上市公司财务会计信息披露问题的研究

分析了我国上市公司财务会计信息披露不规范的成因 ,在此基础上 ,提出了规范上市公司财务会计信息披露的有效对策。     

FET振荡器注入锁相伏特拉级数分析

应用伏特拉级数法分析了电容耦合ＦＥＴ振荡系统在外加信号下的注入锁定现象，推导出输出信号和注入锁定带宽表达式。与一般非线性系统分析方法相比，伏特拉级数法在建立好系统模型后只需进行代数运算，从而避开了求解非线性，非齐次高阶微分方程的复杂过程。     

Parametric Rao Test for Multichannel Adaptive Signal Detection

The parametric Rao test for a multichannel adaptive signal detection problem is derived by modeling the disturbance signal as a multichannel autoregressive (AR) process. Interestingly, the parametric Rao test takes a form identical to that of the recently introduced parametric adaptive matched filter (PAMF) detector for space-time adaptive processing (STAP) in airborne surveillance radar systems and other similar applications. The equivalence offers new insights into the performance and implementation of the PAMF detector. Specifically, the Rao/PAMF detector is asymptotically (for large samples) a parametric generalized likelihood ratio test (GLRT), due to an asymptotic equivalence between the Rao test and the GLRT. The asymptotic distribution of the Rao test statistic is obtained in closed form, which follows an exponential distribution under the null hypothesis H ₀ and, respectively, a noncentral Chi-squared distribution with two degrees of freedom under the alternative hypothesis H ₁. The noncentrality parameter of the noncentral Chi-squared distribution is determined by the output signal-to-interference-plus-noise ratio (SINR) of a temporal whitening filter. Since the asymptotic distribution under H ₀ is independent of the unknown parameters, the Rao/PAMF asymptotically achieves constant false alarm rate (CFAR). Numerical results show that these results are accurate in predicting the performance of the parametric Rao/PAMF detector even with moderate data support.     

基于ADAMS/Aircraft的起落架滑跑模型仿真

以小车式起落架为例,利用ADAMS/Airc- raft建立了起落架滑跑试验仿真模型.给出了起落架滑跑运动方程,并进行了滑跑试验仿真分析。仿真结果与理论要求对比具有较好的一致性。     

在二元柔壁自适应风洞中利用面元法进行三元模型实验

简要叙述了在西北工业大学二元柔壁自适应风洞中利用面元法进行二元半机翼模型试验的研究情况，分析了面元法的基本思想和部分试验结果。     

High speed driving of a gain-switched laser diode with anexponential transmission line

With the increase of information capacity of an airborne system, high speed driving of laser diodes have been of interest. In order to match the low resistive LD, proposed in this paper is an exponential transmission line, which is used as preshaping to compensate the pattern effect in gain switching of laser diodes. It also will be used to overcome the effect of parasitic elements in high speed driving to improve the rise and trail edges of the output waveform. An accurate circuit model of the exponential line for the PSPICE program has been developed and simulations are conveniently carried out by employing PSPICE     

On adaptive spatial-temporal processing for airborne surveillanceradar systems

Implementing the optimum spatial-temporal (angle-Doppler) processor involves two crucial issues: the selection of processing configurations, and the development of adaptive algorithms which can efficiently approach the performance potential of the selected configuration. Among the three available configurations, the joint-domain, the cascade space-time, and the cascade time-space, this work shows that, in contrast to a popular belief, the detection performance potentials of both cascade configurations can fall far below that of the joint-domain optimum. In addition, this work presents a new adaptive algorithm, called the Joint-Domain Localized Generalized Likelihood Ratio detection (JDL-GLR), which is data efficient i.e., with fast convergence to the joint-domain optimum, as well as computationally efficient, together with such desirable features as the embedded constant false-alarm rate (CFAR) and robustness in non-Gaussian interference     

波导分支线定向耦合器计算方法

利用模匹配方法和网络理论分析计算了一种卫星天线系统中常用的波导分支线定向耦合器,计算结果与实验结果非常吻合。该方法为波导分支线定向耦合器提供一种有力的设计手段。它可直接用于设计Ku 波段通信卫星天线的波束形成网络,也可以用来设计各种耦合度的波导分支线定向耦合器。     

浅谈发挥低年级学生学习英语的积极性

英语教学，特别是低年级英语教学既需要教师的积极性，更需要学生的积极性，二者缺一不可。要想发挥学生的学习积极性，首先应发挥英语自身的魅力，启发学生的积极性；其次，以情感促教学调动学生的积极性；再者，采取有效措施巩固学生的积极性。     

三维模型中关键特性标注和提取的实现

关键特性作为"少数重要"的产品信息,是保证产品质量和顾客满意度的重要因素,其指定和标识需要与三维模型相结合才具有更直观的意义,同时也方便对其进行更有效的管理.本文给出了关键特性的定义和分类,提出了三维模型中关键特性的标注方法,通过对UG进行二次开发,实现了关键特性的属性添加和信息提取,并通过某型导弹弹头舱段壳体零件进行了验证.