The geochemistry of lead in rivers,estuaries and the continental shelf of the Southeastern United States

Transport by southeastern rivers has insignificant influence on the lead concentration of southeastern shelf waters. If the rate of mobilization and transport of lead by these rivers is representative of uncontaminated fluvial transport during the Pleistocene, only about 5% of the prehistoric output of lead to the North Atlantic can be accounted for by river input.Lead concentrations in southeastern shelf waters are similar to those of North Atlantic Water from the upper 1000 m, which is probably similar to the intrusion source water for the shelf. Atmospheric inputs to the shelf of the same magnitude as observed for the Western North Atlantic are difficult to reconcile given the residence time of shelf waters and their lead concentration unless the rate of loss of lead to shelf sediments is about the same as the atmospheric flux.     

An experimental analysis of spatial competition in a dense infaunal community: The importance of relative effects

A densely populated soft-sediment community was experimentally analysed for interspecific competition for space in laboratory experiments. No interspecific competitive interactions leading to a decrease in survivorship could be documented over a five-week period. The four most abundant species all coexisted in laboratory microcosms. The two tube-buiding species, the tanaid Leptochelia dubia and the polychaete Rhynchospio arenincola, could not exclude the mobile bivalve Transennella tantilla or the burrowing amphipod Paraphoxus spinosus. None of the species increases its emigration frequency when other species are present. Paraphoxus is found to be a browsing predator on Phynchospio but inflicts no detectable mortality. The coexistence of these species is permitted by virtue of the fact that none of the species can alter the soft-sediment habitat sufficiently to make the habitat unsuitable for the other species.     

New paleomagnetic results from the Aegean extensional province

Various Oligocene formations from NE Greece (ignimbrites from the Medousa area, rhyolites from Zagradenia, granodiorites from Elatia) show discordant paleomagnetic signatures, in each case indicating small cw (clockwise) rotation and also inclination flattening. Marls from Pithion were partly remagnetized in a present-day field. Samples that contain ancient magnetization components also indicate small cw rotation and inclination flattening. However, the magnetization of andesites from Peplos reflects a considerably larger rotation, likely owing to local tectonics. In the context of previous work in the area, these results are used to propose a subdivision of NE Greece into four structural zones of distinctive rotational behaviour (from east to west): sites in zone 1, east of the Kavala-Xanthi-Komotini fault (KXK), show various cw and ccw (counterclockwise) rotation angles owing to complex kinematics resulting from the interaction of the KXK and the north-Anatolian fault zone. However, zone 2, between the KXK and the Strymon valley, is structurally homogeneous ( 10° cw rotation). The paleomagnetic signature of the Vertiskos massif (zone 3) implies a larger (> 30°) cw rotation, whereas sites in the Vardar basin (zone 4) contain a paleomagnetic signature similar to that of zone 2. This suggests a motion of the Vertiscos massif, a meta-ophiolitic nappe, relative to underlying strata. Indeed, zones 2 and 4 may be parts of the same structural unit which underlies this nappe.     

