Assessment of lead pollution in topsoils of a southern Italy area: Analysis of urban and peri-urban environment

Exposure to lead (Pb) may affect adversely human health. Mapping soil Pb contents is essential to obtain a quantitative estimate of potential risk of Pb contamination. The main aim of this paper was to determine the soil Pb concentrations in the urban and peri-urban area of Cosenza–Rende to map their spatial distribution and assess the probability that soil Pb concentration exceeds a critical threshold that might cause concern for human health. Samples were collected at 149 locations from residual and non-residual topsoil in gardens, parks, flower-beds, and agricultural fields. Fine earth fraction of soil samples was analyzed by X-ray Fluorescence spectrometry. Stochastic images generated by the sequential Gaussian simulation were jointly combined to calculate the probability of exceeding the critical threshold that could be used to delineate the potentially risky areas. Results showed areas in which Pb concentration values were higher to the Italian regulatory values. These polluted areas were quite large and likely, they could create a significant health risk for human beings and vegetation in the near future. The results demonstrated that the proposed approach can be used to study soil contamination to produce geochemical maps, and identify hot-spot areas for soil Pb concentration.     

Effects of hydromorphology and riparian vegetation on the sediment quality of agricultural low-order streams: consequences for stream restoration

Intensive agricultural land use imposes multiple pressures on streams. More specifically, the loading of streams with nutrient-enriched soil from surrounding crop fields may deteriorate the sediment quality. The current study aimed to find out whether stream restoration may be an effective tool to improve the sediment quality of agricultural headwater streams. We compared nine stream reaches representing different morphological types (forested meandering reaches vs. deforested channelized reaches) regarding sediment structure, sedimentary nutrient and organic matter concentrations, and benthic microbial respiration. Main differences among reach types were found in grain sizes. Meandering reaches featured larger mean grain sizes (50–70 μm) and a thicker oxygenated surface layer (8 cm) than channelized reaches (40 μm, 5 cm). Total phosphorous amounted for up to 1,500 μg?g^?1 DW at retentive channelized reaches and 850–1,050 μg?g^?1 DW at the others. While N-NH₄ accumulated in the sediments (60–180 μg?g^?1 DW), N-NO₃ concentrations were generally low (2–5 μg?g^?1 DW). Benthic respiration was high at all sites (10–20 g O₂ m^?2?day^?1). Our study shows that both hydromorphology and bank vegetation may influence the sediment quality of agricultural streams, though effects are often small and spatially restricted. To increase the efficiency of stream restoration in agricultural landscapes, nutrient and sediment delivery to stream channels need to be minimized by mitigating soil erosion in the catchment.     

Tradescantia micronucleus test indicates genotoxic potential of traffic emissions in European cities

Urban atmospheres contain complex mixtures of air pollutants including mutagenic and carcinogenic substances such as benzene, diesel soot, heavy metals and polycyclic aromatic hydrocarbons. In the frame of a European network for the assessment of air quality by the use of bioindicator plants, the Tradescantia micronucleus (Trad-MCN) test was applied to examine the genotoxicity of urban air pollution. Cuttings of Tradescantia clone #4430 were exposed to ambient air at 65 monitoring sites in 10 conurbations employing a standardised methodology. The tests revealed an elevated genotoxic potential mainly at those urban sites which were exposed to severe car traffic emissions. This bioassay proved to be a suitable tool to detect local 'hot spots' of mutagenic air pollution in urban areas. For its use in routine monitoring programmes, however, further standardisation of cultivation and exposure techniques is recommended in order to reduce the variability of results due to varying environmental conditions.     

Bringing together raptor collections in Europe for contaminant research and monitoring in relation to chemicals regulations

Raptors are good sentinels of environmental contamination and there is good capability for raptor biomonitoring in Europe. Raptor biomonitoring can benefit from natural history museums (NHMs), environmental specimen banks (ESBs) and other collections (e.g. specialist raptor specimen collections). Europe’s NHMs, ESBs and other collections hold large numbers of raptor specimens and samples, covering long periods of time. These collections are potentially a valuable resource for contaminant studies over time and space. There are strong needs to monitor contaminants in the environment to support EU and national chemical management. However, data on raptor specimens in NHMs, ESBs and other collections are dispersed, few are digitised, and they are thus not easy to access. Specimen coverage is patchy in terms of species, space and time. Contaminant research with raptors would be facilitated by creating a framework to link relevant collections, digitising all collections, developing a searchable meta-database covering all existing collections, making them more visible and accessible for contaminant research. This would also help identify gaps in coverage and stimulate specimen collection to fill gaps in support of prioritised contaminant monitoring. Collections can further support raptor biomonitoring by making samples available for analysis on request.     

