The biomass of macro- and interstitial fauna on clean and wrack-covered beaches in Western Australia

The benthic faunal spectrum including bacteria, protozoans, meiofauna, wrack epifauna and macrofauna, was quantitatively surveyed on two modally reflective, moderate energy, Western Australian beaches. The more exposed beach had coarser sand, no intertidal macrofauna and a poor interstitial fauna. The less exposed beach had a large deposit of wrack totalling 161 kg m^?1 dry mass concentrated on the lower shore. The amphipod Allorchestes compressa was abundant in the fresh wrack comprising most of the macrofauna. There were also fairly abundant small epifauna on the wrack. Dry biomass of macrofauna, epifauna, meiofauna, protozoans and bacteria was 0, 0, 15, 4 and 180 g m^?1 on the more exposed beach and 160, 3, 112, 9 and 901 g m^?1 on the less exposed beach with wrack. On the latter beach there was an inverse correlation between meiofaunal densities and the densities of protozoans and bacteria, suggesting grazing by the former on the latter. On both beaches meiofauna was concentrated in the mid- to upper beach, protozoans near the surface and bacteria in the mid- to lower beach. It is estimated that bacteria are responsible for most of the secondary production on both beaches.     

Ionic medium effects in sea water — A comparison of acidity constants of carbonic acid and boric acid in sodium chloride and synthetic sea water

It is shown that the values of pK_1C and pK_2C for carbonic acid, pK_B for boric acid and the ionic product of water, pK_w, in sea water may be explained on the basis of their determination in 0.7 M_w sodium chloride and the formation of the following ion-pairs: NaSO₄^?, MgSO₄, CaSO₄, MgCO₃, CaCO₃, MgHCO₃⁺, CaHCO₃⁺, MgOH⁺, HSO₄^?, MgB(OH)₄⁺ and CaB(OH)₄⁺. On the whole the calculated stability constants are lower than those given by Garrels and Thompson (1962).     

Petrogenesis of anomalous K-enriched MORB from the Southwest Indian Ridge: 11°53′E to 14°38′E

Glassy pillow basalts with unusual geochemical characteristics for mid-ocean ridge basalt (MORB) have been dredge sampled from the Southwest Indian Ridge between 12 and 15°E during Leg ANT IV/4 of the F.S. POLARSTERN. Lavas from 4 of 6 dredges are moderately nepheline normative, highly K-enriched (0.5–1.77 wt% K₂O) alkali basalts and hawaiites. Mg-numbers indicate that many of the lavas are fairly primitive (Mg No.=63–67), yet show extreme enrichment in incompatible elements; e.g. Nb (24–60 ppm), Ba (170–470 ppm) and Sr (258–460 ppm). Incompatible-element ratios such as Zr/Nb (3–5) and Y/Nb (0.46–1.1) are extremely low even for E-type (enriched) MORB, whereas (La/Yb)_n ratios are particularly high (3.4–7.8). ⁸⁷Sr/⁸⁶Sr (0.70290–0.70368), ¹⁴³Nd/¹⁴⁴Nd (0.51302–0.51284) and ²⁰⁶Pb/²⁰⁴Pb (18.708–19.564) isotopic ratios further indicate the geochemically enriched nature of these lavas, which range from the compositional field for depleted N-type (normal) MORB towards the composition of Bouvet Island lavas. Mutually correlated incompatible-element and Sr-, Nd- and Pb-isotopic ratios allow a fairly well constrained model to be developed for the petrogenesis of these unusually alkalic mid-ocean ridge lavas. The alkalic nature and degree of enrichment in incompatible elements is ascribed to particularly low degrees of partial melting (3–5 wt%), at greater than usual depth, of a source region that has experienced prior geochemical enrichment (by veining) related to the upwelling Bouvet mantle plume. To account for the observed compositional variations, a model is proposed whereby mixing between partial melts derived from these geochemically enriched silicate veins, and an incipient to low percentage (±2%) melt from the surrounding geochemically depleted suboceanic asthenosphere occurs as a consequence of increasing degree of melting with adiabatic upwelling. Eruption of these alkalic lavas in this spreading ridge environment is attributed to a temporary hiatus in tholeiitic volcanism and associated spreading along this section of the Southwest Indian Ridge, related to readjustment of spreading direction to a more stable plate geometry.     