Joule heating of Io's ionosphere by unipolar induction currents

The unexpectedly large scale height of Io's ionosphere (Kliore, A., et al., 1975, Icarus24, 407–410) together with the relatively large molecular weight of the likely principal constituent, SO₂ (Pearl, J., et al., 1979, Nature280, 755–758), suggest a high ionospheric temperature. Electrical induction in Io's ionosphere due to the corotating plasma bound to the Jovian magnetosphere is one possible source for attainment of such high temperatures. Accordingly, unipolar induction models were constructed to calculate ionospheric joule heating numerically. Heating rates produced by highly simplified models lie in the range 10^?9 to 10^?8 W/m³. These heating rates are lower than those determined from uv photodissociative heating models (Kumar, S., 1980, Geophys. Res. Lett.7, 9–12) at low levels in the ionosphere but are comparable in the upper ionosphere. The low electrical heating rate throughout most of the ionosphere is due to the power limitation imposed by the Alfvén wings which complete the electrical circuit (Neubauer, F.M., 1980, J. Geophys. Res.85, 1171–1178). Contrary to the pre-Voyager calculations of Cloutier, P. A., et al. (1978, Astrophys. Space Sci.55, 93–112), our numerical results show that the J × B force density due to unipolar induction currents in the ionosphere is much less than the gravitational force density when the combined mass of the neutral species is included. The binding and coupling of the ionosphere is principally due to the relatively dense (possibly localized) neutral SO₂ atmosphere. In regions where the ions and neutrals are collisionally coupled the ionosphere will not be stripped off by the J × B forces. However at a level above that (to which the ions move by diffusion only) the charged species would be removed. Thus there appears to be no need to postulate the existence of an intrinsic Ionian magnetic field as suggested by Kivelson, M. G., et al. (79, Science 205, 491–493) and Southwood, S. J., et al. (1980, J. Geophys. Res., in press) in order to retain the observed ionosphere.     

Sources of Sediment in Lake Pepin on the Upper Mississippi River in Response to Holocene Climatic Changes

Sediments from Lake Pepin on the Mississippi River, southeastern Minnesota, are used as provenance tracers to assess variations in hydrology and sediment-transport during the middle Holocene. Three rivers contribute sediment to Lake Pepin, and each catchment is characterized by a distinctly different geologic terrain. The geochemical fingerprint for each drainage basin was determined from the elemental composition of heavy minerals in the silt-sized fraction of modern sediment samples. Down-core elemental abundances were compared with these fingerprints by use of a chemical-mass-balance model that apportions sediment to the source areas. We observed a decreased contribution from the Minnesota River during the interval ~6700–5500 ¹⁴C yr BP, which we attribute to decreased discharge of the Minnesota River, likely controlled by a combination of precipitation, snow melt, and groundwater input to the river. This hydrologic condition coincides with the mid-Holocene prairie period recorded by fossil pollen data. The occurrence of this feature in a proxy record for hydrologic variations supports the hypothesis that the mid-Holocene prairie period reflects drier conditions than before or after in midwestern North America.     

Experimental determination of the solubility of Au in silicate melts

Summary We report here new data on the solubility of Au in silicate melts of anorthite-diopside eutectic composition at a wide range of oxygen fugacities, from pure oxygen to 10^–8 atm, and at a temperature range of 1300 °C to 1480 °C. Because experiments were done with metal loops at temperatures above the Au-melting temperature, PdAu-metal-alloys had to be used. Pd-solubility data derived from the same set of experiments agree with earlier data obtained from experiments with pure Pd-metal (Borisov et al., 1994a). The results of the present experiments show that Pd-solubilities are by a factor of 2 to 6 higher than Au-solubilities. Both, Au and Pd solubilities decrease with decreasing oxygen fugacity. At oxygen fugacities below the iron-wiistite buffer (IW) Au solubility increases with decreasing fO₂ probably reflecting formation of Au-silicides at such reducing conditions. Compared to Pd, Au has higher activity coefficients in Fe-metal and lower solubility in silicate melts. This leads to similar metal-silicate partition coefficients for both elements. At a temperature of 1350 °C and an oxygen fugacity corresponding to IW-2 D^Au (met/sil) is about 2.5 · 10⁷ and D^Pd (met/sil) about 1.6 · 10⁷. Thus similar behavior is expected during metal separation in planetary bodies including core formation in the Earth. The metal/silicate partition coefficient of Ir is, however, by several orders of magnitudes higher (Borisov and Palme, 1995a). Equilibration with chondritic metal will therefore lead to grossly non-chondritic Pd/Ir or Au/Ir ratios in coexisting silicate phases. Chondritic ratios are thus indicative of the presence of unfractionated meteoritic components. Samples from the upper mantle of the Earth, for example, reflect the admixture of a late unfractionated (chondritic) veneer (e.g.,Kimura et al., 1974;Jagoutz et al., 1979).Solubilities of Pd and Au in silicate melts are much higher than the contents in terrestrial basalts implying that the abundances of these two elements are not buffered by residual PGE- and Au-containing alloys. The most likely process for fractionating PGEs in terrestrial magmas are mineral-melt (e.g., olivine/melt) equilibria.

