Heat influx and exhumation of the Shimanto accretionary complex: Miocene fission track ages from the Kii Peninsula, southwest Japan

Abstract   To determine how local geological events contributed to the evolution of accretionary complexes and eventual exposure of rocks with different structural levels, geochronological mapping was carried out using fission track (FT) analysis at the Kii Peninsula, southwest Japan. At this site, the original zonal structure of Cretaceous accretionary complexes parallel to the subduction zone is disturbed by the northward projection of the Shimanto accretionary complex. Twenty-six zircon FT ages were obtained from an area of ∼12 km in an east–west direction and ∼15 km in a north–south direction, and classified into three groups: (i) ages ∼15 Ma (range ∼10–20 Ma), which are distributed along the northwest–southeast valley; (ii) ages of ∼50 Ma in the northwest of the study area; and (iii) ages older than those in Groups 1 and 2. Based on results from eight zircon FT length distributions, the Miocene ages appear to be the result of spatial variations in heat influx and cooling after the regional exhumation of the area, as recorded by FT ages of ∼50 Ma.     

Geological and geochemical examination of arsenic contamination in groundwater in the Holocene Terai Basin, Nepal

Geological and geochemical study has been carried out to investigate arsenic contamination in groundwater in Nawalparasi, the western Terai district of Nepal. The work carried out includes analyses of core sediments, provenance study by rare earth elements analyses, ¹⁴C dating, and water analyses. Results showed that distribution of the major and trace elements are not homogeneous in different grain size sediments. Geochemical characteristics and sediment assemblages of the arsenic contaminated (Nawalparasi) and uncontaminated (Bhairahawa) area have been compared. Geochemical compositions of sediments from both the areas are similar; however, water chemistry and sedimentary facies vary significantly. Extraction test of sediment samples showed significant leaching of arsenic and iron. Chemical reduction and contribution from organic matter could be a plausible explanation for the arsenic release in groundwater from the Terai sediments.     

A Simple Single-Layer Urban Canopy Model For Atmospheric Models: Comparison With Multi-Layer And Slab Models

We developed a simple, single-layer urban canopy model, and comparedit to both multi-layer and slab models. Our single-layer model has thefollowing features: (a) It is a column model of energy and momentumexchange between an urban surface and the atmosphere, (b) it includesthe influence of street canyons, which are parameterized to representthe urban geometry, (c) it includes shadowing from buildings andreflection of radiation, and (d) it estimates both the surfacetemperatures of, and heat fluxes from, three surface types: roof, wall,and road. In the simulation of the single-layer model, the roof washottest during the daytime, but coolest from midnight to early morning.This is consistent with output from the multi-layer model and fieldobservations at a residential area on a clear, summer day. The diurnalvariation of the energy budget from the single-layer model agrees wellwith that from the multi-layer model. Our single-layer model'sperformance is nearly that of a multi-layer model for studyingmesoscale heat islands. Nevertheless, it is simply parameterized,and thus easily included in larger-scale atmospheric models. The slabmodel has the largest nighttime cooling rate of the three models. Toovercome this, it needs more adjustments than for the canopy models.     

Olivine phenocrysts in some Cameroonian Basalts—implications for primary magma composition

Summary The chemical composition of olivine phenocrysts was determined for 13 basaltic samples taken from the central part of the Cameroon Volcanic line to estimate the compositions of the primary olivine phenocrysts and the primary magmas. The Mg/(Mg + Fe) ratios of the olivines attain 0.91, though many of the magnesian olivines are identified on a textural basis as xenocrysts from peridotite inclusions. Most magnesian olivine phenocrysts have Mg/(Mg + Fe) ratios of 0.87–0.88 and NiO contents of 0.32–0.35 wt %. The NiO versus Mg/(Mg + Fe) ratios of the olivines can be used to estimate the compositions of the primary phenocrysts in a range of Mg/(Mg + Fe) = 0.88–0.90. Assuming the Fe(3)/(total Fe) ratios of the magmas are 0.17–0.25, which is estimated from the Fe-Mg partitioning between plagioclase and groundmass, the compositions of the primary magmas were obtained from the Fe²⁺-Mg partition equilibrium with the primary olivine phenocrysts. The primary magmas of the Cameroonian basalts have 13.5 ± 4.0 wt MgO, which is similar to the compositions of basalts with highest MgO contents reported so far from the Cameroon volcanic line.