Paleoclimate reconstruction based on the timing of speleothem growth and oxygen and carbon isotope composition in a cave located in the rain shadow in Israel

High-resolution ²³⁰Th/²³⁴U ages and δ¹⁸O and δ¹³C compositions of speleothems in Ma’ale Efrayim Cave located to the east of the central mountain ridge of Israel enable us to examine the nature of the rain shadow aridity during glacial and interglacial intervals. Speleothem growth occurred during marine glacial isotopic periods, with no growth during the two last marine isotope interglacial intervals and during the peak of the Last Glacial Maximum. This contrasts with speleothem growth in caves located on the western flank of the central mountain ridge, in the Eastern Mediterranean semiarid climatic zone, which continued throughout the last 240,000 yr. Thus, during glacial periods water reached both sides of the central mountain ridge. A comparison of the present-day rain and cave water isotopic compositions and amounts at the Ma’ale Efrayim Cave site with those on the western flank shows that evaporation and higher temperatures on the eastern flank are major influences on isotopic composition and the lack of rainfall. The δ¹⁸O and δ¹³C profiles of the speleothems deposited between 67,000 and 25,000 yr B.P. match the general trends of the isotopic profiles of Soreq Cave speleothems, suggesting a similar source (eastern Mediterranean Sea) and similar climatic conditions. Thus, during glacial periods the desert boundary effectively migrated further south or east from its present-day location on the eastern flank, whereas interglacial periods appear to have been similar to the present, with the desert boundary at the same position. The decrease in overall temperature and a consequent reduction in the evaporation to precipitation ratios on the eastern flank are viewed as the major factors controlling the decay of the rain shadow effect during glacial periods.     

A Reflection on Mg, Cd, Ca, Li and Si Isotopic Measurements and Related Reference Materials

This contribution aims to report the reflections we had with the scientific community during two international workshops on reference materials for stable isotopes in Davos (2002) and Nice (2003). After evaluating the isotopic homogeneity of some existing reference materials, based on either certificates, literature data or specific inter-laboratory rounds, we confirm these as primary reference materials or propose new ones relative to which stable isotope compositions should be reported. We propose DSM-3 for Mg, NIST SRM 915a for Ca, L-SVEC for Li and NBS28 for Si. Cadmium does not yet have a well identified delta zero material, although three commercial mono-elemental Cd solutions have yielded the same isotopic composition relative to one another. In order to scale the linearity of any mass spectrometer, some secondary reference materials are also proposed: Cambridge-1 solution for Mg, the "Münster-Cd" and JEPPIM Cd solutions for Cd and the "Big Batch" silicate for Si. The team from Nancy propose to prepare a mixed spike solution for Li isotopes. Well-characterised natural samples such as ocean or continental waters, diatoms, sponges, rocks and minerals are needed to validate the entire analytical procedure, particularly to take into account the effect of sample mineralisation and of chemical manipulations for elemental separation prior to analysis.     

Trace element geochemistry of CR chondrite metal

We report trace element analyses by laser ablation inductively coupled plasma mass spectrometry (LA‐ICP‐MS) of metal grains from nine different CR chondrites, distinguishing grains from chondrule interior (“interior grains”), chondrule surficial shells (“margin grains”), and the matrix (“isolated grains”). Save for a few anomalous grains, Ni‐normalized trace element patterns are similar for all three petrographic settings, with largely unfractionated refractory siderophile elements and depleted volatile Au, Cu, Ag, S. All three types of grains are interpreted to derive from a common precursor approximated by the least‐melted, fine‐grained objects in CR chondrites. This also excludes recondensation of metal vapor as the origin of the bulk of margin grains. The metal precursors were presumably formed by incomplete condensation, with evidence for high‐temperature isolation of refractory platinum‐group‐element (PGE)‐rich condensates before mixing with lower temperature PGE‐depleted condensates. The rounded shape of the Ni‐rich, interior grains shows that they were molten and that they equilibrated with silicates upon slow cooling (1–100 K h^?1), largely by oxidation/evaporation of Fe, hence their high Pd content, for example. We propose that Ni‐poorer, amoeboid margin grains, often included in the pyroxene‐rich periphery common to type I chondrules, result from less intense processing of a rim accreted onto the chondrule subsequent to the melting event recorded by the interior grains. This means either that there were two separate heating events, which formed olivine/interior grains and pyroxene/margin grains, respectively, between which dust was accreted around the chondrule, or that there was a single high‐temperature event, of which the chondrule margin records a late “quenching phase,” in which case dust accreted onto chondrules while they were molten. In the latter case, high dust concentrations in the chondrule‐forming region (at least three orders of magnitude above minimum mass solar nebula models) are indicated.     

