Formulation of the Caspian Sea’s legal regime using a joint zone approach

The legal regime of the Caspian Sea has been determined under Treaties 1921 and 1940 by and between Iran and former Soviet Union. In fact, we are neither to explain it nor to determine. As understood from the provisions therein, the exploitation and use of the Caspian Sea by both countries are based on the Condominium. However, there is a 10-nautical mile strip as exclusive fishing areas which have been allocated to the states under the 1940 treaty. It means that Soviet Union and Iran may benefit the marine livings resources out of that strip on an equal manner. This right also includes the seabed and underlying bed. So, the legal regime of this sea may be based on a 10-nautical mile exclusive region for all five states and the remaining part as common and joint area under an agreement until an explaining and supervising organization is established to exploit and supervise over living and non-livings resources.     

Impact of Reservoir Permeability,Permeability Anisotropy and Designed Injection Rate on CO2 Gas Behavior in the Shallow Saline Aquifer at the CaMI Field Research Station,Brooks, Alberta

Natural Resources Research - Carbon capture and storage is part of Canada’s climate change action plan to reduce greenhouse gas emissions. The Containment and Monitoring Institute Field...     

Three-dimensional discontinuous deformation analysis (3-D DDA) using a new contact resolution algorithm

This paper presents a new contact calculating algorithm for contacts between two polyhedra with planar boundaries in the three-dimensional discontinuous deformation analysis (3-D DDA). In this algorithm, all six type contacts in 3-D (vertex-to-face, vertex-to-edge, vertex-to-vertex, face-to-face, edge-to-edge, and edge-to-face) are simply transformed into the form of point-to-face contacts. The presented algorithm is a simple and efficient method and it can be easily coded into a computer program. In this paper, formulations of normal contact, shear contact and frictional force submatrices based on the new method are derived and the algorithm has been programmed in VC⁺⁺. Examples are provided to demonstrate the new contact rule between two blocks.     

Direct CPT and CPTu methods for determining bearing capacity of helical piles

Helical piles are structural deep foundation elements, which can be categorized as torque-driven piles without any limitations to implement in marine situations. Different methods are used to predict the axial capacity of helical piles, such as static analysis, but have some limitation for this type of piles on marine conditions. In situ testing methods as supplement of static analysis have been rarely used for helical piles. In geotechnical engineering practice, the most common in situ tests particularly applicable for coastal or offshore site investigation are cone penetration test (CPT) and piezocone penetration test (CPTu). The CPT is simple, repeatable, and prepares the continuous records of soil layers. In this paper, a data bank has been compiled by collecting the results of static pile load tests on thirty-seven helical piles in ten different sites including CPT or CPTu data. Axial capacities of thirty-seven helical piles in different sites were predicted by direct CPT methods and static analysis. Accuracy estimation of ten direct CPT methods to predict the axial capacity of helical piles was investigated in this study. Comparisons have been made among predicted values and measured capacity from the pile load tests. Results indicated that the recently developed methods such as NGI-05 (2005), ICP-05 (2005), and UWA-05 (2005) predicted axial capacity of helical piles more accurately than the other methods such as Meyerhof (1983), Schmertmann (1978), Dutch (1979), LCPC (1982), or Unicone (1997). However, more investigations are required to establish better correlation between CPT data and axial capacity of helical piles.     

Analysis of soil nail walls performance - Case study

This study surveys the performance of temporary soil nail walls with a maximum height of 29.3 m in the Yas project, located in Tehran. Some numerical models, with various modelling approaches, were developed using finite element software and the proper modelling approaches were specified and verified.The modelling results were analysed and compared with the in situ monitored data. The results demonstrate the model’s horizontal deformations are generally greater than the in situ monitored values. To decrease the differences between models and monitored results, the effect of variations of the soil parameters had been surveyed and the limits of needed variations were specified.     

The transverse dynamics of flow in a tidal channel within a greater strait

Vessel-mounted ADCP measurements were conducted to describe the transverse structure of flow between the two headland tips in Khuran Channel, south of Iran (26° 45′ N), where the highest tidal velocities in spring tides were ~?1.8 m/s. Current profiles were obtained using a 614.4 kHz TRDI WorkHorse Broadband ADCP over nine repetitions of three cross-channel transects during one semidiurnal tidal cycle. The 2.2-km-long transects ran north/south across the channel. A least-square fit to semidiurnal, quarter-diurnal, and sixth diurnal harmonics was used to separate the tidal signals from the observed flow. Spatial gradients showed that the greatest lateral shears and convergences were found over the northern channel and near the northern headland tip due to very sharp bathymetric changes in this area. Contrary to the historical assumption, the across-channel momentum balance in the Khuran Channel was ageostrophic. The current study represents one of the few examples reported where the lateral friction influences the across-channel momentum balance.     

Impacts of Depositional Facies and Diagenesis on Reservoir Quality: A Case Study from the Rudist-bearing Sarvak Formation, Abadan Plain, SW Iran

An integrated geological-petrophysical analysis of the rudist-bearing sequence of the Cretaceous Sarvak Formation is given one giant oilfield, and provides an improved understanding of this main reservoir in the Abadan Plain, in the Zagros Basin, SW Iran. The main objective of this study is to evaluate reservoir potential of the Sarvak Formation, and then to utilize the calibrated well log signature to correlate reservoir potential in un-cored wells. Eight main facies are recognized and categori...     

Tensionless–frictionless interaction of flexible annular foundation with a transversely isotropic multi‐layered half‐space

A transversely isotropic multi‐layered half‐space, with axis of material symmetry perpendicular to the free surface, supports a flexible either annular or solid circle foundation. The contact area of the foundation and the half‐space is considered to be both frictionless and tensionless. The foundation is assumed to be affected by a vertical static axisymmetric load. Detailed analysis of the interaction of these two systems with different thickness of layers is the target of this paper. With the use of ring load Green's functions for both the foundation and the continuum half‐space, an integral equation accompanied with some inequalities is introduced to model the complex BVP. With the incorporation of ring‐shape FEM, we are capable of capturing both regular and singular solution smoothly. The validity of the combination of the analytical and numerical method is proved with comparing the results of this paper with a number of benchmark cases of both linear and nonlinear interaction of circular and annular foundation with half‐space. Some new illustrations are presented to portray the aspect of the anisotropy and layering of the half‐space. Copyright © 2014 John Wiley & Sons, Ltd.     

Applying disk-based discontinuous deformation analysis (DDA) to simulate Donghekou landslide triggered by the Wenchuan earthquake

In this paper, for the first time, disk-based discontinuous deformation analysis (DDA) is applied to simulate a real landslide triggered by an earthquake. For this purpose, the kinematic behaviour of the Donghekou landslide triggered by the Wenchuan earthquake is simulated and the results obtained using disk-based DDA are compared with actual data. The comparisons show that there is a good agreement between the results obtained using disk-based DDA and observed data. The simulation results provided an understanding of the failure behaviour and temporal evolution of the landslide. This study shows that disk-based DDA is a practical numerical tool that can be used to simulate the post-failure behaviour of landslides triggered by an earthquake.