---

Experimentelle Bestimmung der Löslichkeit von Au in Silikatschmelzen

Zusammenfassung In der vorliegenden Arbeit wird über die Ergebnisse der Bestimmung der Löslichkeit von Au in Silikatschmelzen mit der Zusammensetzung des Anorthit-Diopsid Eutektikums berichtet. Die Versuche wurden mittels Metallschlaufe über einen weiten Sauerstoffpartialdruckbereich, von reinem Sauerstoff bis zu 10^–8 atm und in einem Temperaturbereich von 1300 °C bis 1480 °C, durchgeführt. Da diese Temperaturen jedoch den Au-Schmelzpunkt überschreiten, wurde mit AuPd-Legierungen gearbeitet. Die Ergebnisse der dadurch zusätzlich erhaltenen Pd-Versuche stimmen mit früher bestimmten, mit reinen Pd-Schlaufen durchgeführten Pd-Löslichkkeiten überein (Borisov et al., 1994a). Die auf reine Metalle zurückgerechneten Löslichkeiten von Pd sind um einen Faktor 2 bis 6 mal höher als die entsprechenden Au-Löslichkeiten. Die Löslichkeiten beider Metalle nehmen mit abnehmendem Sauerstoffpartialdruck ab. Unter noch stärker reduzierenden Bedingungen (Eisen-Wüstit Gleichgewicht) nimmt die Löslichkeit von Au jedoch zu. Dies könnte auf die Bildung von Au-Siliziden zurückzuführen sein.Im Vergleich zu Pd sind die Aktivitätskoeffizienten von Au in metallischem Eisen höher, die Löslichkeiten in Silikatschmelzen jedoch niedriger. Das führt zu ähnlichen Metall/Silikat Verteilungskoeffizienten von Au und Pd. Bei einer Temperatur von 1350 °C und einer Sauerstoffugazität von IW-2 ergeben sich für D^Au (met/sil) 2.5 · 10⁷ und für D^Pd (met/sil) 1.6* 10⁷. Der Metall/Silikat-Verteilungskoeffizient von Ir ist jedoch unter den gleichen Bedingungen um mehrere Größenordnungen höher (Borisov andPalme, 1995a). Ein chondritisches Pd/Ir- oder Au/Ir-Verhältnis kann also auf die Anwesenheit einer unfraktionierten chondritischen Komponente zurückgeführt werden. Dies gilt beispielsweise für Proben aus dem oberen Erdmantel. Hier handelt es sich vermutlich um Zumischung einer späten chondritischen Akkretionskomponente, die sich nicht mehr mit einer metallischen Phase (Kern) ins Gleichgewicht gesetzt hat (z.B.Kimura et al., 1974,Jagoutz et al., 1979).Die Löslichkeiten von Pd und Au in Silikatschmelzen sind wesentlich höher als ihre Gehalte in basaltischen und komatiitischen Laven. Dies bedeutet, daß Au und Pd in Schmelzen aus dem Erdmantel nicht durch residuale Au- und/oder Pd-haltige Metall phasen bestimmt sind. Gleichgewichte zwischen Schmelze und Mineralen (z.B. Olivin) sind die wahrscheinlichsten Fraktionierungsmechanismen für Platingruppenelemente in terrestrischen Magmen.

