排序方式: 共有79条查询结果,搜索用时 15 毫秒
1.
Based on scalar diffraction theory, 8-phase-level 256×256 elements diffractive microlens array with element dimension of 50×33 μm2 have been fabricated on the back-side of PtSi(3~5 μm) infrared CCD. The measurement results indicated that the ratio of the signal-to-noise of the infrared CCD with microlens was increased by a factor of 2.8. 相似文献
2.
采用戊二醛法, 将4-硝基苯乙胺与牛血清蛋白(BSA)和卵清蛋白(OVA)共价偶联, 分别合成了免疫原4-硝基苯乙胺-BSA和包被原4-硝基苯乙胺-OVA, 经紫外分光光度计及飞行时间质谱扫描鉴定. 用合成的免疫抗原免疫新西兰大白兔, 并用合成的包被原进行间接竞争酶联免疫(ELISA)试验, 获得的抗血清效价达1∶32000. 方阵实验确定了包被抗原最佳浓度(0.5 mg/L)及抗血清最佳稀释度(1∶6000), 并建立了间接竞争ELISA方法. 工作曲线表明在1~1000 μg/L浓度范围内呈良好的线性关系, 该法IC50值为(52.73±2.67) μg/L, 检测限为5.12 μg/L. 其它类似结构不干扰硝基苯胺的测定. 成功地建立了硝基苯胺类化合物的间接竞争酶免疫化学分析方法. 相似文献
3.
Effects of multiple interruptions with trimethylindium-treatment in the InGaN/GaN quantum well on green light emitting diodes 下载免费PDF全文
In this study, the influence of multiple interruptions with trimethylindium(TMIn)-treatment in InGaN/GaN multiple quantum wells(MQWs) on green light-emitting diode(LED) is investigated. A comparison of conventional LEDs with the one fabricated with our method shows that the latter has better optical properties. Photoluminescence(PL) full-width at half maximum(FWHM) is reduced, light output power is much higher and the blue shift of electroluminescence(EL) dominant wavelength becomes smaller with current increasing. These improvements should be attributed to the reduced interface roughness of MQW and more uniformity of indium distribution in MQWs by the interruptions with TMIn-treatment. 相似文献
4.
The energy band properties, density of states, and band alignment of the BexZn1-xO1-ySy alloy (Be- and S-doped wurtzite ZnO) are investigated by the first-principles method. BexZn1-xO1-ySy alloy is a direct band gap semiconductor, the valence band maximum (VBM) and the conduction band minimum (CBM) of BexZn1-xO1-ySy are dominated by S 3p and Zn 4s states, respectively. The band gap and lattice constant of BexZn1-xO1-ySy alloy can be modulated by changing the doped content values x and y. With the increase in Be content value x in the BexZnl-xOl-ySy alloy, the band gap increases and the lattice constant reduces, but the situation is just the opposite when increasing the S content value y in the BexZn1-xO1-ySy alloy. Because the lattice constant of Be0.375Zn0.625O0.75S0.25 alloy is well matched with that of ZnO and its energy gap is large compared with that of ZnO, so the Be0.375Zn0.625O0.75S0.25 alloy is suitable for serving as the blocking material for a high-quality ZnO-based device. 相似文献
5.
In reactor neutrino experiments, the analysis of time correlations between different physical events is an important task. Such analysis can help to understand the physical mechanisms of the signal and background events as well as the details of event selection and background estimation. This study investigates a "sampling and mixing" method used for producing large MC data samples for the Daya Bay reactor neutrino experiment. We designed a simple, generic mixing algorithm and generated large MC data samples for physics analysis from several samples according to their respective event rates. Basic plots based on the mixed data are shown. 相似文献
6.
近年来,环境内分泌干扰物愈来愈受到人们的关注。对其用传统的检测技术分析,过程复杂、耗时长、价格昂贵,因此急需发展灵敏度高、反应迅速快、价格低廉的检测手段。介绍了一种平面波导型阵列倏逝波荧光生物传感器,在对系统光路参数进行模拟优化的基础上,可实现24个传感位点的同步、快速、灵敏检测。基于此阵列倏逝波荧光传感器,运用间接竞争免疫检测模式,优化并建立环境内分泌干扰物雌二醇的标准检测条件。实验结果表明,入射角在61.8°时,系统灵敏度最高。该方法对雌二醇检测线性检测区间为0.08~2.52 μg·L-1,检测限为0.05 μg·L-1,半抑制浓度为0.46 μg·L-1,完成单次样品的检测时间为20 min。利用该传感器对污水处理厂出水进行加标回收测试,回收率在84%~120%之间,相对标准偏差小于15%,表明该方法能够用于实际水体中雌二醇的快速检测。 相似文献
7.
8.
9.
以甲基丙烯酰氯、三乙胺和荧光素反应得到荧光素甲基丙烯酸酯(FMA),将其与聚N-(2-羟丙基)甲基丙烯酰胺(HPMA)以物质的量之比1∶10混合并通过引发剂偶氮二异丁腈(AIBN)引发聚合反应,生成带有荧光探针的聚合物P(HPMA-FMA)。采用台盼蓝排染法评估了该聚合物的细胞毒性,荧光显微镜和流式细胞仪观察和检测了全反式维甲酸(ATRA)诱导HL-60细胞分化过程中,P(HPMA-FMA)被细胞吞噬后的荧光示踪效应。结果表明:P(HPMA-FMA)的细胞毒性极低,当P(HPMA-FMA)的质量浓度为4~16mg/mL时对细胞增殖无影响;当其质量浓度为30μg/mL时即可满足荧光显微镜定性示踪观察和流式细胞术定量检测所需要的荧光强度。 相似文献
10.
采用高温熔融法制备了一定质量比例的SiO_2-YAG∶Ce~(3+)片状荧光玻璃,厚度为0.2 mm,分析其XRD物相、光学和SEM微观结构、PL光谱。结果表明:荧光玻璃保留了晶相,荧光粉颗粒在玻璃基质中均匀分布,荧光玻璃和荧光粉的激发响应关系一致。在465 nm蓝光激发下,发射波长均在535 nm附近,表明荧光玻璃除含有玻璃相,还有荧光粉的物质结构特性。将不同波长蓝光芯片与不同荧光粉含量的荧光玻璃进行封装测试,结果表明:器件的流明效率可达到234.81 lm/W;色温和显色指数均随荧光粉含量增加而单调下降,呈现高色温和低显色指数;荧光粉质量分数从6%增加至15%时,不同波长激发下的色坐标x与y呈现大致相同的线性变化率。采用450 nm激光激发荧光玻璃,测试样品温度变化发现温升较缓,温降迅速,耐热性能优越。实验结果表明,将荧光玻璃用于LED白光照明封装,能实现流明效率和耐热性能的大幅提升,形成良好的白光输出。 相似文献