Furniture wood wastes: Experimental property characterisation and burning tests

Referring to the industrial wood waste category (as dominant in the provincial district of Pesaro-Urbino, Marche Region, Italy), this paper deals with the experimental characterisation and the carrying out of non-controlled burning tests (at lab- and pilot-scale) for selected “raw” and primarily “engineered” (“composite”) wood wastes.The property characterisation has primarily revealed the following aspects: potential influence on moisture content of local weather conditions at outdoor wood waste storage sites; generally, higher ash contents in “engineered” wood wastes as compared with “raw” wood wastes; and relatively high energy content values of “engineered” wood wastes (ranging on the whole from 3675 to 5105 kcal kg⁻¹ for HHV, and from 3304 to 4634 kcal kg⁻¹ for LHV).The smoke qualitative analysis of non-controlled lab-scale burning tests has primarily revealed: the presence of specific organic compounds indicative of incomplete wood combustion; the presence exclusively in “engineered” wood burning tests of pyrroles and amines, as well as the additional presence (as compared with “raw” wood burning) of further phenolic and containing nitrogen compounds; and the potential environmental impact of incomplete industrial wood burning on the photochemical smog phenomenon.Finally, non-controlled pilot-scale burning tests have primarily given the following findings: emission presence of carbon monoxide indicative of incomplete wood combustion; higher nitrogen oxide emission values detected in “engineered” wood burning tests as compared with “raw” wood burning test; and considerable generation of the respirable PM₁ fraction during incomplete industrial wood burning.     

Population genetic structure of the prosobranch Nassarius reticulatus (L.) in a ria seascape (NW Iberian Peninsula) as revealed by RAPD analysis

Randomly amplified polymorphic DNA (RAPD) banding patterns were compared between samples of the netted dogwhelk Nassarius reticulatus from 11 locations along the NW Iberian Peninsula coast. To detect if rias (estuaries formed by drowned river valleys) might promote genetic differentiation, five sampling sites were located within a ria (ria of Muros) and the remaining six were scattered along open-coast areas at increasing distances from the ria mouth. Population differentiation statistics (Φ-values) were estimated using a hierarchical analysis of molecular variance (AMOVA) with samples sorted into two groups: open-coast and ria populations. Despite a high potential to disperse, AMOVA demonstrated a modest, statistically significant genetic heterogeneity among N. reticulatus populations. Most of the genetic structure resided in differences among open-coast populations; ria populations were genetically homogeneous. No obvious geographical pattern was detected for the pairwise genetic distances (non-metric multidimensional scaling; UPGMA tree; Mantel test). Unlike previous studies with other species at a variety of estuarine systems other than rias, there was no evidence that the ria of Muros may enhance the genetic divergence of N. reticulatus populations. This discrepancy is discussed in relation to the biological features of the species (high dispersal potential and a preference for mid-low estuarine habitat) and the strong hydrographic connectivity between ria and neighbouring off-shore waters.     

Exposure to Selected Heavy Metals Through Water Ingestion in an Area Under the Influence of Tanneries

This study evaluated the potential toxicological risk posed to human health due to the exposure to heavy metals by water ingestion in an area affected by tanneries – the Cadeia-Feitoria hydrographic basin (Brazil). River water was collected at 10 sites, every 3 months, from July 1999 to April 2000. After acid digestion, total metal concentration was determined by inductively coupled plasma optical emission spectrometry (Cd, Cu, Cr, Ni, Zn), flame atomic absorption (Al, Fe, Pb, Mn), or cold vapor atomic absorption spectrometry (Hg). Cr(VI) was complexed with diphenyl-carbazide and detected by UV–vis spectrometry. In order to quantify the risk of exposure, the risk assessment methodology employed by the Environmental Protection Agency of the United States was applied at a screening level. The assumed scenarios included extreme exposure patterns (ingestion of untreated water, conversion of Cr(III) to Cr(VI), temporal peaks of pollution). Fe, Al, Cd, Hg, and Pb were not included in the risk analysis, since they showed a low toxicity potential or were undetected in the samples. The selected metals presented Hazard Quotients < 1, in the following order of increasing risk: Cu < Cr(III) < Zn < Ni < Mn < Cr(VI). Hazard indexes, representing the additive effect of contaminants, were also low in the basin (< 1), but comparatively increased in the lower reach of Feitoria and Cadeia Rivers. Although noncarcinogenic risk levels did not suggest possible adverse toxicological effects to the human population, a considerable deviation from background conditions was observed downstream the area where tanneries are mainly located.     

