Mechanisms of riverbank failure along the Arno River,central Italy

Riverbanks along the Arno River have been investigated with the aims of de?ning the main mechanisms of failure and retreat, their spatial distribution, and their causes. Geomorphological aspects were investigated by a reconnaissance of riverbank processes, for a number (26) of representative sites. Laboratory and in situ tests were then performed on a selected number of riverbanks (15). Based on the material characteristics, six main typologies of riverbanks have been de?ned, with homogeneous ?ne‐grained and composite banks representing the most frequent types. Slab‐type failures are the most frequent mechanism observed on ?ne‐grained banks, while cantilever failures prevail on composite banks. The role of river stage and related pore water pressure distributions in triggering the main observed mechanisms of failure has been investigated using two different types of stability analysis. The ?rst was conducted for 15 riverbanks, using the limit equilibrium method and considering simpli?ed hypotheses for pore water pressure distribution (annulment of negative pore pressures in the portion of the bank between low water stage and peak stage). Stability conditions and predicted mechanisms of failure are shown to be in reasonably good agreement with ?eld observations. Three riverbanks, representative of the main alluvial reaches of the river, were then selected for a more detailed bank stability analysis, consisting of: (a) de?nition of characteristic hydrographs of the reach with different return periods; (b) modelling of saturated and unsaturated ?ow using ?nite element seepage analysis; and (c) stability analysis with the limit equilibrium method, by adopting pore water pressure values derived from the seepage analysis. The results are compared to those obtained from the previous simpli?ed analysis, and are used to investigate the different responses, in terms of stability, to different hydrological and riverbank conditions. Copyright © 2003 John Wiley & Sons, Ltd.     

Turbulent Transfer Between Street Canyons and the Overlying Atmospheric Boundary Layer

The turbulent exchange of momentum between a two-dimensional cavity and the overlying boundary layer has been studied experimentally, using hot-wire anemometry and particle image velocimetry (PIV). Conditions within the boundary layer were varied by changing the width of the canyons upstream of the test canyon, whilst maintaining the square geometry of the test canyon. The results show that turbulent transfer is due to the coupling between the instabilities generated in the shear layer above the canyons and the turbulent structures in the oncoming boundary layer. As a result, there is no single, unique velocity scale that correctly characterizes all the processes involved in the turbulent exchange of momentum across the boundary layer. Similarly, there is no single velocity scale that can characterize the different properties of the turbulent flow within the canyon, which depends strongly on the way in which turbulence from the outer flow is entrained into the cavity and carried round by the mean flow. The results from this study will be useful in developing simple parametrizations for momentum exchange in the urban canopy, in situations where the street geometry consists principally of relatively long, uniform streets arranged in grid-like patterns; they are unlikely to be applicable to sparse geometries composed of isolated three-dimensional obstacles.     

Effects of tilling methods on soil penetration resistance,organic carbon and water stable aggregates in a vineyard of semiarid Mediterranean environment

Tillage, especially in semiarid Mediterranean environment, enhances the mineralization process of soil organic matter (SOM) and, in turn, decreases aggregate stability. Furthermore, continuous tillage leads to the formation of plough pan beneath the tilled layer. In the present study, we investigated the effect of an innovative self-propelled machine (spading machine, SM) for shallow tillage on SOM, water stable aggregates (WSA) and soil penetration resistance (PR). Such effects were compared to those of chisel plough (CP), rotary tiller (RT) and no tillage (NT). Each tilling method was applied up to a depth of 15 cm, whereas in NT only a brush cutter was used for weed control. Soil analyses were performed at the start of the experiment (March 2009, T0), in April 2010 (T1), May 2012 (T3), and June 2014 (T5) at both 0–15 and 15–30 cm. Compared to T0, soil PR increased with time in all the treatments and generally followed the order SM?<?RT?<?CP?<?NT. In soil tilled with the SM, soil PR never exceeded 2.5 MPa that was demonstrated to be a critical value for root elongation, and no evidence of the formation of plough pan beneath the tilled layer was observed. SOC as well as water content and WSA were higher in SM compared with CP and RT. In conclusion, the spading machine was proved to be more efficient in lowering the soil PR and in avoiding the formation of the plough pan. Furthermore, SM increased SOC and WSA.     

