Recovery of thermohaline circulation under CO2 stabilization and overshoot scenarios

In this study we examine the behavior of the thermohaline circulation, as simulated by the Community Climate System Model version 3 (CCSM3), for several centuries following CO₂ stabilization for the SRES B1 and A1B scenarios and for an “overshoot” scenario in which CO₂ levels temporarily reach the same level as in the A1B scenario before declining to an ultimate stabilization level that is identical to the B1 case. While we find no evidence for irreversible changes of the thermohaline circulation in the overshoot experiment, the interplay of the different timescales of the temperature response of the surface and interior ocean does lead to a number of differences in the long-term response of the ocean between it and the B1 stabilization scenario where the same GHG levels are approached by different paths. The stronger initial warming and its slow penetration into the deeper ocean, followed by a transient surface cooling in the overshoot scenario leads to lower static stability, deeper mixing, and a more rapid recovery of the thermohaline circulation than in the B1 stabilization scenario. While the overshoot scenario recovers surface conditions (e.g. SST, sea ice extent) very similar to the B1 scenario shortly after reaching the same GHG levels, the additional accumulation of heat in the interior ocean during the period of higher forcing causes the global mean ocean temperature and steric sea level to remain higher than in the B1 stabilization scenario for at least another several centuries.     

Tectonic evolution of the ultrahigh-pressure (UHP) and high-pressure (HP) metamorphic belts from central China

Abstract In the Triassic suture between the Sino-Korean and Yangtze cratons, the Dabie metamorphic Complex in central China includes three tectonic units: the northern Dabie migmatitic terrane, the central ultrahigh-P coesite- and diamond-bearing eclogite belt, and the southern high-P blueschist-eclogite belt. This complex is bounded to the north by a north-dipping normal fault with a Paleozoic accretionary complex and to the south by a north-dipping reverse fault with Yangtze basement plus its foreland fold-and-thrust sequence. Great differences in metamorphic pressure suggests that these units reached different depths during metamorphism and their juxtaposition occurred by wedge extrusion of subducted old continental fragments. These units were subsequently subjected to (i) Barrovian type regional metamorphism and deformation at shallow depths; (ii) intrusion of Cretaceous granitic plutons; and (iii) doming and segmentation into several blocks by normal and strike-slip faults. A new speculative model of tectonic exhumation of UHP rocks is proposed.     

http://dx.doi.org/10.1016/j.gsf.2016.09.005

We propose the nuclear geyser model to elucidate an optimal site to bear the first life.Our model overcomes the difficulties that previously proposed models have encountered.Nuclear geyser is a geyser driven by a natural nuclear reactor,which was likely common in the Hadean Earth,because of a much higher abundance of ~(235)U as nuclear fuel.The nuclear geyser supplies the following:(1)high-density ionizing radiation to promote chemical chain reactions that even tar can be used for intermediate material to restart chemical reactions,(2)a system to maintain the circulation of material and energy,which includes cyclic environmental conditions(warm/cool,dry/wet,etc.)to enable to produce complex organic compounds,(3)a lower temperature than 100℃ as not to break down macromolecular organic compounds,(4)a locally reductive environment depending on rock types exposed along the geyser wall,and(5)a container to confine and accumulate volatile chemicals.These five factors are the necessary conditions that the birth place of life must satisfy.Only the nuclear geyser can meet all five,in contrast to the previously proposed birth sites,such as tidal flat,submarine hydrothermal vent,and outer space.The nuclear reactor and associated geyser,which maintain the circulations of material and energy with its surrounding environment,are regarded as the nuclear geyser system that enables numerous kinds of chemical reactions to synthesize complex organic compounds,and where the most primitive metabolism could be generated.     