---

Olivin Kristalle in einigen Basalten aus Kamerun: Hinweise auf die Zusammensetzung des primitiven Magmas

Zusammenfassung Die chemische Zusammensetzung von Olivin Phenokristallen wurde in 13 Basalt-Proben, die vom Zentralteil .des Kamerun-Vulkangürtels stammen, bestimmt, um Hinweise auf die Zusammensetzung der primären Olivineinsprenglinge and des primären Magmas zu erlangen. Die Mg/(Mg + Fe) Verhältnisse der Olivine reichen bis 0.91, obwohl viefle dieser Mg-Olivine auf Grund textureller Kriterien als aus Peridotit-Einschlüssen stammende Xenokristalle zu identifizieren sind. Die Mg/(Mg + Fe) Verhältnsse der Hauptmasse der Olivin-Phenokristalle liegen im Bereich von 0.87 bis 0.88, die Ni0 Gehalte zwischen 0.32 und 0.35 Gew %. Die Ni0 gegen Mg/(Mg + Fe) Verhältnisse eignen sich zur Abschätzung der Zusammensetzung der primären Phenokristalle, solange die Mg/(Mg + Fe) Verhältnisse im Bereich von 0.88 bis 0.90 liegen. Die Zusammensetzung des Primärmagmas wurde mittels der Fe²⁺-Mg-Verteilung zwischen dem Magma und den sich mit dem Magma im Gleichgewicht befindlichen primären Olivinkristallen unter der Annahme eines Fe³⁺/Fe total Verhältnisses von 0.17–0.25, welches sich aus der Mg-Fe Verteilung zwischen Plagioklas und Grundmasse ergibt, bestimmt. Demnach ergibt sich für das primäre Magma der Kamerun Basalte ein MgO Gehalt von 13.5 + 4.0 Gew%. Dieser Wert ist mit der Zusammensetzung von Basalten mit höchsten MgO-Gehalten, wie sie bisher vom Kamerun-Vulkangürtel berichtet worden sind, vergleichbar.

---

---

With 6 Figures     

Periodic Intrusion of Cold Water from the Pacific Ocean into the Bottom Layer of the Bungo Channel in Japan

A cold-water intrusion, called a “bottom intrusion”, occurs in the lower layer of the Bungo Channel in Japan. It is an intrusion from the shelf slope region of the Pacific Ocean margin in the south of the channel. In order to reveal the fundamental characteristics of the bottom intrusion, we conducted long-term observations of water temperature at the surface and bottom layers of the channel and 15-day current observations at the bottom of the shelf-break region. The long-term water temperature data indicated that the bottom intrusion occurs repeatedly between early summer and late autumn, and its reiteration between early and mid-summer causes a local minimum of water temperature in the lower layer in mid-summer. Moreover, the data revealed that most of the bottom intrusions occurred in neap tidal periods. The current meter recorded a bottom intrusion with a speed of approximately 15 cm⋅s⁻¹. The current meter also revealed that the intruded cold water slowly retreated back to the shelf slope region after the intrusion. This revised version was published online in July 2006 with corrections to the Cover Date.     

