The Magnetospheric cusps: A Summary

The polar cusps of the magnetosphere are key regions for the transfer of mass, momentum, and energy from the solar wind into the magnetosphere. Understaning these key regions and the dynamical interactions that occur there are fundamentally important to determining the physical nature of the magnetosphere. In this paper we try to summarize many of the conclusions reached in the papers of this special issue emphasizing the present concepts and definition of the cusp, what variations could be temporal structures and what could be spatial structures. We address the need for further measurements and the role of present and planned projects to address these needs.     

High-Altitude CUSP: The Extremely Dynamic Region in Geospace

The high-altitude dayside cusps (both northern and southern) are extremely dynamic regions in geospace. Large diamagnetic cavities with significant fluctuations of the local magnetic field strength have been observed there. These cusp diamagnetic cavities are always there day after day and are as large as 6 R_E Associated with these cavities are charged particles with energies from 20 keV up to 10 MeV. The intensities of the cusp energetic ions have been observed to increase by as much as four orders of the magnitude when compared with regions adjacent to the cusp which includes the magnetosheath. Their seed populations are a mixture of ionospheric and solar wind particles. The measured energetic ion fluxes in the high-altitude cusp are higher than that in both the regions upstream and downstream from the bow shock. Turbulent electric fields with an amplitude of about 10 mV/m are also present in the cusp, and a cusp resonant acceleration mechanism is suggested. The observations indicate that the dayside high-altitude cusp is a key region for transferring the solar wind mass, momentum, and energy into the Earth’s magnetosphere.     

Crustal thickening and crustal extension as controls on the evolution of the drainage network of the central Swiss Alps between 30 Ma and the present: constraints from the stratigraphy of the North Alpine Foreland Basin and the structural evolution of the Alps

The combined information about sedimentary petrography from the North Alpine Foreland Basin and structural geology from the Alps allows a qualitative reconstruction of the drainage network of the central Swiss Alps between 30 Ma and the present. This study suggests that crustal thickening and crustal thinning significantly controlled the location of the drainage divide. It also reveals the possible controls of crustal thickening/thinning on the change of the orientation of the drainage network from across-strike between 30 and 14 Ma to along-strike thereafter. Initial crustal thickening in the rear of the wedge is considered to have formed the drainage divide between north and south at 30 Ma. Because the location of crustal thickening shifted from east to west between ≈30–20 Ma, the catchment areas of the eastern dispersal systems reached further south than those of the western Alpine palaeorivers for the same time slice. Similarly, the same crustal dynamics appear to have controlled two phases of denudation that are reflected in the Molasse Basin by petrographic trends. Uplift in the rear of the wedge caused the Alpine palaeorivers to expand further southward. This is reflected in the foreland basin by increasing admixture of detritus from structurally higher units. However, tectonic quiescence in the rear of the wedge allowed the Alpine palaeorivers to cut down into the Alpine edifice, resulting in an increase of detritus from structurally lower units. Whereas uplift in the rear of the wedge was responsible for initiation of the Alpine drainage systems, underplating of the external massifs some 50 km further north is thought to have caused along-strike deviation of the major Alpine palaeorivers. Besides crustal thickening, extension in the rear of the wedge appears to have significantly controlled the evolution of the drainage network of the western Swiss Alps. Slip along the Simplon detachment fault exposed the core of the Lepontine dome, and caused a 50-km-northward shift of the drainage divide.     