Determination of Sr/Sr mass-dependent isotopic fractionation and radiogenic isotope variation of Sr/Sr in the Neoproterozoic Doushantuo Formation

We measured both mass-dependent isotope fractionation of δ⁸⁸Sr (⁸⁸Sr/⁸⁶Sr) and radiogenic isotopic variation of Sr (⁸⁷Sr/⁸⁶Sr) for the Neoproterozoic Doushantuo Formation that deposited as a cap carbonate immediately above the Marinoan-related Nantuo Tillite. The δ⁸⁸Sr and ⁸⁷Sr/⁸⁶Sr compositions showed three remarkable characteristics: (1) high radiogenic ⁸⁷Sr/⁸⁶Sr values and gradual decrease in the ⁸⁷Sr/⁸⁶Sr ratios, (2) anomalously low δ⁸⁸Sr values at the lower part cap carbonate, and (3) a clear correlation between ⁸⁷Sr/⁸⁶Sr and δ⁸⁸Sr values. These isotopic signatures can be explained by assuming an extreme greenhouse condition after the Marinoan glaciation. Surface seawater, mixed with a large amount of freshwater from continental crusts with high ⁸⁷Sr/⁸⁶Sr and lighter δ⁸⁸Sr ratios, was formed during the extreme global warming after the glacial event. High atmospheric CO₂ content caused sudden precipitation of cap carbonate from the surface seawater with high ⁸⁷Sr/⁸⁶Sr and lighter δ⁸⁸Sr ratios. Subsequently, the mixing of the underlying seawater, with unradiogenic Sr isotope compositions and normal δ⁸⁸Sr ratios, probably caused gradual decrease of the ⁸⁷Sr/⁸⁶Sr ratios of the seawater and deposition of carbonate with normal δ⁸⁸Sr ratios. The combination of ⁸⁷Sr/⁸⁶Sr and δ⁸⁸Sr isotope systematics gives us new insights on the surface evolution after the Snowball Earth.     

High-reliability zircon separation for hunting the oldest material on Earth: An automatic zircon separator with image-processing/microtweezers-manipulating system and double-step dating

Despite the recent development in radiometric dating of numerous zircons by LA-ICPMS, mineral separation still remains a major obstacle, particularly in the search for the oldest material on Earth. To improve the efficiency in zircon separation by an order of magnitude, we have designed/developed a new machine-an automatic zircon separator(AZS). This is designed particularly for automatic pick-up of100 μm-sized zircon grains out of a heavy mineral fraction after conventional separation procedures. The AZS operates in three modes:(1) image processing to choose targeted individual zircon grains out of all heavy minerals spread on a tray,(2) automatic capturing of the individual zircon grains with microtweezers, and(3) placing them one-by-one in a coordinated alignment on a receiving tray. The automatic capturing was designed/created for continuous mineral selecting without human presence for many hours. This software also enables the registration of each separated zircon grain for dating, by recording digital photo-image, optical(color) indices, and coordinates on a receiving tray. We developed two new approaches for the dating; i.e.(1) direct dating of zircons selected by LA-ICPMS without conventional resin-mounting/polishing,(2) high speed U-Pb dating, combined with conventional sample preparation procedures using the new equipment with multiple-ion counting detectors(LA-MIC-ICPMS).With the first approach, Pb-Pb ages obtained from the surface of a mineral were crosschecked with the interior of the same grain after resin-mounting/polishing. With the second approach, the amount of time required for dating one zircon grain is ca. 20 s, and a sample throughput of 150 grains per hour can be achieved with sufficient precision(ca. 0.5%).We tested the practical efficiency of the AZS, by analyzing an Archean Jack Hills conglomerate in Western Australia with the known oldest(4.3 Ga) zircon on Earth. Preliminary results are positive; we were able to obtain more than 194 zircons that are over 4.0 Ga out of ca. 3800 checked grains, and 9 grains were over 4300 Ma with the oldest at 4371 ± 7 Ma. This separation system by AZS, combined with the new approaches, guarantees much higher yield in the hunt for old zircons.     

On-going orogeny in the outer-arc of the Timor–Tanimbar region, eastern Indonesia

