Surface Geophysical Methods used to Verify the Karst Geological Structure in the Built-up Area: A Case Study of Specific Engineering-Geological Conditions

This article presents a research study of complex limestone karst engineering-geological conditions in the municipality Valaská near Banská Bystrica in Slovakia. The aim of the study is to demonstrate the impossibility of spatial identification of cave spaces using surface geophysical methods due to the specific engineering-geological conditions of a thick surface layer of anthropogenic fill containing highly heterogeneous anthropogenic material. Its maximum thickness is 3 m. Another specificific condition of the study area is its location in the built-up area, due to which the applicability of geophysical methods was limited. The article contains methodological recommendations to be used in analogous geological conditions with karst structures topped with anthropogenic fill, which complicates the identification of cave spaces. The recommended solution herein is the identification of the cave system using underground mapping of the karst and its projection onto the surface for which surface geophysical methods have been combined.     

Seagrass as the main food source of Neaxius acanthus (Thalassinidea: Strahlaxiidae), its burrow associates, and of Corallianassa coutierei (Thalassinidea: Callianassidae)

Burrows of the thalassinidean shrimps Neaxius acanthus and Corallianassa coutierei are striking aspects in tropical seagrass beds of the Spermonde Archipelago, Indonesia. Burrow construction, behaviour, burrow type and associated commensal community were investigated to clarify the ecological role and food requirements of these shrimps and their commensals. Gut content analysis and stable-isotope data were used to unravel the food sources and the trophic interactions among the commensal community.Individuals of Neaxius acanthus were caught on Bone Batang Island. In narrow aquaria filled with sediment they constructed burrows resembling those found in the field. During burrow construction and maintenance only little sediment was brought to the surface, most was sorted and compacted to create a distinct lining. Maintenance work by single shrimps typically took about 5 min, after which the shrimp walked up to the entrance and rested for a similar period of time. There were no differences in behaviour between day and night. Intrasexual encounters inside the burrow were characterised by a high level of aggression and all resulted in one participant being driven out of the burrow. Intersexual encounters led to coexistence with both animals taking turns in burrow maintenance and guarding the entrance. Offered seagrass leaves were pulled underground, cut into pieces and eventually integrated into the lining. Burrows of Corallianassa coutierei resembled a deep U-shape. Chambers branching off halfway down and at the deepest point contained seagrass fragments. All steep parts of the burrow were lined similar to burrows of N. acanthus.No commensals were found associated with Corallianassa coutierei. However, burrows of Neaxius acanthus in the field typically contained a pair of shrimps, up to 8 individuals of the commensal bivalve Barrimysia cumingii and large numbers of gammarid amphipods. Other animals found associated with the burrow were the goby Austrolethops wardi, a palaemonid shrimp species and two species of tube-building polychaetes, one of which was also found as an epibiont on N. acanthus.Stable-isotope and gut content analyses indicate that the diet of Neaxius acanthus, its commensal Austrolethops wardi, and Corallianassa coutierei is mainly derived from detrital seagrass leaves, with a potential contribution of sediment organic matter and seagrass epiphytes. In contrast the isotopic signature of Barrimysia cumingii suggests the presence of symbiotic sulphide metabolism bacteria. This study underlines that, besides their interactions with the surrounding ecosystem, thalassinid shrimp burrows play an important role as a sub-habitat with a unique associated fauna.     

The use of principle component analyses in characterising trace and major elemental distribution in a 55 kyr peat deposit in tropical Australia: Implications to paleoclimate

The Lynch’s Crater peat deposit in NE-Australia is a sensitive environmental archive located in the tropical Southern Hemisphere. This unique deposit illustrates that local and regional changes had a profound effect on the local Australian ecosystem over the past 55 kyr. To obtain a proxy of past climate changes, trace and major element geochemistry analyses were applied to a 13 m peat core from the crater. Principle component analysis (PCA) was used to identify the main factors that control elemental distribution in the peat and to add interpretative strength to the geochemical behavior of selected major and trace elements. For example, Sc, Al, Cu, and Pb were found to be related to increased erosion of the basin soils, and from this, several periods of significant flux from atmospheric input and/or terrigenous run-off were identified. Geochemically mobile elements during rock weathering and pedogenesis, such as Mg, Ca, and Sr helped to identify the peat ombrotrophic-minerotrophic boundary at ∼1.5 m depth and offered important information about fluxes of these nutrients to the mire and their dynamics within the deposit. Arsenic and V comparisons between the peat record (high concentrations in some peat sections) and in local basin rocks (very low concentrations), suggested the presence of a long range, atmospheric dust source early in the formation of the mire. The Lynch’s Crater peat record presents a continuous record of environmental change in tropical Australia and contributes new understanding to geochemical processes in peatlands.     

