Structural and Electrical Characteristics of Pb（Zr0.53,Ti0.47）O3 Thin Films Deposited on Si （100） Substrates

Pb(Zr0.53, Ti0.47)O3 (PZT) films were directly deposited on Si substrates without a buffer layer by pulsed laser deposition. Only(110)-oriented PZT peaks (other than Si substrate peaks) were observed from the XRD data. The electrical properties of the PZT/Si capacitor were characterized in terms of both the capacitance versus voltage (C-V) and current versus voltage (I-V) measurements. The clockwise trace of the C-V curve shows ferroelectric polarization switching, as is expected. From the I-V curves, the Schottky emission and spacecharge-limited-current behaviour are found to be the mainly leakage current mechanism in a certain electric field range in the negative and positive bias, respectively.     

刺五加味中黄酮类化合物的分析

利用电喷雾多级串联质谱（ESI－MS^n)技术，分析了刺五加叶中黄酮类化合物，并根据黄酮类化合物的特征显色反应，采用紫外－可见分光光度法，对刺五加叶中总黄酮的含量进行了测定。分析结果表明：刺五加叶含有槲皮素及其相关的黄酮甙类化合物，其含量达37．25％。     

一种适用于无程序升温的气液色谱仪的综合填充柱

目前,我国有一半以上的气液色谱仪没有程序升温装置,要在恒温下对不同沸点和不同极性的混合物高效分离,选择理想的柱子就成为一个关键问题,特别是在裂解色谱法中,高聚物裂解出的产物品种多,分子量范围宽,极性大小不一的情况下选择高效分离柱就更为重要。为了克服色谱仪无程序升温装置的缺陷,我们选用了三段串联填充柱,在恒温下能使复杂的裂解产物得到分离,并已成功地用于多种高聚物裂解产物的分离。     

微乳液体系相图的研究及其在纳米氟化物制备中的应用

绘制了十六烷基三甲基溴化铵(CTAB)/正丁醇(n-C₄H₉OH)/正辛烷(n-C₈H₁₈)/水[或NH₄F溶液、或Ba(NO₃)₂溶液、或KNO₃-Mg(NO₃)₂混合溶液]四组分微乳体系的拟三元相图.观察了电导率随水(或盐溶液)含量变化的规律,很好地印证了微乳液体系的相行为.选取相图中微乳区点作为最佳条件,制备了KMgF₃纳米粒子.     

PtSn/Al2O3/MCM-41催化剂的丙烷脱氢催化性能

用微型催化反应装置评价,并结合X射线粉末衍射(XRD)、表面积和孔结构测试、程序升温还原(TPR)、氢化学吸附和热重分析等方法研究了负载型PtSn/γ-Al2O3,PtSn/MCM-41和PtSn/Al2O3/MCM-41催化剂的丙烷脱氢反应催化性能.发现PtSn/Al2O3/MCM-41催化剂具有较PtSn/MCM-41催化剂高的丙烷脱氢反应活性和较PtSn/γ-Al2O3催化剂高的反应稳定性.实验结果表明,纯硅MCM-41载体表面的锡物种因与载体相互作用较弱故易被还原,导致铂金属分散度和催化剂的丙烷脱氢活性较低.用Al2O3修饰MCM-41可以增强Sn物种与Al2O3/MCM-41载体之间的相互作用,提高PtSn/Al2O3/MCM-41催化剂铂金属分散度和丙烷脱氢催化活性.并且,积炭后的PtSn/Al2O3/MCM-41催化剂具有较高的铂金属表面裸露度,故具有较高的丙烷脱氢反应稳定性.PtSn/Al2O3/MCM-41催化剂优良的丙烷脱氢催化性能町能不仅与Sn-载体Al2O3/MCM-41较强的相互作用有关,而且与Al2O3/MCM-41载体的介孔结构有关.     

