Phytoplankton communities in the Bering Sea and adjacent seas

Vertical distribution of phytoplankton in early warming season in the eastern Bering Sea and adjacent sea areas was investigated. In the surface layer which was under the influence of newly melted sea ice in the shelf water region of the Bering Sea in May, remarkably dense populations ofThalassiosira hyalina andT. nordenskiöldii and relatively large populations ofFragilaria andNavicula occupied large part of phytoplankton community. In June, although theThalassiosira populations sunk into the bottom layer and withered, a certain part of theFragilaria-Navicula populations was still suspended in subsurface layer. Thus,Fragilaria-Navicula were the leading components of the June community in the shelf region.In the Bering Basin region, no dense phytoplankton populations were developed until a shallow thermocline was established. In June when the shallow thermocline developed near shelf edge,Thalassiosira decipiens burst out. As the shallow thermocline extended from near shelf to central part of the Basin region with surface warming, the areas of blooming also shifted from near shelf to the central part.Contribution No. 73 from the Research Institute of North Pacific Fisheries, Hokkaido University.     

Temporal change of clustered distribution of planktonic ciliates in Toyama Bay in summers of 1989 and 1990

Temporal change of clustered distribution in vertical profiles of three nutritional groups of planktonic ciliates, e.g. heterotrophic naked ciliates, mixotrophic naked ciliates and heterotrophic loricated ciliates, was investigated by following a drifting buoy in Toyama Bay on the Japan Sea coast of central Japan in summers of 1989 and 1990. Clustered distribution, represented as the mode of population density in the vertical plane, occurred mainly in the oligotrophic upper layer (0–50 m depth) above the subsurface chlorophyll-a maximum layer. Its clustered degree was stronger when the mode of population density in the vertical plane was formed at shallower depth, while its longevity was shorter as mentioned above. Vertical distribution of ciliates during summer in Toyama Bay is characterized by ephemeral clustered distribution, or in other wards, by rapid alternations of appearance and disappearance of the clustered distribution.     

Stream channel erosion in a rapidly urbanizing region of the US–Mexico border: documenting the importance of channel hardpoints with Structure‐from‐Motion photogrammetry

Urbanization can lead to accelerated stream channel erosion, especially in areas experiencing rapid population growth, unregulated urban development on erodible soils, and variable enforcement of environmental regulations. A combination of field surveys and Structure‐from‐Motion (SfM) photogrammetry techniques was used to document spatial patterns in stream channel geometry in a rapidly urbanizing watershed, Los Laureles Canyon (LLCW), in Tijuana, Mexico. Ground‐based SfM photogrammetry was used to map channel dimensions with 1 to 2 cm vertical mean error for four stream reaches (100–300 m long) that were highly variable and difficult to survey with a differential GPS. Regional channel geometry curves for LLCW had statistically larger slopes and intercepts compared with regional curves developed for comparable, undisturbed reference channels. Cross‐sectional areas of channels downstream of hardpoints, such as concrete reaches or culverts, were up to 64 times greater than reference channels, with enlargement persisting, in some cases, up to 230 m downstream. Percentage impervious cover was not a good predictor of channel enlargement. Proximity to upstream hardpoint, and lack of riparian and bank vegetation paired with highly erodible bed and bank materials may account for the instability of the highly enlarged and unstable cross‐sections. Channel erosion due to urbanization accounts for approximately 25–40% of the total sediment budget for the watershed, and channel erosion downstream of hardpoints accounts for one‐third of all channel erosion. Channels downstream of hardpoints should be stabilized to prevent increased inputs of sediment to the Tijuana Estuary and local hazards near the structures, especially in areas with urban settlements near the stream channel. Copyright © 2017 John Wiley & Sons, Ltd.     

Microseismicity Induced by Heavy Rainfall Around Flooded Vertical Ore Veins

—?Microseismicity (M?M?M?M??6 were also monitored at a crustal movement monitoring station located several hundred meters from the veins. It was found that the opening of the vertical ore veins primary led to significant strain and tilt, but not to seismicity, because the delay and the longer duration of the seismicity were significant. Most seismic events involve thrusting mechanisms that are consistent with the present stress state of E-W-oriented tectonic compression, but are not consistent with the opening of the deepest ore vein. Interstingly, all the events within a few months of the heavy rainfall occurred near the faults that offset the deepest ore veins, wheareas all those events located away from the deepest ore veins occurred many months after the heavy rainfall. Consequently, the delayed diffusion of water appears to have played a dominant role in reducing rock strength, which led to seismicity in the Ikuno mine.     

Zircon U–Pb ages of granitic and mafic dikes associated with granitoids and metamorphic rocks of the Ryoke Belt in the eastern Kii Peninsula,southwest Japan

Zircon U–Pb dates for felsic and intermediate to mafic dikes intruding into the Ryoke granitoids and metamorphic rocks at selected outcrops in the Takamiyama area of the eastern Kii Peninsula, southwest Japan, were determined along with their geology and petrography to reveal the history of Cretaceous magmatism. At each outcrop, the felsic and intermediate to mafic dikes exhibit specific structures that are indicative of magma intermingling and have coeval intrusion ages of ca. 81–77 Ma. Our zircon U–Pb data complement previously published data, suggesting that the mafic magmatism continued intermittently from 83 to 76 Ma in the Takamiyama area and that magmatism migrated eastward within the Ryoke Belt. A comparison of intrusion ages between a dike and a host Ryoke granitoid at one outcrop indicates that the host rock experienced ductile deformation at ~88 to ~83 Ma. Judging from the small number of zircons and the concordant date distributions, we didn't recognize the evidence suggesting the partial melting of the host rocks, as Nakajima et al. (Journal of the Geological Society of Japan, 2021, 127, 69–78) reported.     