Provenance of the Bosnian Flysch

Sandwiched between the Adriatic Carbonate Platform and the Dinaride Ophiolite Zone, the Bosnian Flysch forms a c. 3000 m thick, intensely folded stack of Upper Jurassic to Cretaceous mixed carbonate and siliciclastic sediments in the Dinarides. New petrographic, heavy mineral, zircon U/Pb and fission-track data as well as biostratigraphic evidence allow us to reconstruct the palaeogeology of the source areas of the Bosnian Flysch basin in late Mesozoic times. Middle Jurassic intraoceanic subduction of the Neotethys was shortly followed by exhumation of the overriding oceanic plate. Trench sedimentation was controlled by a dual sediment supply from the sub-ophiolitic high-grade metamorphic soles and from the distal continental margin of the Adriatic plate. Following obduction onto Adria, from the Jurassic–Cretaceous transition onwards a vast clastic wedge (Vranduk Formation) was developed in front of the leading edge, fed by continental basement units of Adria that experienced Early Cretaceous synsedimentary cooling, by the overlying ophiolitic thrust sheets and by redeposited elements of coeval Urgonian facies reefs grown on the thrust wedge complex. Following mid-Cretaceous deformation and thermal overprint of the Vranduk Formation, the depozone migrated further towards SW and received increasing amounts of redeposited carbonate detritus released from the Adriatic Carbonate Platform margin (Ugar Formation). Subordinate siliciclastic source components indicate changing source rocks on the upper plate, with ophiolites becoming subordinate. The zone of the continental basement previously affected by the Late Jurassic–Early Cretaceous thermal imprint has been removed; instead, the basement mostly supplied detritus with a wide range of pre-Jurassic cooling ages. However, a c. 80 Ma, largely synsedimentary cooling event is also recorded by the Ugar Formation, that contrasts the predominantly Early Cretaceous cooling of the Adriatic basement and suggests, at least locally, a fast exhumation.     

Factors affecting the Nd3+ (REE3+) luminescence of minerals

In this paper, possibilities and limits of the application of REE³⁺ luminescence (especially the Nd^{3+ 4}F_3/2 → ⁴I_9/2 emission) as structural probe are evaluated. Important factors controlling the Nd³⁺ luminescence signal are discussed, including effects of the crystal-field, crystal orientation, structural state, and temperature. Particular attention was paid to the study of the accessory minerals zircon (ZrSiO₄), xenotime–(Y) (YPO₄), monazite–(Ce) (CePO₄) and their synthetic analogues. Based on these examples we review in short that (1) REE³⁺ luminescence can be used as non-destructive phase identification method, (2) the intensities of certain luminescence bands are strongly influenced by crystal orientation effects, and (3) increased widths of REE³⁺-related emission bands are a strong indicator for structural disorder. We discuss the potential of luminescence spectroscopy, complementary to Raman spectroscopy, for the quantitative estimation of chemical (and potentially also radiation-induced) disorder. For the latter, emissions of Nd³⁺-related centres are found to be promising candidates.     

Garnet reaction rims from the breakdown of Staurolite in polymetamorphic micashists from the Rappold complex, Austroalpine basement, Eastern Alps

In polymetamorphic pelites of the Rappold complex in the Wölz crystalline basement (Eastern Alps) reaction rim garnets at staurolite-quartz interfaces (type I) and single grain garnets along previous staurolite-white mica interfaces (type II) were formed. The garnet reaction rims were formed during the Cretaceous amphibolite facies metamorphic overprint of the pre-existing mineral assemblages comprising garnet, staurolite, and kyanite from an amphibolite facies metamorphic event probably of Variscian age. The newly formed garnet may take the form of reaction rims along the margins of large pre-existing staurolite blasts. The initial growth increments of garnet have low grossular content, and reaction rim growth was controlled by the transfer of Fe, Mg and Mn components from the staurolite-garnet interface to the quartz-garnet interface. Later garnet growth increments have relatively high grossular content due to consumption of matrix plagioclase, which was destabilized by successive pressure increase. The grossular content of newly formed garnet shows systematic increase towards sites where plagioclase breaks down indicating that transport of calcium through the matrix was sluggish. On the basis of reaction microstructures it is demonstrated that the mineral assemblage garnet?+?kyanite?+?biotite?+?paragonite was formed at the conditions of eo-alpine amphibolite facies overprint while staurolite and plagioclase broke down successively with increasing pressure.     

Fe and O isotope composition of meteorite fusion crusts: Possible natural analogues to chondrule formation?

Meteorite fusion crust formation is a brief event in a high‐temperature (2000–12,000 K) and high‐pressure (2–5 MPa) regime. We studied fusion crusts and bulk samples of 10 ordinary chondrite falls and 10 ordinary chondrite finds. The fusion crusts show a typical layering and most contain vesicles. All fusion crusts are enriched in heavy Fe isotopes, with δ⁵⁶Fe values up to +0.35‰ relative to the solar system mean. On average, the δ⁵⁶Fe of fusion crusts from finds is +0.23‰, which is 0.08‰ higher than the average from falls (+0.15‰). Higher δ⁵⁶Fe in fusion crusts of finds correlate with bulk chondrite enrichments in mobile elements such as Ba and Sr. The δ⁵⁶Fe signature of meteorite fusion crusts was produced by two processes (1) evaporation during atmospheric entry and (2) terrestrial weathering. Fusion crusts have either the same or higher δ¹⁸O (0.9–1.5‰) than their host chondrites, and the same is true for Δ¹⁷O. The differences in bulk chondrite and fusion crust oxygen isotope composition are explained by exchange of oxygen between the molten surface of the meteorites with the atmosphere and weathering. Meteorite fusion crust formation is qualitatively similar to conditions of chondrule formation. Therefore, fusion crusts may, at least to some extent, serve as a natural analogue to chondrule formation processes. Meteorite fusion crust and chondrules exhibit a similar extent of Fe isotope fractionation, supporting the idea that the Fe isotope signature of chondrules was established in a high‐pressure environment that prevented large isotope fractionations. The exchange of O between a chondrule melt and an ¹⁶O‐poor nebula as the cause for the observed nonmass dependent O isotope compositions in chondrules is supported by the same process, although to a much lower extent, in meteorite fusion crusts.     