卟啉-蒽醌化合物分子内光诱导电子传递的光谱研究

合成了以不同长度柔韧碳链相连的三种卟啉(Por)-蒽醌(AQ)二元化合物Por-Cn-AQ (n=1,4,10),主要通过稳态荧光光谱和瞬态荧光光谱研究了它们的分子内光诱导电子传递情况,并结合密度泛函理论(DFT)对分子内电子转移机理进行了初步探讨.结果表明:共价相连的卟啉-蒽醌二元化合物在光激发下能够发生从卟啉组分到蒽醌组分的分子内光诱导电子传递;连接链性质对电子传递速率有直接的影响.实验和理论计算结果表明卟啉-蒽醌之间的分子内电子转移很可能是通过超交换机理进行的.     

Dispersion state and catalytic properties of vanadia species on the surface of V_2O_5/TiO_2 catalysts

The dispersion state and catalytic properties of anatase-supported vanadia species are studied by means of X-ray diffraction (XRD), laser Raman spectroscopy (LRS), H2 temperature-programmed reduction (TPR) and the selective oxidation of o-xylene to phthalic anhydride. The almost identical values of the experimental dispersion capacity of V2O5 on anatase and the surface vacant sites available on the preferentially exposed (001) plane of anatase suggest that the highly dispersed vanadium cations are bonded to the vacant sites on the surface of anatase as derived by the incorporation model. When the loading amount of V2O5 is far below its dispersion capacity, the dispersed vanadia species might mainly consist of isolated VOx species bridging to the surface through V-O-Ti bonds. With the increase of V2O5 loading the isolated vanadia species interact with their nearest neighbors (either isolated or polymerized vanadia) through bridging V-O-V at the expenses of V-O-Ti bonds, resulting in the increase of the ra     

1H和19F NMR研究镍系催化丁二烯聚合中醇类对BF3·Oet2的增溶作用

The solubility of BF₃OEt₂ in hydrogenated gasoline was improved greatly by means of premixing BF₃OEt₂ with C₃H₁₇OH in nickel catalyst system, so that the effeciency of fluorine in the system was increased markedly. It is confirmed that there was a intermolecular hydrogen bond between alcohol and BF₃OEt₂ molecules by using ¹H NMR, which was a vital factor to lead the solubilization of BF₃OEt₂ in hydrogenated gasoline. Otherwise, the caculation formula of the chemical shift ofproton in hydroxy, ¹H = xipi,was suggested in hydrogen bond system.     

NO选择性催化还原Ce-Mn-Ti-O催化剂铈组分助催化作用

用NH3程序升温脱附(NH3-TPD)、X射线衍射(XRD)、X射线光电子能谱(XPS)、H2程序升温还原(H2-TPR)和BET表面积测试结合NO选择性催化还原(SCR)微型反应评价等方法,研究了溶胶-凝胶法制备的Ce-Mn-Ti-O复合氧化物催化剂中铈组分的助催化作用.结果表明随铈含量增加,NO转化率大幅度增加,在Ce/Mn摩尔比约0.08时达极大值,其后随铈含量进一步增加,NO转化率又逐渐下降.适量铈组分的加入对Mn-Ti-O催化剂表面酸性影响不大,但增加了催化剂活性组分Mn物种的表面浓度,提高了Mn4+物种的相对含量和Mn物种的可还原性,从而提高催化剂低温SCR活性.当Ce/Mn摩尔比超过0.08,催化剂表面的Mn组分与Ce组分可能形成无定型结构的多层聚集的Ce-O-Mn物种,导致催化剂Mn/Ti摩尔比下降和Mn物种可还原性下降,从而导致催化剂SCR活性的下降.     

高能机械球磨法制备V-Ti-O超细微粒催化剂

负载型V2O5/TiO2氧化物催化剂因具有优良的催化性能而广泛地用于烃类选择性氧化[1,2]和氮氧化物选择性催化还原(SCR)[3]. 迄今,所研究的负载型V2O5/TiO2氧化物催化剂大多是采用浸渍法制备的[2,4～6],通过调整催化剂的组成[2,5]、引入适当的助剂组分[2,6]和选择适宜的反应操作条件[2,5]可进一步优化其催化性能.