Meckel-Gruber syndrome: Prenatal diagnosis at 10 menstrual weeks using embryoscopy

A case of Meckel—Gruber syndrome was diagnosed by embryoscopy at 10 menstrual weeks, allowing for early termination of pregnancy. Post-mortem examination confirmed the presence of polydactyly and bilateral cystic lesions of the mesonephros and metanephros. Both the forming nephrons and the collecting ducts were involved in the formation of renal cysts.     

CATCH:一种结构讨论方法,一件决策支持工具

引言 人类活动导致了水资源的过度开发和污染.<水框架指令>(WFD,2000/60/EG)就是为确保水资源的可持续利用、确保水资源的效果而拟定的.为达到WFD所概括的目标,一项明显的内容是:水资源的管理中要有各利益方的参与.把各利益方吸纳进来是一个重要步骤,可确保流域管理计划的发展考虑当地的经验,并且考虑这些计划对当地利益的影响.     

Immersion frying for the thermal drying of sewage sludge: an economic assessment

This paper presents an economic study of a novel thermal fry-drying technology which transforms sewage sludge and recycled cooking oil (RCO) into a solid fuel. The process is shown to have significant potential advantage in terms of capital costs (by factors of several times) and comparable operating costs. Three potential variants of the process have been simulated and costed in terms of both capital and operating requirements for a commercial scale of operation. The differences are in the energy recovery systems, which include a simple condensation of the evaporated water and two different heat pump configurations. Simple condensation provides the simplest process, but the energy efficiency gain of an open heat pump offset this, making it economically somewhat more attractive. In terms of operating costs, current sludge dryers are dominated by maintenance and energy requirements, while for fry-drying these are comparatively small. Fry-drying running costs are dominated by provision of makeup waste oil. Cost reduction could focus on cheaper waste oil, e.g. from grease trap waste.     

Zinc removal from synthetic waters using magnetite/graphene oxide composites

The removal of heavy metals from wastewater has become a global challenge, which demands the continuous study of efficient and low-cost treatment alternatives such as adsorption. In this research, the removal of zinc was evaluated using batch adsorption processes with nonconventional materials such as graphene oxide (GO), magnetite (MG), and their composites (GO:MG), formulated with three weight ratios (2:1, 1:1, and 1:2). Graphene was synthesized by the modified Marcano method, using pencil lead graphite as a precursor. MG and the composites were synthesized by chemical coprecipitation of ferrous sulfate and ferric chloride. The materials were characterized by Raman and Fourier transform infrared spectroscopies, scanning electron microscopy, X-ray diffraction, and the Brunauer–Emmett–Teller method to determine the functional groups, microstructural and morphological characteristics, and specific surface area. Batch adsorption tests were carried out to optimize the adsorbent dose and contact time with zinc solutions of 10 ppm. Zinc adsorption reached equilibrium at 2 h, with an optimal dose between 0.25 and 1.0 g/L. The maximum zinc removal efficiencies/adsorption capacities were 98.6%/165.6, 83.4%/47.6, 83.5%/21.9, 72.8%/19.9, and 82.2%/9.25 mg/g using GO, 2GO:1MG, 1GO:1MG, 1GO:2MG, and MG, respectively. Furthermore, the analysis of the isotherm and adsorption kinetics models determined that the adsorption processes using MG and the composites fit the Sips and pseudo-second-order models.     

Synthesis of functionalized mesoporous material from rice husk ash and its application in the removal of the polycyclic aromatic hydrocarbons

Environmental Science and Pollution Research - The rice husk ash (RHA) was used as an alternative source of silica for the synthesis of the functionalized mesoporous material, which was used in the...     

Vegetation response to hydrologic and geomorphic factors in an arid region of the Baja California Peninsula

Remotely sensed imageries were used to analyze the response of desert vegetation to physiographic factors and accumulated precipitation in drier and wetter years within a region of >16,500 km² sampled with 5,000 random pixels of 30 m. Vegetation development was indexed by the annual maximum values for greenness (SAVI) and canopy water content (NDII). Precipitation was interpolated from the 0.25° grid of the Tropical Rainfall Measurement Mission satellite-based estimates, showing a regional average of ～55 mm in the wetter year. The vegetation indices were only weakly related to total precipitation, often in a negative sense. Terrain factors that most often affected the vegetation indices, in multiple regression models, were Topographic Wetness Index, elevation, and slope gradient; these often had different signs for SAVI and for NDII. Models for NDII on intrusive igneous rocks gave better results than on extrusive igneous rocks. The strongest patterns in vegetation development were the contrast among Pacific coast, Cordillera, and Gulf coast subregions and the generally stronger results for NDII than SAVI.     

What factors determine trace metal contamination in Lake Tonga (Algeria)?

