Infrared polarization of venus: Its periodic fluctuations and evidence for thin haze

Infrared polarimetry of Venus over the phase angles from 18 to 171° has been made extending previous measurements (S. Sato, K. Kawara, Y. Kobayashi, H. Okuda, K. Noguchi, T. Mukai, and S. Mukai (1980). Icarus43, 288) in both wavelength λ and phase angle θ. The results of polarization measurements at 2.25 μm ? λ ? 5.0 μm are (i) small positive and negative values at K(2.25 μm), (ii) a remarkable variation with λ in the CVF(2.2?4.2μm) filter region, (iii) a nearly smooth curve as a function of θ having a peak value of ～36% at θ ～ 90° at both 3.6 μm and L′(3.8 μm), and (iv) a decrease with increasing field of view at M(5.0 μm) due to the contamination of thermal emission from the dark crescent. Furthermore, at 3.6 μm and L′(3.8 μm), (v) higher values at the poles than at the equator and (vi) 4.5- to 5.9-day periodic fluctuations are also found. From a comparison with model calculations, the results confirm the existence of a thin haze layer consisting of submicron-size particles above the main clouds of Venus; e.g., its optical thickness is about 0.1 at λ ～ 0.94 μm. In addition, result (vi) could be explained by a variation of the optical thickness of the haze layer or that of the brightness temperature of the main clouds.     

Real-time difference imaging analysis of MOA Galactic bulge observations during 2000

We describe observations carried out by the MOA group of the Galactic bulge during 2000 that were designed to detect efficiently gravitational microlensing of faint stars in which the magnification is high and/or of short duration. These events are particularly useful for studies of extrasolar planets and faint stars. Approximately 17 deg² were monitored at a sampling rate of up to six times per night. The images were analysed in real time using a difference imaging technique. 20 microlensing candidates were detected, of which eight were alerted to the microlensing community whilst in progress. Approximately half of the candidates had high magnifications (≳10), at least one had very high magnification (≳50), and one exhibited a clear parallax effect. The details of these events are reported here, together with details of the on-line difference imaging technique. Some nova-like events were also observed and these are described, together with one asteroid.     

3-D internal architecture of methane hydrate-bearing turbidite channels in the eastern Nankai Trough, Japan

The reservoir architecture of methane hydrate (MH) bearing turbidite channels in the eastern Nankai Trough, offshore Japan is evaluated using a combination of 3-D seismic and well data. On the 3-D seismic section, the MH-bearing turbidite channels correspond to complex patterns of strong seismic reflectors, which show the 3-D internal architecture of the channel complex. A seismic-sequence stratigraphic analysis reveals that the channel complex can be roughly classified into three different stages of depositional sequence (upper, middle, and lower). Each depositional sequence results in a different depositional system that primarily controls the reservoir architecture of the turbidite channels. To construct a 3-D facies model, the stacking patterns of the turbidite channels are interpreted, and the reservoir heterogeneities of MH-bearing sediments are discussed. The identified channels at the upper sequence around the β1 well exhibit low-sinuosity channels consisting of various channel widths that range from tens to several hundreds of meters. Paleo-current flow directions of the turbidite channels are typically oriented along the north-northeast-to-south-southwest direction. High-amplitude patterns were identified above the channels along the north-to-south and north-northeast-to-south-southeast directions. These roughly coincide with the paleo-current flow of the turbidite channels. An interval velocity using high-density velocity analysis shows that velocity anomalies (>2000 m/s) are found on the northeastern side of the turbidite channels. The depositional stage of the northeastern side of the turbidite channels exhibits slightly older sediment stages than the depositional stages of the remaining channels. Hence, the velocity anomalies of the northeastern side of the channels are related to the different stages of sediment supply, and this may lead to the different reservoir architectures of the turbidite channels.     

