A circular passive synthetic array: an inverse problem approach

Based on the general concept of the inverse acoustic radiation problem, the temporal scanning of a stationary acoustic field along a closed contour is used to simplify the measurement approach for obtaining information on source directionality. The mathematical formulation is derived from a model of the two-dimensional acoustic field. The formulation of the inverse problem is also investigated to establish a methodology for improving the angular resolution of the array processing. The fundamental relationship between the sound sources and the circular passive synthetic array is explored, utilizing existing mathematical methods, in order to develop the processing algorithm. Other subjects of practical interest, such as directional ambiguity, effect of Doppler frequency, interference noise, and processing gain are discussed. It is concluded that the results can be used to establish guidelines for engineering design and deployment of this type of synthetic array, and to further exploit the new array signal processing technique     

Effect of spatial variation characteristics on contouring of design storm depth

The ordinary kriging method, a geostatistical interpolation technique, was applied for developing contour maps of design storm depth in northern Taiwan using intensity–duration–frequency (IDF) data. Results of variogram modelling on design storm depths indicate that the design storms can be categorized into two distinct storm types: (i) storms of short duration and high spatial variation and (ii) storms of long duration and less spatial variation. For storms of the first category, the influence range of rainfall depth decreases when the recurrence interval increases, owing to the increasing degree of their spatial independence. However, for storms of the second category, the influence range of rainfall depth does not change significantly and has an average of approximately 72 km. For very extreme events, such as events of short duration and long recurrence interval, we do not recommend usage of the established design storm contours, because most of the interstation distances exceed the influence ranges. Our study concludes that the influence range of the design storm depth is dependent on the design duration and recurrence interval and is a key factor in developing design storm contours. Copyright © 2003 John Wiley & Sons, Ltd.     

Generalized strain probing of constitutive models

Advanced material constitutive models are used to describe complex soil behaviour. These models are often used in the solution of boundary value problems under general loading conditions. Users and developers of constitutive models need to methodically investigate the represented soil response under a wide range of loading conditions. This paper presents a systematic procedure for probing constitutive models. A general incremental strain probe, 6D hyperspherical strain probe (HSP), is introduced to examine rate‐independent model response under all possible strain loading conditions. Two special cases of HSP, the true triaxial strain probe (TTSP) and the plane‐strain strain probe (PSSP), are used to generate 3‐D objects that represent model stress response to probing. The TTSP, PSSP and general HSP procedures are demonstrated using elasto‐plastic models. The objects resulting from the probing procedure readily highlight important model characteristics including anisotropy, yielding, hardening, softening and failure. The PSSP procedure is applied to a Neural Network (NN) based constitutive model. It shows that this probing is especially useful in understanding NN constitutive models, which do not contain explicit functions for yield surface, hardening, or anisotropy. Copyright © 2004 John Wiley & Sons, Ltd.     

On the microwave millisecond spike emission and its associated phenomena during the impulsive phase of large solar flare

We propose a model of two acceleration regions, which can explain, on the basis of microwave maser caused by a “hollow-beam” distribution of electrons, the presence of millisecond spikes in the event of 1981 May 16 and their absence in the event of 1981 October 12, and the enhanced continuous emission in the latter. We have also uncovered relations among the features, e.g. the Type III_G, Type IV_DCIM and hard x-ray bursts, that accompany the microwave millisecond spikes during the impulsive phase of a large flare.     

渤海、黄海、东海水温垂直结构统计特征分析

渤海、黄海与东海的水温垂直结构呈现陆架浅海特有的水文特征，其分布与变化甚为复杂。几十年来，虽然中外海洋学家曾对这些海区水文要素的分布及其变异作过大量研究，但是，关于水温垂直结构各特征值较系统的分析研究则始于六十年代初期，毛汉礼等根据一年观测资料(1958-1959)作了较全面的阐述。但是这些资料多数是用颠倒温度表观测，少数为深度温度计(BT)观测；并且研究海区限千124°E以西。本文试图分析研究近年来渤海、黄海与东海水温垂直结构各特征值的统计特性；研究海区有了较大的扩展：黄海至124°30''E；东海至127°E。 文中引用国家海洋局1975一1980年间BT观测资料，共计166个观测站，累积约七千余个BT片资料。     

南海波高熵和风速熵

根据风速的统计分布，给出了有因次风速熵和无因次风速熵的定义及其计算方法，使用ＧＥＯＳＡＴ高度计１９８６年１１月－１９８９年２月的有效波高和风速的资料，计算，分析了南海海域上的波高熵，风速熵，给出它们的时间变化特征和空间变化特征，并对不同随机量的无因次熵，即随机度进行了比较。     

The evolution of the coral reefs in the middle and north parts of the South China Sea and its relation with tectonic and eustatic movements

In this paper, the morphogenesis, stratigraphic sequences and dates of the coral reefs in the middle and north parts of the South China Sea are discussed, the position of the distributary regions of Cenozoic coral reefs in plate tectonics, the relationships of coral-reef evolutionary characteristics and dates with sea-basin spreading. Neogene sea-water transgression and Quaternary global climate-eustatic fluctuation are expounded and proved, and the latitudinal variation of the distribution of coral reefs in various geologic times are summed up.     

北黄海长山群岛海域沉积环境初步研究

本文在获取１９８９－１９９３年黄海北部长山群岛海域沉积物大量数据基础上，借助沉积物粒度分析（Ｑ型），揭示出该海域具有在“岛屿效应”影响下的４种环境能量类型，分析了与其适应的环岛沉积环境及其分布特征。     

Origin of a large breccia-vein system in the Sanerlin uranium deposit, southern China: a reinterpretation

The early Tertiary Sanerlin uranium deposit is located near the southwestern margin of the Chaling-Yongxing pull-apart basin defined by the Chaling-Yongxing and Chenxian-Linwu sinistral strike-slip faults in southern China. The uranium ores are hosted in 15 breccia-vein bodies, which are separately located in the cores of three secondary anticlines of the Upper Permian Dangchong Formation. Individual breccia-vein bodies are composed of fragments of silicified shale and sandstone from the Dangchong Formation, and quartz veinlets as cements. These fragments, together with quartz veins, form a mosaic texture. Hydrothermal pitchblende is the only commercial uranium mineral, mainly occurring as disseminated grains within quartz veins or coating fragments. Other metallic minerals include molybdenite, pyrite, chalcopyrite, galena, sphalerite, and red microcrystalline hematite. Fluid inclusions in quartz veins have homogenization temperatures ranging from 150 to 280 °C, and calculated salinity values between 5.6 and 13.4 wt% NaCl equivalent. Stable isotope analyses show that the mineralizing fluid was characterized by '¹⁸O values of -2.2 to +2.6‰ and 'D_H2O values of -134 to -110‰. These analytical data demonstrate that hydrothermal fluids were mainly derived from formation waters (brines) of the Chaling-Yongxing basin. Fluid overpressuring was caused by an abnormal geothermal gradient and impermeable shales in the deposit area. The geometry, texture, and structure of the breccia-vein system, along with the fluid pressure estimates, suggest that hydraulic fracturing generated the mineralized breccia-vein system. Pitchblende and associated minerals were deposited when gaseous phases were released abruptly from the ore fluids due to the hydraulic fracturing.