Theoretical Studies on the Si（001）-SiO2 Interface Structure

1 INTRODUCTION Silicon and its alloy have been widely applied in such fields as electronic industry, high-temperature structural ceramics, etc. In addition, the researches on silicon and its relevant materials greatly promote the rapid development of modern optics and infor- mation technology. Therefore, more and more at- tention is focused on the structure of silicon, oxide of silicon and the interfaces between silicon and metal or nonmetal. As an ideal passive film on the Si surface, S…     

Hydrothermal Synthesis and Crystal Structure of a Novel Isophthalate-bridged Copper(II) Polymer with Two-dimensional Network Structure: [Cu_2(phen)(ipt)_2]_(2n)·nH_2O (ipt = isophthalate, phen = 1,10-phenanthroline)

1 INTRODUCTION donor due to the presence of the protonated carboxyl group; (d) it can form short bridges via one car- Coordination polymers are of great interest due to boxylato end or long bridges via the benzene ring[7]. their physical properties and potential applications in We believe that coordination functionality of isoph- functional materials[1~3]. Aromatic polycarboxylic acids thalate can lead to interesting structures. In this com- such as 1,2,4,5-benzenetetracarboxylic acid[4],…     

Low temperature heat capacities and thermodynamic properties of rare earth triisothiocyanate hydrates——Pr(NCS)_3· 7H_2O and Nd(NCS)_3· 7H_2O

Heat capacities of Pr(NCS)3·7H2O and Nd(NCS)3· 7H2O haw been measured from 13 to 300 K by using a fully automated adiabatic calorimeter. Schottky anomaly was observed for Pr(NCS)3·7H2O below 50 K. The polynomial equations for calculating the heat capacity values of the two compounds in the range of 13-300 K were obtained by the least-squares fitting based on the experimental Cp data. The Cp values below 13 K were estimated by using the Debye-Einstein and Schottky heat capacity functions. The standard molar thermodynamic functions were computed from 0 to 300 K. The standard entropies and Gibbs energies of formation of the two compounds were also calculated.     

Synthesis and Crystal Structure of 1,4-Bis(2-hydroxymethylphenyl)-1,4-dioxabutane

1 INTRODUCTION Macrocyclic ligands and their metal complexes have received much attention due to their applications in ion transport, ion separation and as models in biomimic researches[1~7]. The synthetic methods of macrocyclic ligands and their metal complexes are mainly divided into three kinds[8]. The first one is synthesizing free ligand, then forming the metal complexes; the second is template synthesis; and the third is synthesizing the end-off or side-off precursor ligand, then c…     

水-乙醇二元体系共沸混合物的热力学研究

用全自动低温绝热量热计测定了水、乙醇以及水和乙醇组成的共沸混合物在不同温区的摩尔热容Cp,m. 建立了共沸混合物Cp,m与温度T的函数关系.结果表明,水和乙醇组成的共沸混合物在98.496 K发生玻璃态转化,在158.939 K 和270.95 K发生固-液相变.获得了其相应的相变焓和相变熵.计算了以298.15 K为基准的该共沸混合物的热力学函数和超额热力学函数.     

稀土高氯酸盐-谷氨酸配合物[Pr2(L-α-Glu)2(ClO4)(H2O)7](ClO4)3•4H2O的低温热容和热化学研究

合成了一种稀土高氯酸盐-谷氨酸配合物. 经TG/DTG、化学和元素分析、FTIR及与相关文献对比, 确定其组成为[Pr₂(L-α-Glu)₂(ClO₄)(H₂O)₇](ClO₄)₃•4H₂O, 纯度为99.0%以上. 利用显微熔点仪分析发现其没有熔点. 在78～370 K温区, 用精密绝热量热仪测量其低温热容, 在285～306 K温区发现一明显吸热峰, 归结为固-固相变过程. 通过相变温区三次重复热容测量, 得到相变温度T_tr、相变焓Δ_trH_m和相变熵Δ_trS_m分别为(297.158±0.280) K, (12.338±0.016) kJ•mol^－1和(41.520±0.156) J•K^－1•mol^－1. 用最小二乘法将非相变温区的热容对温度进行拟合, 得到了热容随温度变化的两个多项式方程. 用此方程进行数值积分, 得到每隔5 K的舒平热容值和相对于273.15 K的热力学函数值. 根据TG/DTG结果, 推测了该配合物的热分解机理. 依据Hess定律, 选择1 mol•dm^－3盐酸为量热溶剂, 利用等温环境溶解-反应量热计, 测定了该配合物的标准摩尔生成焓为: Δ_fH_m⁰＝－(7223.1±2.4) kJ•mol^－1.     

Crystal Structure and Characterization of 2-N-(2-Hydroxy-benzylidene) Furanmethanoamine Nickel(II) Complex

1 INTRODUCTION Recently, the low-spin square-planar nickel(II) complexes and high-spin octahedral nickel(II) complexes with Schiff base ligands have received much attention in optical materials[1～3]. Some nic- kel(II) complexes are widely used as lubricating oil, rubber industry additives, a fire-resistant additive and fungicide for leather[4～7]. Also, their adducts with nitrogen have attracted broad attention due to their potential applications as organic conductors and magnetic mate…     

碳纤维表面酰氯化及其与尼龙6的接枝Ⅰ、接枝方法及复合材料的力学性能

碳纤维表面酰氯化及其与尼龙6的接枝Ⅰ、接枝方法及复合材料的力学性能;阴离子接枝     

用SETARAM高温量热计测定镍铝复合粉反应温度及其生成热

镍铝复合金属粉是用于等离子表面喷镀技术的一种新材料,具有耐磨、耐腐蚀、增加工件表面强度等特殊性能。为了评价材料的性能,改进制备工艺条件提供依据,需要对这种复合粉在高温下生成金属化合物的反应热及反应温度进行测试研究。     

Thermodynamic Study of the Three Isomers of Bromobenzoic Acid

The enthalpies of sublimation and fusion and triple-point temperatures of 2-bromo-. 3-bro-mo- and 4-bromobenzoic acids have been determined precisely by sublimation calorimetry, drop calorimetry and differential thermal analysis. The measurements of sublimation enthalpy of the three acids were made at 333, 348 and 363 K, respectively, using a Tian-Calvet microcalorimeter equipped with Knudsen effusion cells. The derived standard molar enthalpies of sublimation at 298.15 K are (95. 94±0. 41), (99. 20± 0.18), and (103. 08±0. 59) kJ · mol-1for the 2-bromo-, 3-bromo- and 4-bromobenzoic acids, respectively. In addition, the saturated vapour pressure of these compounds was also calculated on the basis of the sublimation experiments. The enthalpy of fusion, the triple-point temperatures and the mole fraction purities of the samples of the investigated substances were measured using the mean temperature version DTA apparatus developed by the CTM of the CNRS in Marseille. The triple-point temperature and the