Interannual-to-decadal variability of the North Atlantic from an ocean data assimilation system

An ocean analysis, assimilating both surface and subsurface hydrographic temperature data into a global ocean model, has been produced for the period 1958–2000, and used to study the time and space variations of North Atlantic upper ocean heat content (HC). Observational evidence is presented for interannual-to-decadal variability of upper ocean thermal fluctuations in the North Atlantic related to the North Atlantic Oscillation (NAO) variability over the last 40 years. The assimilation scheme used in the ocean analysis is a univariate, variational optimum interpolation of temperature. The first guess is produced by an eddy permitting global ocean general circulation forced by atmospheric reanalysis from the National Center for Environmental Prediction (NCEP). The validation of the ocean analysis has been done through the comparison with objectively analyzed observations and independent data sets. The method is able to compensate for the model systematic error to reproduce a realistic vertical thermal structure of the region and to improve consistently the model estimation of the time variability of the upper ocean temperature. Empirical orthogonal function (EOF) analysis shows that an important mode of variability of the wintertime upper ocean climate over the North Atlantic during the period of study is characterized by a tripole pattern both for SST and upper ocean HC. A similar mode is found for summer HC anomalies but not for summer SST. Over the whole period, HC variations in the subtropics show a general warming trend while the tropical and north eastern part of the basin have an opposite cooling tendency. Superimposed on this linear trend, the HC variability explained by the first EOF both in winter and summer conditions reveals quasi-decadal oscillations correlated with changes in the NAO index. On the other hand, there is no evidence of correlation in time between the NAO index and the upper ocean HC averaged over the whole North Atlantic which exhibits a substantial and monotonic warming trend during the last two decades of the analysis period. The maximum correlation is found between the leading principal component of winter HC anomalies and NAO index at 1 year lag with NAO leading. For SST anomalies significant correlation is found only for winter conditions. In contrast, for HC anomalies high correlations are found also in the summer suggesting that the summer HC keeps a memory of winter conditions.     

人为因素导致的地面沉降

天然气、石油、地下水、地热热水和卤水等流体运移出地下储存地层时,地层耗尽了流体而产生压缩变形,这些变形传递到地表表面就形成了人为的地面沉降。在本文中:(1)列举了世界上主要的地面沉降区域;(2)论述了引发地面沉降的力学机制,这些可以量测的地面沉降发生在地下含水层体系、天然气气田和石油油田之上;(3)描述了目前可以用于地面沉降测量和岩石变形原位测试的技术手段;(4)简要介绍了几个地面沉降预测的数值模型;(5)说明了用于控制地面沉降发展和减轻相关环境影响的几种防治措施。     

Geochemical and O-isotope constraints on the evolution of lithospheric mantle in the Ross Sea rift area (Antarctica)

Peridotite xenoliths found in Cenozoic alkali basalts of northern Victoria Land, Antarctica, vary from fertile spinel-lherzolite to harzburgite. They often contain glass-bearing pockets formed after primary pyroxenes and spinel. Few samples are composite and consist of depleted spinel lherzolite crosscut by amphibole veins and/or lherzolite in contact with poikilitic wehrlite. Peridotite xenoliths are characterized by negative Al₂O₃–Mg# and TiO₂–Mg# covariations of clino- and orthopyroxenes, low to intermediate HREE concentrations in clinopyroxene, negative Cr–Al trend in spinel, suggesting variable degrees of partial melting. Metasomatic overprint is evidenced by trace element enrichment in clinopyroxene and sporadic increase of Ti–Fe_tot. Preferential Nb, Zr, Sr enrichments in clinopyroxene associated with high Ti–Fe_tot contents constrain the metasomatic agent to be an alkaline basic melt. In composite xenoliths, clinopyroxene REE contents increase next to the veins suggesting metasomatic diffusion of incompatible element. Oxygen isotope data indicate disequilibrium conditions among clinopyroxene, olivine and orthopyroxene. The highest δ¹⁸O values are observed in minerals of the amphibole-bearing xenolith. The δ¹⁸O_cpx correlations with clinopyroxene modal abundance and geochemical parameters (e.g. Mg# and Cr#) suggest a possible influence of partial melting on oxygen isotope composition. Thermobarometric estimates define a geotherm of 80°C/GPa for the refractory lithosphere of NVL, in a pressure range between 1 and 2.5 GPa. Clinopyroxene microlites of melt pockets provide P–T data close to the anhydrous peridotite solidus and confirm that they originated from heating and decompression during transport in the host magma. All these geothermometric data constrain the mantle potential temperature to values of 1250–1350°C, consistent with the occurrence of mantle decompressional melting in a transtensive tectonic regime for the Ross Sea region.     

