Meckel-Gruber syndrome: Prenatal diagnosis at 10 menstrual weeks using embryoscopy

A case of Meckel—Gruber syndrome was diagnosed by embryoscopy at 10 menstrual weeks, allowing for early termination of pregnancy. Post-mortem examination confirmed the presence of polydactyly and bilateral cystic lesions of the mesonephros and metanephros. Both the forming nephrons and the collecting ducts were involved in the formation of renal cysts.     

Dental microwear patterns of extant and extinct Muridae (Rodentia, Mammalia): ecological implications

Extant species of Muridae occupy a wide array of habitats and have diverse dietary habits. Consequently, their dental microwear patterns represent a potential clue to better understand the paleoecology of their extinct relatives, which are abundant in many Old World Neogene localities. In this study, dental microwear is investigated for specimens of 17 extant species of murine and deomyine rodents in order to test the reliability of this method and infer dietary preferences on the fossil species Saïdomys afarensis. This extinct form comes from a mid-Pliocene site (AL 327) located at the Hadar Formation (Ethiopia) known to have delivered many hominid specimens of Australopithecus afarensis. A significant correlation between microwear patterns and diet is detected. Thus, grass, fruit, and insect eaters display, respectively, high amounts of fine scratches, wide scratches, and large pits. Moreover, some aspects of the paleoecology of S. afarensis, including feeding habits, could be assessed in regard to its dental microwear pattern. Indeed, it probably had feeding habits similar to that of living grass eaters. These results concur with the presence of open to woodland areas covered by an herbaceous vegetal layer, including monocotyledons, in the vicinity of this mid-Pliocene locality.     

Queen control of egg fertilization in the honey bee

The study investigated the precision with which honey bee queens can control the fertilization of the eggs they lay. Because males and workers are reared in different-sized cells, the honey bee is one of the few Hymenoptera in which it is possible for the experimenter to know which type of egg a queen “intends” to lay. Eggs were collected from both worker and drone (male) cells from four honey bee colonies. Ploidy of the embryo was determined using polymorphic DNA microsatellites. All 169 eggs taken from worker cells were heterozygous at at least one microsatellite locus showing that the egg was fertilized. All 129 eggs taken from drone cells gave a single band at the B124 locus, strongly suggesting haploidy. These data show that honey bee queens have great, and quite possibly complete, ability to control the fertilization of the eggs they lay. Data from the literature suggest that in two species of parasitoid Hymenoptera (Copidosoma floridanum, Colpoclypeus florus) females have great, but not complete, ability to control fertilization. Received: 23 December 1997 / Accepted after revision: 17 May 1998     

Trade-offs and performances of a range of alternative global climate architectures for post-2012

Quantitative assessments help to highlight the main features of climate policies by better identifying their strengths and weaknesses. In this study, we develop a grading system for assessing thirteen proposals for post-2012 climate policy. We believe that these proposals contain appropriate policy instruments which will be considered for discussions about how to design the post-2012 climate agreement. Our grades are based on four criteria: environmental effectiveness, cost effectiveness, distributional considerations and institutional feasibility. We analyze the grades with two complementary methods: principal component and cluster analysis. Our results entail three policy implications. Firstly, the higher the number of policy instruments a proposal comprises, the more difficult might be its implementation. Secondly, proposals which include a meaningful effort by the U.S. tend to fail in environmental effectiveness and institutional feasibility. Thirdly, we identify that the “first best” and the “second best” approaches belong to a stable policy group, and both may be considered as suitable candidates for post-2012 climate policy.     

Improvement of electrical resistivity tomography for leachate injection monitoring

Leachate recirculation is a key process in the scope of operating municipal waste landfills as bioreactors, which aims to increase the moisture content to optimize the biodegradation in landfills. Given that liquid flows exhibit a complex behaviour in very heterogeneous porous media, in situ monitoring methods are required. Surface time-lapse electrical resistivity tomography (ERT) is usually proposed. Using numerical modelling with typical 2D and 3D injection plume patterns and 2D and 3D inversion codes, we show that wrong changes of resistivity can be calculated at depth if standard parameters are used for time-lapse ERT inversion. Major artefacts typically exhibit significant increases of resistivity (more than +30%) which can be misinterpreted as gas migration within the waste. In order to eliminate these artefacts, we tested an advanced time-lapse ERT procedure that includes (i) two advanced inversion tools and (ii) two alternative array geometries. The first advanced tool uses invariant regions in the model. The second advanced tool uses an inversion with a “minimum length” constraint. The alternative arrays focus on (i) a pole–dipole array (2D case), and (ii) a star array (3D case). The results show that these two advanced inversion tools and the two alternative arrays remove almost completely the artefacts within +/?5% both for 2D and 3D situations. As a field application, time-lapse ERT is applied using the star array during a 3D leachate injection in a non-hazardous municipal waste landfill. To evaluate the robustness of the two advanced tools, a synthetic model including both true decrease and increase of resistivity is built. The advanced time-lapse ERT procedure eliminates unwanted artefacts, while keeping a satisfactory image of true resistivity variations. This study demonstrates that significant and robust improvements can be obtained for time-lapse ERT monitoring of leachate recirculation in waste landfills.     