Responses of phytoplankton and heterotrophic bacteria in the northwest subarctic Pacific to in situ iron fertilization as estimated by HPLC pigment analysis and flow cytometry

To verify the hypothesis that the growth of phytoplankton in the Western Subarctic Gyre (WSG), which is located in the northwest subarctic Pacific, is suppressed by low iron (Fe) availability, an in situ Fe fertilization experiment was carried out in the summer of 2001. Changes over time in the abundance and community structure of phytoplankton were examined inside and outside an Fe patch using phytoplankton pigment markers analyzed by high-performance liquid chromatography (HPLC) and flow cytometry (FCM). In addition, the abundance of heterotrophic bacteria was also investigated by FCM. The chlorophyll a concentration was initially ca. 0.9 μg l⁻¹ in the surface mixed layer where diatoms and chlorophyll b-containing green algae (prasinophytes and chlorophytes) were predominant in the chlorophyll biomass. After the iron enrichment, the chlorophyll a concentration increased up to 9.1 μg l⁻¹ in the upper 10 m inside the Fe patch on Day 13. At the same time, the concentration of fucoxanthin (a diatom marker) increased 45-fold in the Fe patch, and diatoms accounted for a maximum 69% of the chlorophyll biomass. This result was consistent with a microscopic observation showing that the diatom Chaetoceros debilis had bloomed inside the Fe patch. However, chlorophyllide a concentrations also increased in the Fe patch with time, and reached a maximum of 2.2 μg l⁻¹ at 5 m depth on Day 13, suggesting that a marked abundance of senescent algal cells existed at the end of the experiment. The concentration of peridinin (a dinoflagellate marker) also reached a maximum 24-fold, and dinoflagellates had contributed significantly (>15%) to the chlorophyll biomass inside the Fe patch by the end of the experiment. Concentrations of 19′-hexanoyloxyfucoxanthin (a prymnesiophyte marker), 19′-butanoyloxyfucoxanthin (a pelagophyte marker), and alloxanthin (a cryptophyte marker) were only incremented a few-fold increment inside the Fe patch. On the contrary, chlorophyll b concentration reduced to almost half of the initial level in the upper 10 m water column inside the Fe patch at the end of the experiment. A decrease with time in the abundance of eukaryotic ultraphytoplankton (<ca. 5 μm in size), in which chlorophyll b-containing green algae were possibly included was also observed by FCM. Overall, our results indicate that Fe supply can dramatically alter the abundance and community structure of phytoplankton in the WSG. On the other hand, cell density of heterotrophic bacteria inside the Fe patch was maximum at only ca. 1.5-fold higher than that outside the Fe patch. This indicates that heterotrophic bacteria abundance was little respondent to the Fe enrichment.     

Optical properties of the red tide in Isahaya Bay,southwestern Japan: Influence of chlorophyll a concentration

Remote sensing reflectance [R _rs(λ)] and absorption coefficients of red tides were measured in Isahaya Bay, southwestern Japan, to investigate differences in the optical properties of red tide and non-red tide waters. We defined colored areas of the sea surface, visualized from shipboard, as “red tides”. Peaks of the R _rs(λ) spectra of non-red tide waters were at 565 nm, while those of red tides shifted to longer wavelengths (589 nm). The spectral shape of R _rs(λ) was close to that of the reciprocal of the total absorption coefficient [1/a(λ)], implying that the R _rs(λ) peak is determined by absorption. Absorption coefficients of phytoplankton [a _ph(λ)], non-pigment particles and colored dissolved organic matter increased with increasing chlorophyll a concentration (Chl a), and those coefficients were correlated with Chl a for both red tide and non-red tide waters. Using these relationships between absorption coefficients and Chl a, variation in the spectrum of 1/a(λ) as a function of Chl a was calculated. The peak of 1/a(λ) shifted to longer wavelengths with increasing Chl a. Furthermore, the relative contribution of a _ph(λ) to the total absorption in red tide water was significantly higher than in non-red tide water in the wavelength range 550–600 nm, including the peak. Our results show that the variation of a _ph(λ) with Chl a dominates the behavior of the R _rs(λ) peak, and utilization of R _rs(λ) peaks at 589 and 565 nm may be useful to discriminate between red tide and non-red tide waters by remote sensing.     

