between phenol molecules and activated carbons were investigated in order to understand the adsorption mechanism of this aromatic compound. A series of activated carbons with varied chemical composition but similar porous features were synthesized and submitted to phenol exposure from aqueous phase, followed by thermogravimetric analysis and identification of the desorbed species by temperature programmed desorption coupled with mass spectrometry. Based on these experiments, both physi- and chemisorption sites for phenol were identified on the activated carbons. Our results demonstrate that physisorption of phenol depends strictly on the porosity of the activated carbons, whereas chemisorption depends on the availability of the basal planes in the activated carbons. Thus, oxidation of the carbon can suppress the fraction of chemisorbed phenol since the surface functionalities incorporate to the edges of the basal planes; notwithstanding, hydrophilic carbons may present a small but not negligible contribution of chemisorbed phenol depending on the extent of the functionalization. Moreover, these adsorption sites (chemi-) are recovered by simply removal of the surface functionalities after thermal annealing.     

Tuning molecular recognition in water-soluble nanogels with enzyme-like activity for the kemp elimination

The synthesis and characterization of water-soluble imprinted nanogels with enzyme-like activity in the Kemp elimination is reported together with studies that demonstrate how the recognition properties, morphology, and catalytic activity of the nanoparticles can be tuned by the use of surfactants, such as Tween 20. A detailed kinetic investigation is carried out, which shows clear evidence of saturation kinetics and rule out the effects of mass transfer. This is supported by characterization of the polymeric materials that confirms the morphological changes resulting from the use of surfactants. These results provide an important tool for the development of nanoparticle-based, new catalyst-mimicking enzymes.     

The dynamic nature of amyloid beta (1-40) aggregation

In this paper, we characterize the dynamic nature of the full amyloid beta (1-40) (Aβ (1-40)) aggregates. We labeled the peptide with either 5-carboxytetramethylrhodamine (TAMRA) or with fluorescein-isothiocyanate (FITC). The labeled peptides were mixed after separate fibrillization, and the dynamic changes in the structure of the fibrils were imaged using confocal microscopy. Fluorescence resonance energy transfer (FRET) measurements showed that the Aβ (1-40) peptides detach from and reattach to the fibrils in a biologically relevant timescale (days). With time, the two peptides mix at the molecular level. This process is concentration dependent and occurs primarily in the external parts of the aggregates with a half time between 4 and 7 days. This study shows that the combination of confocal microscopy and FRET analysis is a facile method for studying dynamic processes in supra-molecular aggregates.     

Surface heterogeneity effects of activated carbons on the kinetics of paracetamol removal from aqueous solution

The removal of a compound with therapeutic activity (paracetamol) from aqueous solutions using chemically modified activated carbons has been investigated. The chemical nature of the activated carbon material was modified by wet oxidation, so as to study the effect of the carbon surface chemistry and composition on the removal of paracetamol. The surface heterogeneity of the carbon created upon oxidation was found to be a determinant in the adsorption capability of the modified adsorbents, as well as in the rate of paracetamol removal. The experimental kinetic data were fitted to the pseudo-second order and intraparticle diffusion models. The parameters obtained were linked to the textural and chemical features of the activated carbons. After oxidation the wettability of the carbon is enhanced, which favors the transfer of paracetamol molecules to the carbon pores (smaller boundary layer thickness). At the same time the overall adsorption rate and removal efficiency are reduced in the oxidized carbon due to the competitive effect of water molecules.     

Guest-induced modification of a magnetically active ultramicroporous, gismondine-like, copper(II) coordination network

A novel ultramicroporous coordination polymer, namely [Cu(F-pymo)2(H2O)1.25]n (1, F-pymo = 5-fluoropyrimidin-2-olate), has been prepared and structurally characterized. 1 displays a zeolitic gismondine (GIS) topology, with ca. 2.9 A wide helical channels which, in the thermally activated counterpart (1'), account for a 13% void volume and are responsible for the observed selective solid-gas adsorption properties toward H2, N2, and CO2. At 77 K 1' behaves as a molecular sieve, selectively adsorbing H2 over N2, possibly due to size-exclusion reasons. At variance, although CO2 molecules are slightly larger than the pore size, they are readily incorporated by 1' at temperatures as high as 433 K. Variable-temperature X-ray powder diffraction (TXRPD) studies, in the temperature range 303-473 K, show that dehydration is reversible and has almost negligible effects on the network. At variance, the uptake of CO2 occurs through a transient phase and channels expansion. While the gas storage capacity of 1' is not very high-H2, 0.56 wt % and 0.010 kg H2/L at 90 K and 900 Torr, and CO2, 7.6 wt % at 273 K and 900 Torr-the guest molecules achieve very high densities, comparable to that of the liquid for H2 (0.023 vs 0.021 molecules A-3) and to that of the solid for CO2 (0.014 vs 0.022 molecules A-3). In addition, we have also studied the effect of the perturbation exerted by the guest molecules on its magnetic properties. The results show that while dehydration of 1 has negligible effect on its spin-canted antiferromagnetic behavior, CO2 incorporation in the pores is responsible for an increment of the transition temperature at which the weak ferromagnetic ordering takes place from 22 to 29 K.     

Stochastic phenomena in a fiber Raman amplifier

The interplay of such cornerstones of modern nonlinear fiber optics as a nonlinearity, stochasticity and polarization leads to variety of the noise induced instabilities including polarization attraction and escape phenomena harnessing of which is a key to unlocking the fiber optic systems specifications required in high resolution spectroscopy, metrology, biomedicine and telecommunications. Here, by using direct stochastic modeling, the mapping of interplay of the Raman scattering‐based nonlinearity, the random birefringence of a fiber, and the pump‐to‐signal intensity noise transfer has been done in terms of the fiber Raman amplifier parameters, namely polarization mode dispersion, the relative intensity noise of the pump laser, fiber length, and the signal power. The obtained results reveal conditions for emergence of the random birefringence‐induced resonance‐like enhancement of the gain fluctuations (stochastic anti‐resonance) accompanied by pulse broadening and rare events in the form of low power output signals having probability heavily deviated from the Gaussian distribution.

     

“Magic” Dispersion Maps with Distributed Raman Amplification

We analyze pulse propagation in an optical fiber with a periodic dispersion map and distributed amplification. Using an asymptotic theory and a momentum method, we identify a family of dispersion management schemes that are advantageous for massive multichannel soliton transmission. For the case of two-step dispersion maps with distributed Raman amplification to compensate for the fiber loss, we find special schemes that have optimal (chirp-free) launch point locations that are independent of the fiber dispersion. Despite the variation of dispersion with wavelength due to the fiber dispersion slope, the transmission in several different channels can be optimized simultaneously using the same optimal launch point. The theoretical predictions are verified by direct numerical simulations. The obtained results are applied to a practical multichannel transmission system.