Sedimentary Deposits from the 17 July 2006 Western Java Tsunami,Indonesia: Use of Grain Size Analyses to Assess Tsunami Flow Depth,Speed, and Traction Carpet Characteristics

The 2006 western Java tsunami deposited a discontinuous sheet of sand up to 20 cm thick, flooded coastal southern Java to a depth of at least 8 m and inundated up to 1 km inland. In most places the primarily heavy mineral sand sheet is normally graded, and in some it contains complex internal stratigraphy. Structures within the sand sheet probably record the passage of up to two individual waves, a point noted in eyewitness accounts. We studied the 2006 tsunami deposits in detail along a flow parallel transect about 750 m long, 15 km east of Cilacap. The tsunami deposit first becomes discernable from the underlying sediment 70 m from the shoreline. From 75 to 300 m inland the deposit has been laid down in rice paddies, and maintains a thickness of 10–20 cm. Landward of 300 m the deposit thins dramatically, reaching 1 mm by 450 m inland. From 450 m to the edge of deposition (around 700 m inland) the deposit remains <1 mm thick. Deposition generally attended inundation—along the transect, the tsunami deposited sand to within about 40 m of the inundation limit. The thicker part of the deposit contains primarily sand indistinguishable from that found on the beach 3 weeks after the event, but after about 450 m (and roughly coinciding with the decrease in thickness) the tsunami sediment shifts to become more like the underlying paddy soil than the beach sand. Grain sizes within the deposit tend to fine upward and landward, although overall upward fining takes place in two discrete pulses, with an initial section of inverse grading followed by a section of normal grading. The two inversely graded sections are also density graded, with denser grains at the base, and less dense grains at the top. The two normally graded sections show no trends in density. The inversely graded sections show high density sediment to the base and become less dense upward and represents traction carpet flows at the base of the tsunami. These are suggestive of high shear rates in the flow. Because of the grain sorting in the traction carpet, the landward-fining trends usually seen in tsunami deposits are masked, although lateral changes of mean sediment grain size along the transect do show overall landward fining, with more variation as the deposit tapers off. The deposit is also thicker in the more seaward portions than would be produced by tsunamis lacking traction carpets.     

The effect of titanium and phosphorus on ferric/ferrous ratio in silicate melts: an experimental study

The effect of TiO₂ and P₂O₅ on the ferric/ferrous ratio in silicate melts was investigated in model silicate melts at air conditions in the temperature range 1,400–1,550 °C at 1-atm total pressure. The base composition of the anorthite–diopside eutectic composition was modified with 10 wt % Fe₂O₃ and variable amounts of TiO₂ (up to 30 wt %) or P₂O₅ (up to 20 wt %). Some compositions also contained higher SiO₂ concentrations to compare the role of SiO₂, TiO₂, and P₂O₅ on the Fe³⁺/Fe²⁺ ratio. The ferric/ferrous ratio in experimental glasses was analyzed using a wet chemical technique with colorimetric detection of ferrous iron. It is shown that at constant temperature, an increase in SiO₂, TiO₂, and P₂O₅ content results in a decrease in the ferric/ferrous ratio. The effects of TiO₂ and SiO₂ on the Fe³⁺/Fe²⁺ ratio was found to be almost identical. In contrast, adding P₂O₅ was found to decrease ferric/ferrous ratio much more effectively than adding silica. The results were compared with the predictions from the published empirical equations forecasting Fe³⁺/Fe²⁺ ratio. It was demonstrated that the effects of TiO₂ are minor but that the effects of P₂O₅ should be included in models to better describe ferric/ferrous ratio in phosphorus-bearing silicate melts. Based on our observations, the determination of the prevailing fO₂ in magmas from the Fe³⁺/Fe²⁺ ratio in natural glasses using empirical equations published so far is discussed critically.     

Regional sulfate–hematite–sulfide zoning in the auriferous Mariana anticline, Quadrilátero Ferrífero of Minas Gerais, Brazil