The Timor–Tanimbar islands of eastern Indonesia form a non-volcanic arc in front of a 7 km deep fore-arc basin that separates it from a volcanic inner arc. The Timor–Tanimbar Islands expose one of the youngest high P/T metamorphic belts in the world, providing us with an excellent opportunity to study the inception of orogenic processes, undisturbed by later tectonic events.Structural and petrological studies of the high P/T metamorphic belt show that both deformation and metamorphic grade increase towards the centre of the 1 km thick crystalline belt. Kinematic indicators exhibit top-to-the-north sense of shear along the subhorizontal upper boundaries and top-to-the-south sense in the bottom boundaries of the high P/T metamorphic belt. Overall configuration suggests that the high P/T metamorphic rocks extruded as a thin sheet into a space between overlying ophiolites and underlying continental shelf sediments. Petrological study further illustrates that the central crystalline unit underwent a Barrovian-type overprint of the original high P/T metamorphic assemblages during wedge extrusion, and the metamorphic grade ranged from pumpellyite-actinolite to upper amphibolite facies.Quaternary uplift, marked by elevation of recent reefs, was estimated to be about 1260 m in Timor in the west and decreases toward Tanimbar in the east. In contrast, radiometric ages for the high P/T metamorphic rocks suggest that the exhumation of the high P/T metamorphic belt started in western Timor in Late Miocene time and migrated toward the east. Thus, the tectonic evolution of this region is diachronous and youngs to the east. We conclude that the deep-seated high P/T metamorphic belt extrudes into shallow crustal levels as a first step, followed by doming at a later stage. The so-called ‘mountain building’ process is restricted to the second stage. We attribute this Quaternary rapid uplift to rebound of the subducting Australian continental crust beneath Timor after it achieved positive buoyancy, due to break-off of the oceanic slab fringing the continental crust. In contrast, Tanimbar in the east has not yet been affected by later doming. A wide spectrum of processes, starting from extrusion of the high P/T metamorphic rocks and ending with the later doming due to slab break-off, can be observed in the Timor–Tanimbar region.     

Radiative Heat Transfer and Hydrostatic Stability in Nocturnal Fog

We have performed a one-dimensional and transient radiative heat transfer analysis in order to investigate interaction between atmospheric radiation and convective instability within a nocturnal fog. The radiation element method using the Ray Emission Model (REM²), which is a generalized numerical method, in conjunction with a line-by-line (LBL) method, is employed to attain high spectral resolution calculations for anisotropically scattering fog. The results show that the convective instability has a strong dependence on radiative properties of the fog. For the condition of a 20-m droplet diameter and liquid water content of 0.1 × 10^–3 kg m^–3;, the temperature profile within the fog becomes S shaped, and a convective instability layer forms in the middle or lower level of the fog. However, for the same water content and a 40-m diameter droplet, no strong convective instability layer forms, whereas for a 10-m diameter droplet a strong convective instability is observed.     

http://www.sciencedirect.com/science/article/pii/S1674987114000917

Important ecological changes of the Earth(oxidization of the atmosphere and the ocean) increase in nutrient supply due to the break-up of the super continent(Rodinia) and the appearance of multi-cellular organisms(macroscopic algae and metazoan) took place in the Ediacaran period,priming the Cambrian explosion.The strong perturbations in carbon cycles in the ocean are recorded as excursions in carbonate and organic carbon isotope ratio(δ~(13)C_(carb) and δ~(13)C_(org)) from the Ediacaran through early Cambrian periods.The Ediacaran-early Cambrian sediment records of δ~(13)C_(carb) and δ~(13)C_(org),obtained from the drill-core samples in Three Gorges in South China,are compared with the results of numerical simulation of a simple one-zone model of the carbon cycle of the ocean,which has two reservoirs(i.e.,dissolved organic carbon(DOC) and dissolved inorganic carbon(DIC).The fluxes from the reservoirs are assumed to be proportional to the mass of the carbon reservoirs.We constructed a model,referred to here as the Best Fit Model(BFM),which reproduce δ~(13)C_(carb) and δ~(13)C_(org) records in the Ediacaran-early Cambrian period noted above.BFM reveals that the Shuram excursion is related to three major changes in the carbon cycle or the global ecological system of the Earth:(1) an increase in the coefficient of remineralization by a factor of ca.100,possibly corresponding to a change in the dominant metabolism from anaerobic respiration to aerobic respiration,(2) an increase of carbon fractionation index from 25‰ to 33‰,possibly corresponding to the change in the primary producer from rock-living cyanobacteria to free-living macro algae,and(3) an increase in the coefficient of the organic carbon burial by a factor of ca.100,possibly corresponding to the onset of a biological pump driven by the flourishing metazoan and zooplankton.The former two changes took place at the start of the Shuram excursion,while the third occurred at the end of the Shuram excursion.The other two excursions are explained by the tentative decrease in primary production due to cold periods,which correspond to the Gaskiers(ca.580 Ma) and Bikonor(ca.542 Ma) glaciations.     