Material and energy recovery in integrated waste management systems. An evaluation based on life cycle assessment

This paper reports the environmental results, integrated with those arising from mass and energy balances, of a research project on the comparative analysis of strategies for material and energy recovery from waste, funded by the Italian Ministry of Education, University and Research. The project, involving the cooperation of five University research groups, was devoted to the optimisation of material and energy recovery activities within integrated municipal solid waste (MSW) management systems. Four scenarios of separate collection (overall value of 35%, 50% without the collection of food waste, 50% including the collection of food waste, 65%) were defined for the implementation of energetic, environmental and economic balances. Two sizes of integrated MSW management system (IWMS) were considered: a metropolitan area, with a gross MSW production of 750,000 t/year and an average province, with a gross MSW production of 150,000 t/year. The environmental analysis was conducted using Life Cycle Assessment methodology (LCA), for both material and energy recovery activities. In order to avoid allocation we have used the technique of the expansion of the system boundaries. This means taking into consideration the impact on the environment related to the waste management activities in comparison with the avoided impacts related to the saving of raw materials and primary energy. Under the hypotheses of the study, both for the large and for the small IWMS, the energetic and environmental benefits are higher than the energetic and environmental impacts for all the scenarios analysed in terms of all the indicators considered: the scenario with 50% separate collection in a drop-off scheme excluding food waste shows the most promising perspectives, mainly arising from the highest collection (and recycling) of all the packaging materials, which is the activity giving the biggest energetic and environmental benefits. Main conclusions of the study in the general field of the assessment of the environmental performance of any integrated waste management scheme address the importance of properly defining, beyond the design value assumed for the separate collection as a whole, also the yields of each material recovered; particular significance is finally related to the amount of residues deriving from material recovery activities, resulting on average in the order of 20% of the collected materials.     

Integrated hydrologic–economic decision support system for groundwater use confronting climate change uncertainties in the Tunuyán River basin,Argentina

This study presents an integrated hydrologic–economic model as decision support system for groundwater use and incorporates uncertainties of climate change. The model was developed with the Vensim software (Ventana Systems) for system dynamic simulations. The software permitted the integration of economic variables along with hydrologic variables, in a unified format with the aim of evaluating the economic impacts of climate change on arid environments. To test the model, we applied it in one of the upper Tunuyán River sub-basin, located in the Mendoza Province (Argentina), where irrigation comes from groundwater. The model defines the best mix of crops and the total land use required to maximize the total river sub-basin monetary income, considering as a limit the amount of water that does not exceed the natural annual aquifer recharge. To estimate the impacts of climatic changes, four scenarios were compared: the business as usual (with the number of existing wells) in a dry year with a temperature increase of 4 °C; the business as usual in a wet year with an increase in temperature of 1.1 °C; an efficient use of wells in a dry year and a temperature increase of 4 °C and an efficient use of wells in a wet year with a temperature increase of 1.1 °C. Outputs calculated by the model were: land use per crop, total sub-basin net benefit, total sub-basin water extraction, water extraction limit depending on river discharge and total number of wells required to irrigate the entire area. Preliminary results showed that the number of existing wells exceeded the optimized number of wells required to sustainably irrigate the entire river sub-basin. Results indicated that in an average river discharge year, if wells were efficiently used, further rural development would be possible, until the limit of 350 million m³ of water extraction per year was reached (650 million m³ for a wet year and 180 million m³ for a dry year). The unified format and the low cost of the software license make the model a useful tool for Water Resources Management Institutions, particularly in developing countries.     

Biodegradation of aromatic hydrocarbons by Haloarchaea and their use for the reduction of the chemical oxygen demand of hypersaline petroleum produced water

Ten halophilic Archaea (Haloarchaea) strains able to degrade aromatic compounds were isolated from five hypersaline locations; salt marshes in the Uyuni salt flats in Bolivia, crystallizer ponds in Chile and Cabo Rojo (Puerto Rico), and sabkhas (salt flats) in the Persian Gulf (Saudi Arabia) and the Dead Sea (Israel and Jordan). Phylogenetic identification of the isolates was determined by 16S rRNA gene sequence analysis. The isolated Haloarchaea strains were able to grow on a mixture of benzoic acid, p-hydroxybenzoic acid, and salicylic acid (1.5 mM each) and a mixture of the polycyclic aromatic hydrocarbons, naphthalene, anthracene, phenanthrene, pyrene and benzo[a]anthracene (0.3 mM each). Evaluation of the extent of degradation of the mixed aromatic hydrocarbons demonstrated that the isolates could degrade these compounds in hypersaline media containing 20% NaCl. The strains were shown to reduce the COD of hypersaline crude oil reservoir produced waters significantly beyond that achieved using standard hydrogen peroxide treatment alone.     