The Holocene Secche di Lazzaro phreatomagmatic succession (Stromboli,Italy): evidence of pyroclastic density current origin deduced by facies analysis and AMS flow directions

The edifice of Stromboli volcano gravitationally collapsed several times during its volcanic history (>100 ka–present). The largest Holocene event occurred during the final stage of the Neostromboli activity (∼13–5 ka), and was accompanied by the emplacement of phreatomagmatic and lahar deposits, known as the Secche di Lazzaro succession. A stratigraphic and paleomagnetic study of the Secche di Lazzaro deposits allows the interpretation of the emplacement and the eruptive processes. We identify three main units within the succession that correspond to changing eruption conditions. The lower unit (UA) consists of accretionary lapilli-rich, thinly bedded, parallel- to cross-stratified ash deposits, interpreted to indicate the early stages of the eruption and emplacement of dilute pyroclastic density currents. Upward, the second unit (UB) of the deposit is more massive and the beds thicker, indicating an increase in the sedimentation rate from pyroclastic density currents. The upper unit (UC) caps the succession with thick, immediately post-eruptive lahars, which reworked ash deposited on the volcano’s slope. Flow directions obtained by Anisotropy of Magnetic Susceptibility (AMS) analysis of the basal bed of UA at the type locality suggest a provenance of pyroclastic currents from the sea. This is interpreted to be related to the initial base-surges associated with water–magma interaction that occurred immediately after the lateral collapse, which wrapped around the shoulder of the sector collapse scar. Upward in the stratigraphy (upper beds of UA and UB) paleoflow directions change and show a provenance from the summit vent, probably related to the multiple collapses of a vertical, pulsatory eruptive column.     

Dissolution/crystallization kinetics recorded in the 2002–2003 lavas of Stromboli (Italy)

On 28 December 2002, new vents opened on the flanks of Stromboli, just below the summit craters, interrupting the persistent activity of the volcano with a 7-month-long effusive eruption. We here report on the plagioclase size distribution (PlgSD) in lava samples collected following the chronology of the 2002–2003 eruption. Data reveal a linear PlgSD similar to that found in samples of normal Stromboli activity, indicating that the switch from Strombolian explosive to effusive activity is not associated with changes in texture. Nevertheless, the crystal size distribution slopes and intercepts exhibit slight sinusoidal temporal variations that are here ascribed to a magma supply mechanism able to induce “resonance” in the crystal size distribution, with an amplitude that depends on the supply rate.     

Robust numerical implementation of a 3D rate-dependent model for reservoir geomechanical simulations

A 3D elasto-plastic rate-dependent model for rock mechanics is formulated and implemented into a Finite Element (FE) numerical code. The model is based on the approach proposed by Vermeer and Neher (A soft soil model that accounts for creep. In: Proceedings of the International Symposium “Beyond 2000 in Computational Geotechnics,” pages 249-261, 1999). An original strain-driven algorithm with an Inexact Newton iterative scheme is used to compute the state variables for a given strain increment.The model is validated against laboratory measurements, checked on a simplified test case, and used to simulate land subsidence due to groundwater and hydrocarbon production. The numerical results prove computationally effective and robust, thus allowing for the use of the model on real complex geological settings.     

Do We Really Need Mantle Components to Define Mantle Composition?

We discuss the concept of components in the Earth's mantle startingfrom a petrological and geochemical approach, but adopting anew method of projection of geochemical and isotopic data. Thisallows the compositional variability of magmatic associationsto be evaluated in multi-dimensional space, thus simultaneouslyaccounting for a large number of compositional variables. Wedemonstrate that ocean island basalts (OIB) and mid-ocean ridgebasalts (MORB) are derived from a marble-cake mantle, in whichdifferent degrees of partial melting of recycled lithosphere,which are heterogeneous in age and composition, contribute tothe magma genesis. This view is supported by the variabilityin the geochemical and isotopic signatures of OIB that are observedon the scale of a single ocean island as well as on that ofan ocean, mostly varying between two extreme compositions, thatare not strictly related to the commonly accepted mantle components(DMM, EMI, EMII, HIMU). Rather they are a distinctive featureof the mantle source sampled at each ocean island and are stronglydependent on the Pb isotope system. We recommend a change inperspective in studies of MORB–OIB geochemistry from onebased on physically distinct mantle components to a model basedon the existence of a marble-cake-like upper mantle. Althoughresembling the statistical upper mantle, this model impliesthat geochemical homogenization can be attained only withinthe limits of local mantle composition, so that a world-wideuniform depleted reservoir cannot be sampled by simply extendingthe volume of the region undergoing partial melting. KEY WORDS: geochemistry; isotope; mantle; OIB