Re-Os isotope systematics and fractionation of siderophile elements in metal phases from CBa chondrites

We report Os isotope compositions of metal grains in two CB_a chondrites (Bencubbin and Gujba) determined using a micromilling sampling coupled with thermal ionization mass spectrometry, together with the abundances of major and trace siderophile elements obtained by electron probe microanalysis and femtosecond laser ablation inductively coupled plasma–mass spectrometry. The CB_a metal grains presented ¹⁸⁷Os/¹⁸⁸Os ratios akin to carbonaceous chondrites with limited variations (0.1257–0.1270). Most of the CB_a metal grains were scattered along a ¹⁸⁷Re-¹⁸⁷Os reference isochron of IIIAB iron meteorites, indicating that the CB_a metals experienced limited Re-Os fractionation at the time of their formation. The Re/Os ratios of sampling spots for the CB_a metals, recast from the observed ¹⁸⁷Os/¹⁸⁸Os ratios, had a positive correlation with their Os/Ir ratios. In addition, the metal grains showed a positive correlation in a Pd/Fe versus Ni/Fe diagram. These correlations suggest that the CB_a metal grains have formed via equilibrium condensation or evaporation from a gaseous reservoir at ~10⁻⁴ bar with enhanced metal abundances. Compared to the Bencubbin metals, the Gujba metals are characterized by having systematically lower Pd/Fe and Ni/Fe ratios that span subchondritic values. Such a difference was most likely induced by the compositionally heterogeneous impact plume from which the metals were condensed.     

中国内陆高原正极性雷电的观测实验研究

叙述了１９９７年夏季中日两国科学家在甘肃平凉地区合作进行的有关正极性雷电的综合观测实验情况,包括地布局,所采用的技术手 取得的主要结果。实验中采用人工引发雷电技术并取得了两次成功,其中一次是利用“空中解发”方式,即火箭拖带的细钢丝下端不直接接地,而是通过一段绝缘尼龙线与接地的另一段细钢丝相连。用这种方式可以更真实地再现自然雷电的初始过程。实验中观测到了空中导线两端先导的双向传输现象;电流、电场变化     

Flux determination over a smooth surface under strongly unstable conditions

Careful micrometeorological measurements on an empty parking lot allowed determination of the surface fluxes of sensible heatH and of momentum by applying profile equations derived from Monin-Obukhov similarity theory with two sets of the stability correction function for momentum _m and sensible heat _h . These fluxes were compared with reference values ofH independently determined by means of an eddy correlation technique. In general, better agreement was found betweenH values derived from profiles with the stability functions of Brutsaert (1992) and referenceH values, than when the Businger-Dyer functions were used to deriveH. The disagreement in the latter comparison was especially serious under strongly unstable conditions, with the value ofy=–z/L (wherez is the height andL is the Obukhov length) larger than 10. A closer look at the procedure for calculatingH from the profiles revealed that the large differences between theH values derived with these two different versions of the stability correction functions were caused by the small differences of the _h values, and not by the larger differences of the _m values. This result stems from the strong sensitivity of the resultingH values on the choice of _h .     

Crustal structure in and around the region of the 1995 Kobe Earthquake deduced from a wide-angle and refraction seismic exploration

Abstract The 1995 Kobe (Hyogo-ken Nanbu) earthquake (M_JMA 7.2, M_w 6.9) occurred on Jan. 17, 1995, at a depth of 17 km, beneath the areas of southern part of Hyogo prefecture and Awaji Island. To investigate P-wave velocity distribution and seismological characteristics in the aftershock area of this great earthquake, a wide-angle and refraction seismic exploration was carried out by the Research Group for Explosion Seismology (RGES) . The profile including 6 shot points and 205 observations was 135 km in length, extending from Keihoku, Northern Kyoto prefecture, through Kobe, to Seidan on Awaji Island. The charge of each shot was 350–700 kg. The P-wave velocity structure model showed a complicated sedimentary layer which is shallower than 2.5 km, a 2.5 km-thick basement layer whose velocity is 5.5 km/s, overlying the crystalline upper crust, and the boundary between the upper and lower crust.
Almost all aftershock hypocenters were located in the upper crust. However, the structure model suggests that the hypocenters of the main shock and some aftershock clusters were situated deeper than the boundary between the upper and lower crust. We found that the P-velocity in the upper crust beneath the northern part of Awaji Island is 5.64 km/s which is 3% lower than that of the surrounding area. The low-velocity zone coincides with the region where the high stress moment release was observed.     