Towards an international standard: The ISO/DIS 18504 standard on sustainable remediation

Sustainable remediation is the elimination and/or control of unacceptable risks in a safe and timely manner while optimizing the environmental, social, and economic value of the work. Forthcoming International Organization for Standardization (ISO) Standard on Sustainable Remediation will allow countries without the capacity to develop their own guidance to benefit from work done over the past decade by various groups around the world. The ISO standard has progressed through the committee draft (ISO/CD 18504) and draft international standard (ISO/DIS 18504) stages. The risk‐based approach to managing the legacy of historically contaminated soil and groundwater has been incorporated into policy, legislation, and practice around the world. It helps determine the need for remediation and the end point of such remediation. Remediation begins with an options appraisal that short lists strategies that could deliver the required reduction in risk. A remediation strategy comprises one or more remediation technologies that will deliver the safe and timely elimination and/or control of unacceptable risks. The ISO standard will help assessors identify the most sustainable among the shortlisted, valid alternative remediation strategies. Practitioners presenting case studies claiming to constitute sustainable remediation should now report how they have aligned their work with the new standard. Indicators are used to compare alternative remediation strategies. The simplest metric that allows a characteristic to act as an indicator should be chosen. Weightings indicators can become a contested exercise and should only be undertaken where there is a clear desire for it by stakeholders and a clear need for it in identifying a preferred strategy. The simplest means of ranking alternative remediation strategies should be adopted.     

Review of LCA studies of solid waste management systems – Part I: Lessons learned and perspectives

The continuously increasing solid waste generation worldwide calls for management strategies that integrate concerns for environmental sustainability. By quantifying environmental impacts of systems, life cycle assessment (LCA) is a tool, which can contribute to answer that call. But how, where and to which extent has it been applied to solid waste management systems (SWMSs) until now, and which lessons can be learnt from the findings of these LCA applications? To address these questions, we performed a critical review of 222 published LCA studies of SWMS. We first analysed the geographic distribution and found that the published studies have primarily been concentrated in Europe with little application in developing countries. In terms of technological coverage, they have largely overlooked application of LCA to waste prevention activities and to relevant waste types apart from household waste, e.g. construction and demolition waste. Waste management practitioners are thus encouraged to abridge these gaps in future applications of LCA. In addition to this contextual analysis, we also evaluated the findings of selected studies of good quality and found that there is little agreement in the conclusions among them. The strong dependence of each SWMS on local conditions, such as waste composition or energy system, prevents a meaningful generalisation of the LCA results as we find it in the waste hierarchy. We therefore recommend stakeholders in solid waste management to regard LCA as a tool, which, by its ability of capturing the local specific conditions in the modelling of environmental impacts and benefits of a SWMS, allows identifying critical problems and proposing improvement options adapted to the local specificities.     

Recycling plant wax constituents for chemical defense: hemi-biosynthesis of triterpene saponins from β-amyrin in a leaf beetle

Several species of Doryphorina leaf beetles from Central- and South America produce oleanane triterpene glycosides in their defensive glands. The presence of pentacyclic triterpenes in insects is intriguing since they lack the key enzymes necessary to synthesize these compounds. Since -amyrin is a common constituent of leaf waxes, we hypothesized that these leaf beetles use this compound as a precursor to their oleanane glycosides. To test this hypothesis we first confirmed the presence of -amyrin in Ipomoea batatas, the food plant of Platyphora kollari. Next, adults of P. kollari were fed for 10 days with I. batatas leaf disks painted with a solution of [2,2,3-²H₃]-amyrin ([2,2,3-²H₃]-1). The secretion from their defensive glands was collected and analyzed by HPLC-ESIMS. The results demonstrated that the secretion of beetles fed with an amount of [2,2,3-²H₃]-amyrin corresponding to the quantity of unlabeled (natural) -amyrin present in the leaf disks contained on average 5.1% of [2,2,3-²H₃]-3-O--d-glucopyranosyl-(1-->4)--d-glucuronopyranosyl-hederagenin ([2,2,3-²H₃]-2), whereas the secretions of beetles fed with 10 times this amount of [2,2,3-²H₃]-amyrin contained on average 23.9% of [2,2,3-²H₃]-2. In both series of experiments, the percentage of labeled versus unlabeled triterpene glycoside in the secretion was positively correlated with the amount of deuterated -amyrin ingested. These results demonstrate for the first time that some leaf beetles are able to metabolize a widespread triterpenic constituent of leaf wax into more complex glycosides that are stored in their defensive glands.