Changes in the abundance and composition of picophytoplankton in relation to the occurrence of a Kyucho and a bottom intrusion in the Bungo Channel,Japan

The Bungo Channel in southwestern Japan receives both warm, called Kyucho, and cold deep-water intrusions (bottom intrusion) from the Pacific Ocean. Abundances of Prochlorococcus, Synechococcus, and eukaryotic picophytoplankton were monitored from 18 July to 17 August 2001 to clarify whether advected picophytoplankton from the Pacific Ocean can grow in the channel or not. Synechococcus cells were further discriminated into low- and high-PUB types according to their fluorescence property in flow cytometry. From 18 to 25 July, the water temperature decreased by 3 °C at a 5-m depth at all stations, indicating the occurrence of a bottom intrusion. From 25 July to 4 August, a Kyucho occurred and the water temperature rapidly increased. From 4 to 17 August, a bottom intrusion and a Kyucho both occurred twice, although the intensities were smaller than those occurring until 4 August. From 18 to 30 July, the abundance of both Prochlorococcus and a high-PUB type of Synechococcus drastically decreased because of a bottom intrusion; however, the abundances rapidly increased due to the advection by a Kyucho. These advected cells increased from 4 to 17 August in the channel and Kitanada Bay. Changes in the abundance of low-PUB type of Synechococcus and eukaryotic picophytoplankton were less noticeable than those in the abundance of Prochlorococcus and high-PUB type. The present study demonstrated that oceanic picophytoplankton advected by the Kyucho could grow in the channel. However, abundances of low-PUB type and eukaryotic picophytoplankton increased higher than those of Prochlorococcus and high-PUB type did. Thus, these oceanic phytoplankters will be excluded when Kyucho does not occur for a long time. The co-occurrence of various types of picophytoplankton found in the channel is probably achieved by both Kyucho event and their growth capability in the channel.     

Jellyfish patch formation investigated by aerial photography and drifter experiment

Jellyfish patch formation is investigated by conducting a drifter experiment combined with aerial photography of a sustained patch of the moon jellyfish in Hokezu Bay, Japan. Jellyfish patches are aggregations of individuals that are caused by a combination of swimming (active influence) and advection by currents (passive influence). The drifter experiment involved the injection of 49 drifters around a distinct surface patch of jellyfish within an area of approximately 300 m × 300 m. The drifters’ motion, caused only by the passive influence, was recorded in a series of 38 aerial photographs taken over approximately 1 h. The ambient uniform current field larger than the patch scale was estimated from the movement of the centroid position of drifters, while the distribution of horizontal divergence and relative vorticity around the patch was estimated from the time-derivative in areas of triangles formed by the drifters. The centroid positions of both drifters and patches moved stably toward the bay head at different speeds. The difference vector between the patch and drifter centroids was directed to the sun, and was opposite to the ambient current. The distributions of vorticity and divergence around patches exhibited inhomogeneity within the patch scale, and the drifters in this nonuniform current field aggregated near the convergence area within 1 h. The results suggest that horizontal patch formation is predominantly influenced by passive factors at the surface of Hokezu Bay. Furthermore, the upward swimming against downwelling may make sustained patch in surface layer.     

Numerical forecasting of the time interval between successive M8 earthquakes along the Nankai Trough,southwest Japan,using ocean bottom cable network data

One possible approach to estimating the time interval between large-scale Tōnankai (Tōkai) and Nankai earthquakes on the Japan arc is sequential assimilation of crustal deformation data. We conducted numerical modeling of sequential assimilation using surface deformation calculated from earthquake generation cycle simulations along the Nankai Trough. To account for observation noise, we used measured ocean bottom pressure gauge data, excluding tidal modulation, from a station on the ocean bottom cable network Dense Oceanfloor Network System for Earthquakes and Tsunamis in the Kumano basin. We used sequential importance sampling as our data assimilation method. We found that as the amount of data increased, the estimated time interval between the Tōnankai and Nankai earthquakes approached the “true” observed interval. In addition, the noise in the pressure gauge data was sufficiently small that simulated crustal deformation patterns could be distinguished for different time intervals.