Power generation with CO2 capture: Technology for CO2 purification

The goal of this paper is to find methodologies for removing a selection of impurities (H₂O, O₂, Ar, N₂, SO_x and NO_x) from CO₂ present in the flue gas of two oxy-combustion power plants fired with either natural gas (467 MW) or pulverized fuel (596 MW). The resulting purified stream, containing mainly CO₂, is assumed to be stored in an aquifer or utilized for enhanced oil recovery (EOR) purposes. Focus has been given to power cycle efficiency i.e.: work and heat requirements for the purification process, CO₂ purity and recovery factor (kg of CO₂ that is sent to storage per kg of CO₂ in the flue gas). Two different methodologies (here called Case I and Case II) for flue gas purification have been developed, both based on phase separation using simple flash units (Case I) or a distillation column (Case II). In both cases purified flue gas is liquefied and its pressure brought to 110 atm prior to storage.Case I: A simple flue gas separation takes place by means of two flash units integrated in the CO₂ compression process. Heat in the process is removed by evaporating the purified liquid CO₂ streams coming out from both flashes. Case I shows a good performance when dealing with flue gases with low concentration of impurities. CO₂ fraction after purification is over 96% with a CO₂ recovery factor of 96.2% for the NG-fired flue gas and 88.1% for the PF-fired flue gas. Impurities removal together with flue gas compression and liquefaction reduces power plant output of 4.8% for the NG-fired flue gas and 11.6% for the PF-fired flue gas. The total amount of work requirement per kg stored CO₂ is 453 kJ for the NG-fired flue gas and 586 kJ for the PF-fired flue gas.Case II: Impurities are removed from the flue gas in a distillation column. Two refrigeration loops (ethane and propane) have been used in order to partially liquefy the flue gas and for heat removal from a partial condenser. Case II can remove higher amounts of impurities than Case I. CO₂ purity prior to storage is over 99%; CO₂ recovery factor is somewhat lower than in Case I: 95.4% for the NG-fired flue gas and 86.9% for the PF-fired flue gas, reduction in the power plant output is similar to Case I.Due to the lower CO₂ recovery factor the total amount of work per kg stored CO₂ is somewhat higher for Case II: 457 kJ for the NG-fired flue gas and 603 kJ for the PF-fired flue gas.     

The influence of sampling protocol on nonmethane hydrocarbon mixing ratios

The effect of sampling protocol on ambient air hydrocarbon mixing ratios was examined on eight sampling days in Los Angeles during 2007 and 2008. Four protocols, which were based on previously published multi-city urban hydrocarbon studies in the United States, were compared and differences were quantified. Whole air canister samples were collected and analyzed for nonmethane hydrocarbons (NMHCs). Differing sampling protocols resulted in large differences in mixing ratios, up to an order of magnitude, for certain NMHCs on the same sampling day. However, the magnitude of the variability between NMHC levels obtained by the four protocols was not consistent throughout the eight sampling days. It was found that sampling time, followed by sampling location, had the greatest influence on the magnitude of the mixing ratio. Ratios between hydrocarbons, often used in urban studies to gain information on emission sources, also varied depending on the protocol used. Comparison of absolute NMHC mixing ratios collected in urban environments using differing sampling protocols should be made with care.     