---

---

With 5 Figures     

Origin of chondritic forsterite grains

Iron-poor and refractory lithophile element (RLE) rich forsterite grains occur in all major types of unequilibrated chondrites. In our laser ablation inductively coupled mass spectrometry (LA-ICPMS) minor and trace element study we show that refractory forsterites (RF) from carbonaceous (CC), unequilibrated ordinary (UOC) and a Rumuruti chondrite (RC) have similar chemical compositions with high RLE concentrations and low concentrations of Mn, Fe, Co and Ni. Fractionation of RLEs and rare earth elements (REEs) is in agreement with formation by crystallization from a RLE rich silicate melt. Low concentrations and the fractionation of moderately siderophile elements (Fe, Co, Ni) in RFs suggests formation at low oxygen fugacity, possibly in equilibrium with primitive Fe,Ni metal condensates in a gas of solar composition. Anomalously high Ti in the parental melt can be explained by Ti³⁺/Ti⁴⁺ ∼1.5, supporting formation of RF in highly reducing conditions. Low Mn concentrations indicate formation at high temperatures (>∼1160 K). The model of formation of RFs and the accompanying physico-chemical conditions during their formation as well as their relation to non refractory olivine are discussed.     

Representation of Uncertainty and Integration of PGIS-based Grazing Intensity Maps Using Evidential Belief Functions

In a project to classify livestock grazing intensity using participatory geographic information systems (PGIS), we encountered the problem of how to synthesize PGIS-based maps of livestock grazing intensity that were prepared separately by local experts. We investigated the utility of evidential belief functions (EBFs) and Dempster's rule of combination to represent classification uncertainty and integrate the PGIS-based grazing intensity maps. These maps were used as individual sets of evidence in the application of EBFs to evaluate the proposition that " This area or pixel belongs to the high, medium, or low grazing intensity class because the local expert(s) says (say) so ". The class-area-weighted averages of EBFs based on each of the PGIS-based maps show that the lowest degree of classification uncertainty is associated with maps in which "vegetation species" was used as the mapping criterion. This criterion, together with local landscape attributes of livestock use may be considered as an appropriate standard measure for grazing intensity. The maps of integrated EBFs of grazing intensity show that classification uncertainty is high when the local experts apply at least two mapping criteria together. This study demonstrates the usefulness of EBFs to represent classification uncertainty and the possibility to use the EBF values in identifying and using criteria for PGIS-based mapping of livestock grazing intensity.     

Coronal Holes and Icosahedral Symmetry

The study of the expansion of the solar wind out of a system of coronal holes is continued. To this end, we consider the numerical integration of partial differential equations for problems with icosahedral symmetry, in general. First, employing Weyl theory, orbifold coordinates are introduced. Second, the icosahedral coordinates are discussed in detail. Third, following an analysis of the properties of these coordinates and the derivation of a few expressions useful for grid construction, various alternatives for the distribution of lattice points required for numerical integration are considered. A comparison of these numerical grids motivates the choice of a specific grid optimized for the numerical integration carried out in the accompanying paper by Kalish et al.(2002). This revised version was published online in July 2006 with corrections to the Cover Date.     

Quartz as indicator mineral in the Central Swiss Alps: the quartz recrystallization isograd in the rock series of the northern Aar massif

Earlier observations on the deformation of rock-forming quartz during Alpine metamorphism that were made by Voll (1976) along a traverse following the Reuss valley (Aar massif, Central Swiss Alps) are still relevant but can be explained in more modern term. Voll found that a few kilometres south of the contact between the Aar massif and its sedimentary cover quartz has partly undergone a combination of dynamic recrystallization and nucleation along grain boundaries and fractures at the expense of the deformed parent grains. Further to the south, increasing grain growth of quartz under nearly static conditions is observed, with polygonal grain shapes typical of annealed microfabrics. Comparable stages of recrystallization could be found in several N–S traverses through the Aar massif so that “points of first occurrence” of newly formed quartz could be connected to define a quartz recrystallization isograd. This isograd extents over 90 km through the northern Aar massif, following a course parallel to the sanidine/microcline isograd but at a distance of 10–15 km further to the north. The evolution of the quartz microfabric is discussed with respect to recent estimates of the T-t path of the Aar massif.