Nonlinear Rate Dependent Model of High Damping Rubber Bearing

The accurate analysis of the response of isolated structures requires the application of appropriate models of isolation devices. The purpose of this paper is to analyse a nonlinear strain rate dependent model of a high damping rubber bearing which simulates the horizontal behaviour of the device under specified vertical load using a nonlinear elastic spring-dashpot element. The effectiveness of the model is checked by fitting the experimental data concerning three different rubber bearings. The results of the study show that the model can simulate the bearing behaviour over a wide shear strain range with small simulation errors. This revised version was published online in July 2006 with corrections to the Cover Date.     

The hydrogeology of the Ballimore region,central New South Wales,Australia: an integrated study

The integrated use of geophysical, geological, hydrogeochemical and hydrogeological data has allowed the development of a plausible conceptual model for groundwater flow in the Ballimore region. A realistic model for this under-explored system could not be derived solely by the use of hydrogeological data. Interpretation of the available datasets indicates that two groundwater systems are active: a regional and a local system. These are separated by a regionally extensive aquiclude. Groundwater flow in the regional groundwater system is controlled by the structural fabric of the Palaeozoic basement rocks. The local groundwater system is restricted to the Permian to Recent sequence of cover rocks. The local groundwater system is subdivided into three cells: the deep, intermediate and shallow cells. Groundwater flow within the deep cell of the local groundwater system is controlled by fracture flow. Groundwaters from this aquifer are under artesian pressure and are effervescent (CO₂-gas). The intermediate cell is a leaky aquitard that acts as a mixing zone between the deep and shallow cells. Groundwater flow within the shallow cell is controlled by the influx of surface waters which migrate laterally through permeable beds.     

TraceeElements in Leccinum scabrum mushrooms and topsoils from Kłodzka Dale in Sudety Mountains, Poland

In the current study, we determined concentrations and transfer rates of Ag, Al, Ba, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, P, Rb, Sr and Zn to Brown Birch Scaber Stalks (Leccinum scabrum) mushrooms emerged in the area of Sudety Mountains (Sudetes) in Poland. Fruiting bodies and topsoil samples beneath L. scabrum were collected form the K odzka Dale. The trace elements were determined using validated method and inductively coupled plasma - atomic emission spectroscopy (ICP-AES) for final measurement. Mushrooms contained Ag, Cr, Hg, Co, Ni and Sr at < 1.0 μg/g dry weight; Ba and Pb at ~1.0 μg/g dw; Cd at < 5 μg/g dw; Cu and Mn at > 10 μg/g dw; Al and Ca at ~100 μg/g dw; Fe, Na, Rb and Zn at 100 to 500 μg/g dw, Mg at ~1,000 μg/g dw; P at ~5,000 μg/g dw and K at ~30,000 μg/g dw. Ca, Mn and Ni were nearly equally distributed between stipes and caps; stipes compared to caps were enriched in Ba, Na and Sr, while caps were enriched in Ag, Al, Cd, Co, Cr, Cu, Fe, K, P, Pb, Rb and Zn. The values of bioconcentration factor (BCF) varied highly depending on chemical element and were >1 for Ag, Cd, Cu, K, Mg, Na, P, Rb and Zn, while <1 for Al, Ba, Ca, Co, Cr, Fe, Mn, Ni, Pb and Sr. Topsoil showed elevated content of lead and mean concentration was 99 ± 32 μg/g dw, while cadmium was at 0.41 ± 0.15 and those two highly toxic to human elements occurred in edible caps of L. scabrum at 4.5 ± 2.2 and 2.9 ± 2.0 μg/g dw, respectively.     

Arguments for ionic nature of the Carpathian electric conductivity anomaly

This publication is a contribution to discussion on the geometry and petrography of the rock complex responsible for the Carpathian conductivity anomaly. We analysed arguments showing that this anomaly is caused by induction in the sedimentary basin, and make a critical review of various data to find out whether the good conductivity is connected with a rock complex containing graphite or mineralized water. We conclude that a more likely mechanism is the ionic one, i.e., the existence of fluids, although a final decision can only be made on the basis of deep drillings.     