Effects of riverbed incision on the hydrology of the Vietnamese Mekong Delta

The hydrogeomorphology of the Vietnamese Mekong Delta (VMD) has been significantly altered by natural and anthropogenic drivers. In this study, the spatiotemporal changes of the flow regime were examined by analysing the long-term daily, monthly, annual and extreme discharges and water levels from 1980 to 2018, supported by further investigation of the long-term annual sediment load (from the 1960s to 2015), river bathymetric data (in 1998, 2014 and 2017) and daily salinity concentration (from the 1990s to 2015) using various statistical methods and a coupled numerical model. Then, the effects of riverbed incision on the hydrology were investigated. The results show that the dry season discharge (i.e., in March–June) of the Tien River increased by up to 23% from the predam period (1980–1992) to the postdam period (1993–2018) but that the dry season water level at My Thuan decreased by up to −46%. The annual mean and monthly water levels in June at Tan Chau and in January and June–October at My Thuan in the Tien River decreased statistically, even though the respective discharges increased significantly. These decreased water levels instead of the increased discharges were attributed to the accelerated riverbed incision upstream from My Thuan, which increased by more than three times, from a mean rate of −0.16 m/year (−16.7 Mm³/year) in 1998–2014 to −0.5 m/year (−52.5 Mm³/year) in 2014–2017. This accelerated riverbed incision was likely caused by the reduction in the sediment load of the VMD (from 166.7 Mt/year in the predam period to 57.6 Mt/year in the postdam period) and increase in sand mining (from 3.9 Mm³ in 2012 to 13.43 Mm³ in 2018). Collectively, the decreased dry season water level in the Tien River is likely one of the main causes of the enhanced salinity intrusion.     

Gold Mineralization and Occurrence of Sinter in the Hoshino Area, Fukuoka Prefecture, Japan

Abstract. Several epithermal gold deposits occur in the Hoshino area, which is located in the western end of the late Cenozoic Hohi volcanic zone, north‐central Kyushu, Japan. The area is characterized by intermediate to felsic extrusive rocks of Pliocene age. In the Hoshino area, the shallow manifestation of the hydrothermal activity is exposed on the surface. Several outcrops of sinter are still preserved on the top of hydro thermally altered volcanic rocks, and high‐grade gold‐bearing quartz veins occur on the surface at lower levels. The hydrothermal alteration resulted into well‐developed alteration zones. The zonal alteration pattern, primarily of near‐neutral pH type, is characterized by the outer smectite zone of a lower temperature, and the inner mixed layer minerals zone of a higher temperature. Quartz vein‐related or fracture‐controlled alteration, is represented by the occurrence of interstratified illite/smectite and K‐feldspar, suggesting a potassium‐enriched alteration. The mineralization in the Hoshino area is recognized on the surface by the occurrence of gold‐bearing quartz veins distributed mainly in the mixed layer minerals zone. The fracture system related to the gold mineralization is mainly characterized by NW‐SE trend. The alteration pattern and the mineralogical composition of the veins suggest that the mineralizing fluids had near‐neutral pH and the mineralization is of low‐sulfidation‐type. Fluid inclusion data and textures observed in quartz veins indicate that gold precipitated during boiling. The chemical composition of quartz veins shows that high‐grade gold‐bearing quartz veins are characterized by higher content of Al₂O₃, K₂O and Rb. Several outcrops of silica‐sinters are distributed on the top of the mixed layer minerals zone. Although their structures are not very well preserved, because of later silicification, the Hoshino sinters still show characteristic textures identical to those observed in modern sinters, such as the presence of plant fossil incorporated into the sinters, the strongly developed depositional laminations and the columnar structures perpendicular to the depositional surfaces. Quartz is the only silica mineral constituting the Hoshino sinters presently. The conversion of amorphous silica into quartz was probably governed by higher temperatures resulting from later hydrothermal activity. This later hydrothermal activity is reflected by the intense silicification affecting mainly the lower parts of the sinters and also by the presence of quartz veins cutting the sinters. The distribution of sinters in the Hoshino area is very significant. The presence beneath the sinters of concealed high‐grade gold‐bearing quartz veins should be highly considered and exploration work is strongly suggested.