Dental enamel as biomarker for environmental contaminants in relevant industrialized estuary areas in São Paulo,Brazil

Heavy metal contamination is a long-standing and very well-known public health problem, and its exposure can cause damage to several organs of human body, especially on the central nervous system of young children and teenagers. The aim of this article is to evaluate lead, cadmium, and manganese contamination in 125 children from 6 to 13 years old living in contaminated areas during the period from 2006 to 2009 (São Vicente, Cubatão Downtown, Bertioga and Cubatão Pilões/Água Fria). This estuary area is the most important example of environmental degradation by chemicals from industrial sources. This is a cross-sectional study through clinical examinations and dental enamel tests. All mothers from these children lived in the area since before the pregnancy. Lead, cadmium, and manganese levels (μg/g) were measured on dental enamel samples through graphite furnace atomic absorption spectrometry, searching for the occurrence of heavy metals. The mean lead concentrations were 139.48 μg/g in Cubatão Pilões/Água Fria, 170.45 μg/g in Cubatão Downtown, 213.52 μg/g in São Vicente, and 151.89 μg/g in Bertioga. The mean cadmium concentrations were 10.83 μg/g in Cubatão Pilões/Água Fria, 12.58 μg/g in Cubatão Downtown, 10.92 μg/g in São Vicente, and 14.57 μg/g in Bertioga. The mean manganese concentrations were 23.49 μg/g in Cubatão Pilões/Água Fria, 30.90 μg/g in Cubatão Downtown, 41.46 μg/g in São Vicente, and 42.00 μg/g in Bertioga. Dental surface enamel may be used as an efficient biomarker of past environmental exposure to lead, manganese, and cadmium which are associated to well-known sources of heavy metal contamination. The results suggest that the evaluated children were exposed to sources of lead, cadmium, and manganese since before their conceptions. Although Bertioga initially was chosen as a control area of this study, it was also was verified to have heavy metal contamination on examined children.     

Dieldrin uptake by vegetable crops grown in contaminated soils

The aim of these trials was to study the distribution of dieldrin in soil and its translocation to roots and the aerial parts of vegetable crops grown in greenhouses and fields. The main objectives were to characterize dieldrin accumulation in plant tissues in relation to the levels of soil contamination; uptake capability among plants belonging to different species, varieties and cultivars. The presence of the contaminant was quantified by gas chromatography-electron capture detector (GC-ECD) and confirmed by gas chromatography-mass spectrometer (GC-MS). The results showed a translocation of residues in cucurbitaceous fruits and flowers confirming that zucchini, cucumber and melon are crops with high uptake capability. The maximum level of dieldrin residue at 0.01 mg/kg was found to be a threshold value to safeguard the quality production of cucurbits. Tomato, lettuce and celery were identified as substitute crops to grow in contaminated fields.     

DDT, DDE, and 1-hydroxypyrene levels in children (in blood and urine samples) from Chiapas and Oaxaca, Mexico

The aim of this study was to evaluate the DDT, DDE, and 1-hydroxypyrene exposure levels of children living in communities located in southeastern Mexico. The study communities were Lacanja and Victoria in Chiapas state and Ventanilla in Oaxaca state. Children living in Lacanja had total blood DDT levels (mean?±?SD, 29,039.6?±?11,261.4 ng/g lipid) that were significantly higher than those of children in Victoria (10,220.5?±?7,893.1 ng/g lipid) and Ventanilla (11,659.7?±?6,683.7 ng/g lipid). With respect to the 1-hydroxypyrene levels in urine samples, the levels in Lacanja (4.8?±?4.1 μg/L or 4.5?±?3.9 μmol/mol creatinine) and Victoria (4.6?±?3.8 μg/L or 3.9?±?3.0 μmol/mol Cr) were significantly higher than levels found in Ventanilla (3.6?±?1.4 μg/L or 2.5?±?0.5 μmol/mol Cr). In conclusion, our data indicate high levels of exposure in children living in the communities studied in this work. The evidence found in this study could be further used as a trigger to revisit local policies on environmental exposures.