Prograde pressure–temperature records from inclusions in zircons from ultrahigh-pressure–high-pressure rocks of the Kokchetav Massif, northern Kazakhstan

Abstract In the first extensive, systematic study of inclusions in zircons from ultrahigh-pressure (UHP) and high-pressure (HP) metamorphic rocks of the Kokchetav Massif of Kazakhstan (separated from 232 rock samples from all representative lithologies and geographic regions), we identified graphite, quartz, garnet, phengite, phlogopite, rutile, albite, K-feldspar, amphibole, zoisite, kyanite, calcite, dolomite, apatite, monazite, omphacite and jadeite, as well as the diagnostic UHP metamorphic minerals (i.e. microdiamond and coesite) by laser Raman spectroscopy. In some instances, coesite + quartz and diamond + graphite occur together in a single rock sample, and inclusion aggregates also comprise polycrystalline diamond crystals overgrowing graphite. Secondary electron microscope and cathodoluminescence studies reveal that many zircons display distinct zonation textures, which comprise core and wide mantle, each with distinctive inclusion microassemblages. Pre-UHP metamorphic minerals such as graphite, quartz, phengite and apatite are common in the core, whereas diamond, coesite, garnet and jadeite occupy the mantle. The inclusions in core are irrelevant to the UHP metamorphism. The zircon core is of detrital or relatively low-grade metamorphic origin, whereas the mantle is of HP to UHP metamorphic origin. The zonal arrangement of inclusions and the presence of coesite and diamond without back-reaction imply that aqueous fluids were low to absent within the zircons during both prograde and retrograde metamorphism, and that the zircon preserves a prograde pressure–temperature record of the Kokchetav metamorphism which, elsewhere, has been more or less obliterated in the host rock.     

Overview of the geology, petrology and tectonic framework of the high-pressure–ultrahigh-pressure metamorphic belt of the Kokchetav Massif, Kazakhstan

Abstract High‐ to ultrahigh‐pressure metamorphic (HP–UHPM) rocks crop out over 150 km along an east–west axis in the Kokchetav Massif of northern Kazakhstan. They are disposed within the Massif as a 2 km thick, subhorizontal pile of sheet‐like nappes, predominantly composed of interlayered pelitic and psammitic schists and gneisses, amphibolite and orthogneiss, with discontinuous boudins and lenses of eclogite, dolomitic marble, whiteschist and garnet pyroxenite. On the basis of predominating lithologies, we subdivided the nappe group into four north‐dipping, fault‐bounded orogen‐parallel units (I–IV, from base to top). Constituent metabasic rocks exhibit a systematic progression of metamorphic grades, from high‐pressure amphibolite through quartz–eclogite and coesite–eclogite to diamond–eclogite facies. Coesite, diamond and other mineral inclusions within zircon offer the best means by which to clarify the regional extent of UHPM, as they are effectively sequestered from the effects of fluids during retrogression. Inclusion distribution and conventional geothermobarometric determinations demonstrate that the highest grade metamorphic rocks (Unit II: T = 780–1000°C, P = 37–60 kbar) are restricted to a medial position within the nappe group, and metamorphic grade decreases towards both the top (Unit III: T = 730–750°C, P = 11–14 kbar; Unit IV: T = 530°C, P = 7.5–9 kbar) and bottom (Unit I: T = 570–680°C; P = 7–13.5 kbar). Metamorphic zonal boundaries and internal structural fabrics are subhorizontal, and the latter exhibit opposing senses of shear at the bottom (top‐to‐the‐north) and top (top‐to‐the‐south) of the pile. The orogen‐scale architecture of the massif is sandwich‐like, with the HP–UHPM nappe group juxtaposed across large‐scale subhorizontal faults, against underlying low P–T metapelites (Daulet Suite) at the base, and overlying feebly metamorphosed clastic and carbonate rocks (Unit V). The available structural and petrologic data strongly suggest that the HP–UHPM rocks were extruded as a sequence of thin sheets, from a root zone in the south toward the foreland in the north, and juxtaposed into the adjacent lower‐grade units at shallow crustal levels of around 10 km. The nappe pile suffered considerable differential internal displacements, as the 2 km thick sequence contains rocks exhumed from depths of up to 200 km in the core, and around 30–40 km at the margins. Consequently, wedge extrusion, perhaps triggered by slab‐breakoff, is the most likely tectonic mechanism to exhume the Kokchetav HP–UHPM rocks.