Translocation of Sb and Ti in an undisturbed floodplain soil after application of Sb2O3 and TiO2 nanoparticles to the surface

The pore water transport of antimony and titanium, applied as nanoparticles (NPs), was studied by spiking stable suspensions of two different nanomaterials on the surface of an undisturbed floodplain soil. For preparation of stable dispersions, two different strategies were followed. (i) Comparable to those used in industrial applications: titanium dioxide nanoparticles, with an average diameter of 99 nm, were prepared by high-energy ball milling in water, whereas for (ii) antimony trioxide (Sb(2)O(3); average diameter 121 nm) a dispersing agent (sodium salt of poly[(naphthaleneformaldehyde)sulfonate] (pNFS) in water) was used. The upper 17 cm of a floodplain soil (river Rhine, Germany) was sampled using the minimally invasive sediment or fauna incubation experiment (SOFIE? two compartment cell; 3 l volume each), which preserved the pore system of the soil. The cells were equipped with 450 and 100 nm filter probes at different depths providing a non-invasive sampling of the pore water. The pore water was sampled at different times (T = 0, 24, 48, 96 and 196 h) and analysed by inductively coupled plasma quadrupole mass spectrometry (ICP-QMS). Sb and Ti were transported via the pore water of the floodplain soil to a depth of 14 cm, corresponding to the maximum cell depth. The highest Sb concentration in the pore water was detected after 24 h at a depth of 5.5-8 cm. Although the spiked concentration was higher for Ti than for Sb, the total Ti concentration in the pore water of the spiked cell was lower. This indicates a stronger agglomeration of TiO(2) NPs or a more intensive interaction of Ti with the solid matrix and a faster transport of Sb towards deeper soil layers. The results show that metal(loid)s from metal oxide NPs are transported in the soil pore water and, hence, have the potential to act as the source of contamination of deeper soil layers after soil surface contamination.     

Regulatory effects of dioxin-like and non-dioxin-like PCBs and other AhR ligands on the antioxidant enzymes paraoxonase 1/2/3

Paraoxonase 1 (PON1), an antioxidant enzyme, is believed to play a critical role in many diseases, including cancer. PCBs are widespread environmental contaminants known to induce oxidative stress and cancer and to produce changes in gene expression of various pro-oxidant and antioxidant enzymes. Thus, it appeared of interest to explore whether PCBs may modulate the activity and/or gene expression of PON1 as well. In this study, we compared the effects of dioxin-like and non-dioxin-like PCBs and of various aryl hydrocarbon receptor (AhR) ligands on PON1 regulation and activity in male and female Sprague-Dawley rats. Our results demonstrate that (i) the non-dioxin-like PCB154, PCB155, and PCB184 significantly reduced liver and serum PON1 activities, but only in male rats; (ii) the non-dioxin-like PCB153, the most abundant PCB in many matrices, did not affect PON1 messenger RNA (mRNA) level in the liver but significantly decreased serum PON1 activity in male rats; (iii) PCB126, an AhR ligand and dioxin-like PCB, increased both PON1 activities and gene expression; and (iv) even though three tested AhR ligands induced CYP1A in several tissues to a similar extent, they displayed differential effects on the three PONs and AhR, i.e., PCB126 was an efficacious inducer of PON1, PON2, PON3, and AhR in the liver, while 3-methylcholantrene induced liver AhR and lung PON3, and 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD), the most potent AhR agonist, increased only PON3 in the lung, at the doses and exposure times used in these studies. These results show that PCBs may have an effect on the antioxidant protection by paraoxonases in exposed populations and that regulation of gene expression through AhR is highly diverse.     

Towards a rational design of materials for the removal of environmentally relevant cations: polymer inclusion membranes (PIMs) and surface-modified PIMs for Sn2+ sequestration in aqueous solution

Environmental Science and Pollution Research - This work is focused on the design and preparation of polymer inclusion membranes (PIMs) for potential applications for stannous cation sequestration...     

Life cycle assessment of a domestic cooker hood

A life cycle assessment (LCA) of a domestic cooker hood was conducted. Cradle-to-grave analysis was performed using the GaBi software with Eco-Indicator 99 (Egalitarian Approach). The most polluting phases were “manufacturing” and “use”, the environmental impact being affected especially by production materials and the electricity consumed during the product’s lifespan. The study also highlighted that the hood’s environmental impact is closely related to the local power grid mix. This aspect was further analyzed by entering the data for operating it both in Italy and in France. Finally, the improvements obtained by replacing the single-phase electrical motor with an inverter-driven three-phase induction one and the halogen lamps with Light Emitting Diode (LED) lamps were assessed with the LCA. These changes entail an improvement of the environmental impact of 36% in Italy and of 24% in France.