The distribution of mineral deposits, characterised as barite deposits, hematite-rich auriferous deposits and auriferous tourmaline–sulfide deposits, displays a regional sulfate–hematite–sulfide zoning along the thrust-delineated limbs of the Mariana anticline, in the south-eastern part of the Quadrilátero Ferrífero of Minas Gerais, Brazil. Cross-cut relationships of barite veins and sulfide lodes indicate that sulfidation occurred in a late-tectonic context, which is here attributed to the collapse of the ～0.6-Ga Brasiliano thrust front. Reconnaissance S-isotopic data from barite and pyrite (Antônio Pereira barite deposit and its adjacent gold deposit, respectively), and arsenopyrite (Passagem de Mariana gold deposit), suggest a new interpretation for the hydrothermal fluid overprint in the Mariana anticline. The Antônio Pereira barite has Δ³³S values that are near zero, constraining the sulfate source to rocks younger than 2.45 Ga. The barite-δ³⁴S values are between +19.6 and +20.8?‰. The Passagem arsenopyrite and tourmaline have Co/Ni ratios that define a positive linear trend with the Antônio Pereira pyrite. The latter has homogenous δ³⁴S values, between +8.8 and +8.9?‰, which are compatible with thermochemical reduction of aqueous sulfate with the S-isotopic composition of the Antônio Pereira barite.     

Ueber Herde elastischer Wellen in isotropen,homogenen Medien

Zusammenfassung 1) Es werden Multipollösungen der skalaren Wellengleichung ² f/t ² – c² div gradf=0 betrachtet. Einerseits kann man solche Lösungen direkt durch Kugelfunktionenn-ter Ordnung ausdrücken, anderseits aus der Einpollösungf=1/p F(t–p/c) durch Differentiation nachn Richtungen erhalten. Es wird der Zusammenhang zwischen den Ergebnissen der beiden Verfahren gezeigt. — 2) Für die Energiedichte und den Energiefluss durch Kugelflächen bei kleinen elastischen Verschiebungen werden Ausdrücke in Kugelkoordinaten angegeben. — 3) Für die Wellengleichung grad div –b ² rot rot werden rotationsfreie Multipollösungen angegeben und Ausdrücke für Energiedichte und Energiefluss hergeleitet. — 4) Das gleiche wird für divergenzfreie Multipollösungen durchgeführt. — 5) Es werden Multipole betrachtet, die weder rotationsfrei noch divergenzfrei sind. Als Spezialfälle werden Multipole mit zeitlich begrenzter und solche mit periodischer Erregung gezeigt, ferner Lösungen der Wellengleichung, die sowohl rotationsfrei wie divergenzfrei sind. — 6) Es wird gezeigt, wie man die elastischen Wellen, die im Sinne vonStokes von einem Herdgebiet endlicher Ausdehnung ausgehen, näherungsweise durch elastische Multipole darstellen kann. — 7) Es wird angedeutet, wie man durch Messung von Komponenten von oder u.s.w. in Punkten im Innern des Mediums die Erregung und Energie von elastischen Multipolen bestimmen kann. Ferner wird auf den Fall hingewiesen, wo ein rotationsfreier Einpol sich im Innern eines Halbraumes befindet und die Messungen an seiner Oberfläche ausgeführt werden.

---

Summary (On foci of elastic waves in isotropic homogeneous media) — 1) Multiplets as solutions of the scalar wave equation ² f/t ² – c² div gradf=0 are considered. Such solutions can be obtained either directly by aid of spherical harmonics of ordern, or by differentiating the single polef=1/p F(t–p/c) with respect ton directions. The relations between the results of those two procedures are shown. — 2) In the case of small elastic displacements , the density of energy and the flow of energy through spherical surfaces are expressed by spherical coordinates. — 3) Multiplets which satisfy the equation of motion =a ² grad div b ² curl curl and the equation curl = 0 are given, and expressions for the density and flow of energy are found. — 4) The same is done with multiplets satisfying the equation of motion and the equation div = 0. — 5) General multiplets which satisfy the equation of motion are treated. As special cases, multiplets with excitation of finite length and multiplets with periodic excitation are considered, furthermore solutions of the equation of motion and of the equations curl = 0 and div = 0 are given. — 6) It is shown how elastic waves whose origin is a region of finite extension in the sense given byStokes, can be approximated by elastic multiplets. — 7) Some indications are given on the problem of how to find the functions of excitation and the energy of an elastic multiplet by measuring components of or etc., at points in the interior of the medium. The same problem is considered in the case of the single elastic pole. = grad 1/p F (t–p/a), if the measurements are made at the surface of an elastic half space.