Structure and development of the Sagami trough and the Boso triple junction

The Sagami trough is located at the particular plate margin where the Izu forearc is subducted underneath the Honshu forearc. At its southeastern end, the world's only known TTT-type triple junction (Boso triple junction) has developed. Several different kinds of basins occur in different segments along the Sagami trough and at the triple junction. The bathymetric, geologic, and geophysical data obtained during the Kaiko Project and from additional studies are summarized together with our onland studies. We suggest that the right-lateral oblique plate motion formed an eduction margin in the Sagami basin, while a normal subduction margin and an oblique subduction margin have been formed in the Middle Sagami trough basin. These tectonic phenomena resulted from the long-lasting compressional covergence between the Philippine Sea plate and Eurasian plate since the early or middle Miocene. The North basin on the northeasternmost margin of the Philippine Sea plate near the Boso triple junction has developed as a stretched basin due to the westward motion of the Philippine Sea plate with respect to the Eurasian plate.     

Groundwater flow system under a rapidly urbanizing coastal city as determined by hydrogeochemistry

In the Jakarta area (Indonesia), excessive groundwater pumping due to the rapidly increasing population has caused groundwater-related problems such as brackish water contamination in coastal areas and land subsidence. In this study, we adopted multiple hydrogeochemical techniques to demonstrate the groundwater flow system in the Jakarta area. Although almost all groundwater existing in the Jakarta basin is recharged at similar elevations, the water quality and residence time demonstrates a clear difference between the shallow and deep aquifers. Due to the rapid decrease in the groundwater potential in urban areas, we found that the seawater intrusion and the shallow and deep groundwaters are mixing, a conclusion confirmed by major ions, Br^?:Cl^? ratios, and chlorofluorocarbon (CFC)-12 analysis. Spring water and groundwater samples collected from the southern mountainside area show younger age characteristics with high concentrations of ¹⁴C and Ca–HCO₃ type water chemistry. We estimated the residence times of these groundwaters within 45 years under piston flow conditions by tritium analysis. Also, these groundwater ages can be limited to 20–30 years with piston flow evaluated by CFCs. Moreover, due to the magnitude of the CFC-12 concentration, we can use a pseudo age indicator in this field study, because we found a positive correlation between the major type of water chemistry and the CFC-12 concentration.     

Estimated Recharge Rates From Groundwater Temperatures In The Nara Basin,Japan

Groundwater recharge rates to the sandy aquifer in the Nara basin, Japan, were determined by using a theory that describes the simultaneous transfer of heat and water in a porous medium. Seasonal changes in temperatue-depth profiles were used to estimate the recharge rates in a relatively shallow aquifer. Estimations of the recharge rates were done by fitting a dimensionless parameter to the type curves developed by Taniguchi (1993) after the amplitudes of annual variations of groundwater temperatures were measured at several depths. Annual recharge rate estimated by fitting observed temperatures to the type curves was 459 mm in the Nara basin. This value agrees well with values calculated from water-balance methods and values reported in the literature. Résumé: Les taux de recharge d'un aquifère sableux dans le bassin de Nara (Japon) ont été déterminés au moyen d'un modèle qui décrit le transfert simultané de la chaleur et de l'eau en milieu poreux. Les variations saisonnières le long de profils verticaux de température sont utilisées pour estimer les taux de recharge dan un aquifère relativement superficiel. Les estimations de ces taux de recharge ont été réalisées par l'ajustement d'un paramètre sans dimension aux courbes types proposées par Taniguchi (1993) d'après les amplitudes des variations annuelles de la température de l'eau souterraine mesurée à différentes profondeurs. La recharge annuelle estimée par l'ajustement des températures observées aux courbes types est 459 mm dans le bassin de Nara. Cette valeur est en bon accord avec celles caculées à partir du bilan hydrologique et avec celles de littérature. Resumen: Las velocidades de recarga en el acuífero arenoso de la cuenca del Nara, Japón, se determinaron por medio de una teoría que describe la transferencia simultánea de calor y agua en un medio poroso. Los cambios estacionales en los perfiles temperatura-profundidad permitieron estimar las velocidades de recarga en una acuífero relativamente somero. Las estimaciones de la velocidad de recarga se hicieron por ajuste de un parámetro adimensional a las curvas-tipo desarrolladas por Taniguchi (1993). Para ello se utilizaron las amplitudes de las variaciones anuales de las temperaturas del agua a distintas profundidades. La recarga anual en la cuenca del Nara, estimada mediante este método de ajuste de curvas, fue de 459 mm. Este valor es semejante a la recarga calculada a partir de métodos de balance y a la obtenida de la bibliografía.     

Surface tension of melts in the system CaMgSi2O6-CaAl2Si2O8 and its structural significance

The surface tension between silicate melts and air has been measured for melt compositions lying on the diopside-anorthite (Di-An) join from 1300° C to 1580° C. It ranges from 300 dyne/cm to 400 dyne/cm, and decreases with increasing temperature, except for a pure diopside composition. At relatively high temperatures, the surface tension decreases as the anorthite content increases, whereas at lower temperature it is almost constant. These results suggest that diopside melt has a more discrete structure at higher temperatures, whereas, anorthite-bearing melts do not dissociate in the temperature range studied. They also suggest that the structure of both the surface and interior parts of the melt are almost identical at lower temperatures, but at higher temperatures, the surface part has a more polymerized structure with Al₂O₃ enrichment. The surface energy, obtained from the relationship between surface tension and temperature, increases from 294 erg/cm² (Di composition) to 1013 erg/cm² (Di40An60) with increasing anorthite content.