Capture effects in carbonaceous material: A Stardust analogue study

Abstract— It is reasonable to expect that cometary samples returned to Earth by the Stardust space probe have been altered to some degree during capture in aerogel at 6.1 km/s. In order to help interpret the measured structure of these particles with respect to their original cometary nature, a series of coal samples of known structure and chemical composition was fired into aerogel at Stardust capture velocity. This portion of the study analyzed the surfaces of aerogel‐embedded particles using Raman spectroscopy. Results show that particle surfaces are largely homogenized during capture regardless of metamorphic grade or chemical composition, apparently to include a devolatilization step during capture processing. This provides a possible mechanism for alteration of some aliphatic compound‐rich phases through devolatilization of cometary carbonaceous material followed by re‐condensation within the particle. Results also show that the possibility of alteration must be considered for any particular Stardust grain, as examples of both graphitization and amorphization are found in the coal samples. It is evident that Raman G band (～1580 cm^?1) parameters provide a means of characterizing Stardust carbonaceous material to include identifying those grains which have been subjected to significant capture alteration.     

Saltwater Upconing Due to Cyclic Pumping by Horizontal Wells in Freshwater Lenses

This article deals with the quantification of saltwater upconing below horizontal wells in freshwater lenses using analytical solutions as a computationally fast alternative to numerical simulations. Comparisons between analytical calculations and numerical simulations are presented regarding three aspects: (1) cyclic pumping; (2) dispersion; and (3) finite horizontal wells in a finite domain (a freshwater lens). Various hydrogeological conditions and pumping regimes within a dry half year are considered. The results show that the influence of elastic and phreatic storage (which are not taken into account in the analytical solutions) on the upconing of the interface is minimal. Furthermore, the analytical calculations based on the interface approach compare well with numerical simulations as long as the dimensionless interface upconing is below 1/3, which is in line with previous studies on steady pumping. Superimposing an analytical solution for mixing by dispersion below the well over an analytical solution based on the interface approach is appropriate in case the vertical flow velocity around the interface is nearly constant but should not be used for estimating the salinity of the pumped groundwater. The analytical calculations of interface upconing below a finite horizontal well compare well with the numerical simulations in case the distance between the horizontal well and the initial interface does not vary significantly along the well and in case the natural fluctuation of the freshwater lens is small. In order to maintain a low level of salinity in the well during a dry half year, the dimensionless analytically calculated interface upconing should stay below 0.25.     

Green space planning and land use: An assessment of urban regional and green structure planning in Greater Copenhagen

Geografisk Tidsskrift, Danish Journal of Geography 106(2):7–20, 2006

In its Regional Plan of 2005, The Greater Copenhagen Authority (abbreviated as “HUR” in Danish) places special emphasis on the future recreational values associated with the regional green structure. In this paper, the development of the urban green structure in Greater Copenhagen is elaborated upon, focusing on land use changes and the effectiveness of regionally coordinated planning measures. EU MOLAND data are used to analyse the development of the region's green structure during the period 1954 to 1998. Analysis of two “green wedges” within the green structure illustrates that the development of the green recreational areas is the result of both formal and more informal planning initiatives. Development has shown equal phases that correspond to the applied regional planning measures and the general economic conditions. However, local preferences in the involved municipalities likewise have played an important role and have resulted in different urbanisation pressure within the two wedges. Land use has transformed from an agricultural to a primarily recreational landscape. In some areas, however, urbanisation pressure has resulted in residential and green industrial areas instead of the planned recreational land use. Based on its historical development it is concluded that future preservation and development of the green structure in Greater Copenhagen requires regional planning measures to be incorporated into municipal plans. In this way the increasingly independent municipalities will comply to objectives of the Regional Plan 2005.