Effect of spatial variation characteristics on contouring of design storm depth

The ordinary kriging method, a geostatistical interpolation technique, was applied for developing contour maps of design storm depth in northern Taiwan using intensity–duration–frequency (IDF) data. Results of variogram modelling on design storm depths indicate that the design storms can be categorized into two distinct storm types: (i) storms of short duration and high spatial variation and (ii) storms of long duration and less spatial variation. For storms of the first category, the influence range of rainfall depth decreases when the recurrence interval increases, owing to the increasing degree of their spatial independence. However, for storms of the second category, the influence range of rainfall depth does not change significantly and has an average of approximately 72 km. For very extreme events, such as events of short duration and long recurrence interval, we do not recommend usage of the established design storm contours, because most of the interstation distances exceed the influence ranges. Our study concludes that the influence range of the design storm depth is dependent on the design duration and recurrence interval and is a key factor in developing design storm contours. Copyright © 2003 John Wiley & Sons, Ltd.     

The global joule heat production rate and the AE index

The accuracy of the AE index as a measure of the joule heat production rate is examined for a typical substorm event on 18 March 1978 by estimating the global joule heat production rate, as a function of time, using data obtained from the IMS six meridian chains. In spite of the fact that the AE index had had an initial slow growth which was followed by a rapid growth, the joule heat production rate attained a high level during the slow growth and thus their variations were considerably different from those of the AE index. Therefore, although the AE index is statistically linearly related to the global joule heat production rate, one should be cautious in assuming that details of time variations of the AE index during individual events represent those of the joule heat production rate.     

海洋走航式单边连续观测地震折射波Δt解释方法--1种新的浅层折射单支时距曲线解释方法

在浅层工程折射地震测量中 ,通常采用相遇观测系统采集数据和相应的解释方法进行解释 ;对于单边观测采集方法由于与其相应的解释方法较少而少被采用。本文提出 1种方法简单、精度可靠、可直接利用同一点相邻 2排列 2次观测的初至折射时间并适合于海洋走航式单边连续观测系统的折射初至资料解释方法。其精度基本与同观测段的采用相遇观测的差异时距方法解释的精度十分接近。该方法即适合于人工解释又适合于计算机自动解释。     

雪宝顶碱性花岗岩岩石地球化学与成矿控制

对雪宝顶碱性花岗岩具有高丰度的W、Sn、Be含量和W、Sn矿化花岗岩的微量元素组合特征进行了分析，结果显示：稀土元素具有∑REE含量与LREE／HREE比值偏低和负Eu异常的特点；元素比值K／Rb，U／Th，Nb／Ta的规律性变化以及矿脉产状特征等表明W-(Sn)-Be脉状矿床形成于岩浆演化晚期，与岩浆期后的热液活动有关。     

一种腐屑食性鱼类对生态系统氮循环的影响

研究表明 :腐屑食性鱼类——梭鱼对环境中有机氮的摄入能力随体重的增加而增加 ,随温度的升高 ,体重系数显著减少。摄入氮 (CN,mg/ d)与体重 (W,g)和温度 (T,℃ )的数值关系可用如下模型表示 :CN=0 .6 370 W1 .0 642 ln(3.70 0 8T)。体重为 1 0 0 g的梭鱼每日可消耗环境中 332 mg氮有机质。梭鱼氮的吸收效率主要受温度的影响 ,而氮的转化效率与体重呈显著的正相关关系。随体重的增加 ,排泄氮所占比例降低     

LAS格式解析及其扩展域的应用

激光雷达是近年来兴起的一种快速获取地物目标三维信息的主动遥感技术。其采集的离散激光点具有数据量大,信息丰富等特点。目前常用的LIDAR数据存储格式,在存储LIDAR数据时存在种种不足,且数据交换和共享困难。LAS格式是ASPRS制定的标准LIDAR数据交换格式,能较好地解决多属性离散激光点数据的存储问题,具有结构严谨,便于扩展等优点。本文在对LAS格式进行解析的基础上,针对LAS变长记录的扩展域,介绍了一些实际的应用。     

基于ArcGIS的1:5万DLG数据库生成地形图的设计与实现

探讨在ArcGIS环境下利用1:5万DLG数据库直接生成地形图的若干关键技术,如定制1:5万DLG符号库、符号配置,并给出地形图生产的完整的工艺流程,这样能够缩短1:5万地形图的成图周期,提高工作效率。     

DLG产品版权标记技术研究综述

数字线划地图(DLG)产品因其生产成本高昂、精度高,与经济发展和国防安全大局息息相关,其版权保护问题意义重大。以数字水印为代表的版权标记技术是DLG产品目前主要的版权保护技术。基于进一步研究与应用需要,从版权标记理论基础、标记生成、标记嵌入、标记检测以及实时操作监控等五个方面,综述当前应用版权标记技术对DLG数据产品进行版权保护的现状及发展趋势。     

基于IRS-P5卫星立体影像的地形图测绘试验

简要介绍了印度 IRS-P5卫星立体影像的特点及其应用前景,重点介绍了使用某地区的立体像对数据进行的1:10000地形图测绘有关试验研究。结果表明,在高精度的地面控制点的支持下,地形类别为山地的地形图平面和高程精度均可满足国家1:10000基本比例尺地形图测图规范要求。