40Ar39Ar ages of Allende

KAr and/or ⁴⁰Ar³⁹Ar plateau ages of Allende samples—whole rock, matrix, chondrules, white inclusions–range from 3.8 AE for matrix of ?5 AE for some white inclusions, but cluster strongly near 4.53 AE. This age marks the dominant KAr resetting of Allende materials. Age spectra show disturbances due to ³⁹Ar recoil or some other argon redistribution processes. Possible explanations for the apparent presolar ages (>4.6 AE) include: ?20% loss of ³⁹Ar; ?40% loss of ⁴⁰K ～3.8 AE ago with no loss of ⁴⁰Arl trapped argon of unique ⁴⁰Ar/³⁶Ar isotopic composition; admixture of “very old” presolar grains.     

Effect of irregular structural configuration on floor acceleration demand in hill‐side buildings

A suite of reinforced‐concrete frame buildings located on hill sides, with 2 different structural configurations, viz step‐back and split‐foundation, are analyzed to study their floor response. Both step‐back and split‐foundation structural configurations lead to torsional effects in the direction across the slope due to the presence of shorter columns on the uphill side. Peak floor acceleration and floor response spectra are obtained at each storey's center of rigidity and at both its stiff and flexible edges. As reported in previous studies as well, it is observed that the floor response spectra are better correlated with the ground response spectrum. Therefore, the floor spectral amplification functions are obtained as the ratio of spectral ordinates at different floor levels to the one at the ground level. Peaks are observed in the spectral amplification functions corresponding to the first 2 modes in the upper portion of the hill‐side buildings, whereas a single peak corresponding to a specific kth mode of vibration is observed on the floors below the uppermost foundation level. Based on the numerical study for the step‐back and split‐foundation hill‐side buildings, simple floor spectral amplification functions are proposed and validated. The proposed spectral amplification functions take into account both the buildings' plan and elevation irregularities and can be used for seismic design of acceleration‐sensitive nonstructural components, given that the supporting structure's dynamic characteristics, torsional rotation, ground‐motion response spectrum, and location of the nonstructural components within the supporting structure are known, because current code models are actually not applicable to hill‐side buildings.     

Continuous real‐time analysis of the isotopic composition of precipitation during tropical rain events: Insights into tropical convection

To investigate stable isotopic variability of precipitation in Singapore, we continuously analysed the δ‐value of individual rain events from November 2014 to August 2017 using an online system composed of a diffusion sampler coupled to Cavity Ring‐Down Spectrometer. Over this period, the average value (δ¹⁸O_Avg), the lowest value (δ¹⁸O_Low), and the initial value (δ¹⁸O_Init) varied significantly, ranging from ?0.45 to ?15.54‰, ?0.9 to ?17.65‰, and 0 to ?13.13‰, respectively. All 3 values share similar variability, and events with low δ¹⁸O_Low and δ¹⁸O_Avg values have low δ¹⁸O_Init value. Individual events have limited intraevent variability in δ‐value (Δδ) with the majority having a Δδ below 4‰. Correlation of δ¹⁸O_Low and δ¹⁸O_Avg with δ¹⁸O_Init is much higher than that with Δδ, suggesting that convective activities prior to events have more control over δ‐value than on‐site convective activities. The d‐excess of events also varies considerably in response to the seasonal variation in moisture sources. A 2‐month running mean analysis of δ¹⁸O reveals clear seasonal and interannual variability. Seasonal variability is associated with the meridional movement of the Intertropical Convergence Zone and evolution of the Asian monsoon. El Niño–Southern Oscillation is a likely driver of interannual variability. During 2015–2016, the strongest El Niño year in recorded history, the majority of events have a δ¹⁸O value higher than the weighted average δ¹⁸O of daily precipitation. δ¹⁸O shows a positive correlation with outgoing longwave radiation in the western Pacific and the Asian monsoon region, and also with Oceanic Niño Index. During El Niño, the convection centre shifts eastward to the central/eastern Pacific, weakening convective activities in Southeast Asia. Our study shows that precipitation δ‐value contains information about El Niño–Southern Oscillation and the Intertropical Convergence Zone, which has a significant implication for the interpretation of water isotope data and understanding of hydrological processes in tropical regions.