数学问题解答

20 0 2年 8月号问题解答(解答由问题提供人给出 )1 3 86　试证明 :有两边及一个角的角平分线对应相等的两个三角形全等 .(湖北宜昌市十一中学　是海松　443 0 0 3 )证明　设△ＡＢＣ和△Ａ′Ｂ′Ｃ′的三边分别记为ａ、ｂ、ｃ和ａ′、ｂ′、ｃ′,三条角平分线分别记为ｔａ、ｔｂ、ｔｃ和ｔａ′、ｔｂ′、ｔｃ′,半周长分别记为ｐ和ｐ′.当有两边及它们的夹角的平分线对应相等时 ,不妨设ｂ=ｂ′,ｃ =ｃ′,ｔａ =ｔａ′.由ｔａ =2ｂ+ｃ ｂｃｐ(ｐ -ａ) ,ｔａ′ =2ｂ′+ｃ′ ｂ′ｃ′ｐ′(ｐ′ -ａ′)得 :2ｂ+ｃ ｂｃｐ(ｐ -ａ) =2ｂ+ｃ ｂｃｐ…     

Effects of Substrate Temperature on Helium Content and Microstructure of Nanocrystalline Titanium Films

Helium-charged nanocrystalline titanium films have been deposited by HeAr magnetron co-sputtering. The effects of substrate temperature on the helium content and microstructure of the nanocrystalline titanium films have been studied. The results indicate that helium atoms with a high concentration are evenly incorporated in the deposited titanium films. When the substrate temperature increases from 60℃ to 350℃ while the other deposition＇parameters are fixed, the helium content decreases gradually from 38.6 at.% to 9.2at.%, which proves that nanocrystalline Ti films have a great helium storage capacity. The 20 angle of the Bragg peak of （002） crystal planes of the He-charged Ti film shifts to a lower angle and that of （100） crystal plane is unchanged as compared with that of the pure Ti film, which indicates that the lattice parameter c increases and a keeps at the primitive value. The grain refining and helium damage result in the diffraction peak broadening.     

100μm远红外FEL系统单一微波源实验

自由电子激光性能主要取决于电子束的品质，而电子束的品质主要依赖于微波加速场的稳定。特别是对自由电子激光用户装置，对微波源的稳定性要求更高。中物院FEL必须解决的问题其中之一有必须提高FEL自发辐射的稳定性。设计的系统中因采用了两个速调管放大器分别给注入器和加速器提供微波功率，两个放大器相位的抖动(随机的)自然会引起能量的变化，尤其在低能段还会影响到束流的品质。2003年采用了中科院电子所首批研制的KL-54速调管进行单波源改进实验，为了减少微波传输中的损耗，引进了3端口大功率环行器，使功率损耗减少了20％，与此同时设计生产了大功率电调功分器和电调移相器，使单一微波源建立起来，达到了满意的结果。     

不同羧酯化的聚马来酸十八醇酯齐聚物的镉盐LB膜成膜特…

由聚马来酸酐和十八醇合成了一系列不同羧酯比的聚马来酸十八醇酯，并以其为成膜材料，ＣｄＣｌ２水溶液为亚相制备了一系列聚马来酸十八醇酯镉盐ＬＢ膜，借助小角Ｘ射线衍射和红外吸收光谱表征了成膜条件及羧酯比对ＣｄＰＭＡ膜有序结构的影响。在较高膜压和快速提拉条件下，低羧酯比的ＣｄＰＭＡ可得到有序性很高的Ｙ－型ＬＢ多层膜；高羧酯比的ＣｄＰＭＡ得不到高有序性的ＬＢ多层膜。     

Structural Phase Transformations of ZnS Nanocrystalline Under High Pressure

In-situ energy dispersive x-ray diffraction on ZnS nanocrystalline was carried out under high pressure by using a diamond anvil cell. Phase transition of wurtzite of 10nm ZnS to rocksalt occurred at 16.0GPa, which was higher than that of the bulk materials. The structures of ZnS nanocrystalline at different pressures were built by using materials studio and the bulk modulus, and the pressure derivative of ZnS nanocrystalline were derived by fitting the equation of Birch-Murnaghan. The resulting modulus was higher than that of the corresponding bulk material, which indicates that the nanomaterial has higher hardness than its bulk materials.     

Design and Fabrication of 1.06 μm Resonant-Cavity Enhanced Reflective Modulator with GaInAs/GaAs Quantum Wells

A resonant-cavity enhanced reflective optical modulator is designed and fabricated, with three groups of three highly strained InGaAs/GaAs quantum wells in the cavity, for low voltage and high contrast ratio operation. The quantum wells are positioned in antinodes of the optical standing wave. The modulator is grown in a single growth step in an molecular beam epitaxy system, using GaAs/AlAs distributed Bragg reflectors as both the top and bottom mirrors. Results show that the reflection device has a modulation extinction of 3 dB at -4.5 V bias.     

A MEMS-Based Piezoelectric Power Generator for Low Frequency Vibration Energy Harvesting

A novel power generator has been achieved to convert vibration to electrical energy via the piezoelectric effect. The generator obtained by micro fabrication process mainly consists of silicon based frame and composite cantilever. The prototype tested at resonant vibration generates 1.15μW of effective power to a 20.4-kΩ resistance load. The potential of this work is to offer miniaturization solutions for power generators, and with the proposed method the ambient ubiquitous vibration can be harvested effectively as endless energy source to form an integrated self-powering system.     

海螵蛸入药部分和废弃部分8种无机元素分析

为合理开发利用海螵蛸 ,用原子吸收分光光度法测定了海螵蛸中入药部分和废弃部分中8种人体必需无机元素含量。结果表明 ,入药部分和废弃部分中钙含量丰富 ,分别达到 742 1 3× 1 0 - 3和 65 9 76× 1 0 - 3。入药部分铜、铁含量较废弃部分高 ,分别为 9 41× 1 0 - 6 、 91 86× 1 0 - 6 和2 3 5× 1 0 - 6 、 2 5 7× 1 0 - 6 。废弃部分含锌丰富 ,为 3 5 3 62× 1 0 - 6 ,数倍于入药部分 64 65× 1 0 - 6 。可见海螵蛸入药部分和废弃部分均具有良好的开发前景