Compositions,sources and depositional environments of organic matter from the Middle Jurassic clays of Poland

The comprehensive biomarker characteristics from previously undescribed Middle Jurassic clays of Poland are presented. The molecular composition of the organic matter (OM) derived from clays of Aalenian to Callovian age has not changed significantly through time. High relative concentrations of many biomarkers typical for terrestrial material suggest a distinct dominance of OM derived from land plants. Increasing concentrations of C₂₉-diaster-13(17)-enes towards the northern part of the basin indicate an increase in terrestrial input. This terrestrial material would have originated from the enhanced transport of organic matter from land situated at the northern bank of the basin, i.e., the Fennoscandian Shield. The organic matter was deposited in an oxic to suboxic environment, as indicated by relatively low concentrations of C₃₃–C₃₅ homohopanes, moderate to high Pr/Ph ratio values, an absence of compounds characteristic for anoxia and water column stratification, such as isorenieratane, aryl isoprenoids and gammacerane, as well as common benthic fauna and burrows. δ¹⁸O measurements from calcitic rostra of belemnites suggest that the mean value of the Middle Jurassic sea-water temperature of the Polish Basin was 13.1 °C. It is suggested that this mirrored the temperature of the lower water column because belemnites are considered here to be necto-benthic. The organic matter from the Middle Jurassic basin of Poland is immature. This is clearly indicated by a large concentration of biomarkers with the biogenic configurations, such as ββ-hopanes, hop-13(18)-enes, hop-17(21)-enes, diasterenes and sterenes. The identification of preserved, unaltered biomolecules like ferruginol, 6,7-dehydroferruginol and sugiol in Protopodocarpoxylon wood samples from these sediments present particularly strong evidence for the presence of immature OM in the Middle Jurassic sediments. Moreover, the occurrence of these polar diterpenoids is important due to the fact that they are definitely the oldest known natural products detected in geological samples.     

Gas emission prediction and recovery in underground coal mines

Strata gas can be released and captured from non-active and active gas resources either from virgin or relaxed strata, both prior to and when mining activities take place. The high and irregular gas emissions associated with high production longwall mining have provided a need to optimise the methods used to predict these gas levels and the ventilation requirements for gas dilution. A forecast of gas emissions during development drivage and longwall mining indicated possible gas and ventilation problems requiring the introduction of various gas drainage techniques and in maintaining the necessary air quantities in ventilation systems to satisfy the statutory gas limitations for various coal production rates. Although there are sound principles used in world-recognised methods of gas emission prediction, a new approach developed from long-term practical experience in underground gassy coal mine practices and gas-rock mechanics studies appear most suitable for local conditions and mining systems in use. The Lunagas ‘Floorgas' and ‘Roofgas' geomechanical and gas emission models offer an effective solution to these problems. Both programs are the most advanced engineering, numerical tools available to calculate gas source contributions to total gassiness and improve the accuracy and quality of gas control, gas capture technologies and ventilation system design.     

Hydrodynamic Equilibrium for Sediment Transport and Bed Response to Wave Motion

An experimental and theoretical identification of hydrodynamic equilibrium for sediment transport and bed response to wave motion are considered. The comparison between calculations and the results of laboratory experiments indicates the linear relation between sediment transport rate and the thickness zm of bed layer in which sediments are in apparent rectilinear motion. This linear relationship allows to use the first order “upwind” numerical scheme of FDM ensuring an accurate solution of equation for changes in bed morphology. However, it is necessary to carry out a decomposition of the sediment transport into transport in onshore direction during wave crest and offshore direction during wave trough. Further, the shape of bed erosion in response to sediment transport coincides with the trapezoid envelope or with part of it, when some sediments still remain within it. Bed erosion area is equal to the one of a rectangle with thickness znm.     

Thermal history and large scale differentiation of the Saturn’s satellite Rhea

Thermal history of Rhea from the beginning of accretion is investigated. We developed a numerical model of convection combined with the parameterized theory. Large scale melting of the satellite’s matter and gravitational differentiation of silicates from ices are included. The results are confronted with observational data from Cassini spacecraft that indicate minor differentiation of the satellite’s interior. We suggest that partial differentiation of the satellite’s interior is accompanied (or followed) by the process of light fraction uprising to the surface. The calculation indicates that the partial differentiation of the matter of the satellite’s interior is possible only for narrow range of parameters. In particular, we found that the time from the formation of CAI (calciumaluminum rich inclusions in chondrites) to the end of accretion of Rhea is in the range of 3–4 My.