A study of trace metal (TM) contamination was conducted at Lake Tonga (Algeria), a site surrounded by several indirect contamination point sources such as an abandoned mine and steelworks. Studying two sampling sites over four seasons, we were able to depict the spatial and temporal variability of TM contamination in the lake. Among the seven TM examined (Pb, Cd, Fe, Zn, Ni, Cu, and Cr), only Fe, Pb, and Cd showed concentrations significantly higher than the site’s geological background. The contamination index (sediment concentration/background concentration) calculated for these three TM (Cd = 1.9?±?1.6, Fe = 6.8?±?1.8, and Pb = 3.3?±?2.6) clearly indicated anthropogenic contamination. Sediment TM contamination differed both between sampling sites and seasons despite environmental variables (e.g., oxygen and pH) being similar, thus suggesting different TM contamination sources. Fe contamination was high at the two sampling sites and over all studied seasons, possibly indicating general lake-scale Fe contamination, probably related to atmospheric deposition of steelworks emissions both on the lake and within the watershed. Lake tributaries were further suspected of channeling Fe contamination from the watershed into the lake. On the other hand, the sampling site close to the outlet was especially rich in Cd and Pb typically reflecting contamination by mine wastes. The indirect connection between the abandoned mine and the lake indicates that runoff of mine leachates through groundwater was likely a candidate in explaining the specificity of the TM contamination in this part of the lake. This study provides insights for management of TM contamination by addressing both spatial and temporal variability within the lake as well as differences in contamination sources.     

Characterization of indoor air quality and resident health in an Arizona senior housing apartment building

A survey of key indoor air quality (IAQ) parameters and resident health was carried out in 72 apartments within a single low-income senior housing building in Phoenix, Arizona. Air sampling was carried out simultaneously with a questionnaire on personal habits and general health of residents. Mean PM₁₀ concentrations are 66±16, 58±13, and 24±3 μg/m³ and mean PM_2.5 concentrations are 62±16, 53±13, and 20±2 μg/m³ for the living room, kitchen, and outdoor balcony, respectively. Median PM₁₀ concentrations are 17, 18 and 17 μg/m³ and median PM_2.5 concentrations are 13, 14, and 13 μg/m³, respectively. The initial results indicate that increased indoor particle concentrations coincide with residents who report smoking cigarettes. Indoor formaldehyde concentrations revealed median levels of 36.9, 38.8, and 4.3 ppb in the living room, kitchen, and balcony, respectively. Results show that 36% of living room samples and 44% of kitchen samples exceeded the Health Canada REL for chronic exposure to formaldehyde (40 ppb). Associations between occupants’ behavior, self-reported health conditions, and IAQ are evaluated.

Implications:This study provides a characterization of indoor air quality (IAQ) of subsidized apartments for seniors in Phoenix, Arizona. It is important for policy makers to understand the environments in which low-income seniors live, as they are vulnerable to the health impacts from poor IAQ. Formaldehyde concentrations were found to exceed the Health Canada 8-hr reference exposure level (REL) for up to 44% of indoor samples. Particulate matter exposure was governed by resident behavior (i.e., smoking). Associations between occupants’ behavior, IAQ, and self-reported health conditions are evaluated. This work can provide a foundation for subsequent remediation of IAQ conditions.     

A full-scale sequencing batch reactor system for swine wastewater treatment

A full-scale sequencing batch reactor (SBR) system was evaluated for its ability to remove carbon and nitrogen from swine wastewater. The SBR was operated on four, six-hour cycles each day, with each cycle consisting of 4.5 hours of “React,” 0.75 hours of “Settling”, 0.75 hours for “Draw” and “Fill.” Within each cycle, an amount of wastewater equivalent to about 5% of the reactor volume (5,500 litres) was removed and added. The SBR system was able to remove 82% of biochemical oxygen demand (BOD) and more than 75% of nitrogen. Even though the SBR effluent, with an average effluent BOD₅ of about 588 mg L^{? 1}, did not meet the discharge criteria, it enabled a reduction of the land base required for land application of swine wastewater by about 75%. Results indicated that the SBR system was a viable method for the treatment of swine wastewater.     

The Survival of Airborne Serratia marcescens in Urban Concentrations of Sulfur Dioxide

Aerosols of Serratia marcescens ATCC 274 were suspended in a 709L rotating drum at 20 ± 1 °C and high to mid-range relative humidities. At specified times after bacterial aerosolization, sulfur dioxide was added to concentrations of 2.5, or 5 mg/m³. Viable cell decay rate constants, in control aerosols without added sulfur dioxide, increased rapidly from near 100% to 60% RH in the first hour (termed: young aerosol) of suspension, and from a minimum rate constant at 80% in the succeeding four hours (termed: old aerosol).Upon addition of sulfur dioxide to a cloud of S. marcescens, generally, viable cell decay rate constants increased further. One exception was at 80% relative humidity where maximum resistance to SO₂ accelerated death was observed for old aerosols. Cells in young aerosols were particularly sensitive to SO₂ addition at mid-range humidities, while in older aerosols the cells were insensitive to up to 5 mg SO₂/m³ introduced at high RH; but were up to 10 times more sensitive than cells in young aerosols to a given increase (from 2.5 to 5 mg/m³) in SO₂ concentration at mid-range humidities.