North European last glacial–interglacial transition (LGIT; 15–9 ka) tephrochronology: extended limits and new events

High‐precision correlation of palaeoclimatic and palaeoenvironmental records is crucial for testing hypotheses of synchronous change. Although radiocarbon is the traditional method for dating late Quaternary sedimentary sequences, particularly during the last glacial–interglacial transition (LGIT; 15–9 ka), there are inherent problems with the method, particularly during periods of climate change which are often accompanied by major perturbations in atmospheric radiocarbon content. An alternative method is the use of tephras that act as time‐parallel marker horizons. Within Europe, numerous volcanic centres are known to have erupted during the LGIT, providing considerable potential for high‐precision correlation independent of past radiocarbon fluctuations. Here we report the first identification of the Vedde Ash and Askja Tephra in Ireland, significantly extending the known provenance of these events. We have also identified two new horizons (the Roddans Port Tephras A and B) and tentatively recognise an additional horizon from Vallensgård Mose (Denmark) that provide crucial additional chronological control for the LGIT. Two phases of the Laacher See Tephra (LST) are reported, the lower Laacher See Tephra (LLST) and probably the C2 phase of the Middle Laacher See Tephra (MLST‐C2) indicating a more northeasterly distribution of this fan than reported previously. Copyright © 2006 John Wiley & Sons, Ltd.     

A note on the problem of choosing a model of the Universe,IV

The Friedmannian model of the Universe with ultra-relativistic equation of statep=–1/3 withk=0 is nondecelerative, i.e., it expands with the constant velocityv=c during the whole expanding phase of evolution of the Universe. The ultrastable nondecelerative model is the only model of the Universe which fulfills all conditions resulting from the quantum-mechanical and relativistic analysis of the Universe.     

Surface complexation effects on phosphate adsorption to ferric iron oxyhydroxides along pH and salinity gradients in estuaries and coastal aquifers

Non-conservative behavior of dissolved inorganic phosphate (DIP) in estuaries is generally ascribed to desorption from iron and aluminum (hydr)oxides with increasing salinity. Here, we assess this hypothesis by simulating the reversible adsorption of phosphate onto a model oxide (goethite) along physico-chemical gradients representative of surface and subsurface estuaries. The simulations are carried out using a surface complexation model (SCM), which represents the main aqueous speciation and adsorption reactions of DIP, plus the ionic strength-dependent coulombic interactions in solution and at the mineral-solution interface. According to the model calculations, variations in pH and salinity alone are unlikely to explain the often reported production of DIP in surface estuaries. In particular, increased aqueous complexation of phosphate by Mg²⁺ and Ca²⁺ ions with increasing salinity is offset by the formation of ternary Mg-phosphate surface complexes and the drop in electrical potential at the mineral-water interface. However, when taking into account the downstream decrease in the abundance of sorption sites, the model correctly simulates the observed release of DIP in the Scheldt estuary. The sharp increase in pH accompanying the admixing of seawater to fresh groundwater should also cause desorption of phosphate from iron oxyhydroxides during seawater intrusion in coastal aquifers. As for surface estuaries, the model calculations indicate that significant DIP release additionally requires a reduction in the phosphate sorption site density. In anoxic aquifers, this can result from the supply of seawater sulfate and the subsequent reductive dissolution of iron oxyhydroxides coupled to microbial sulfate reduction.     

Methodology of hydrogeological characterization of deep carbonate aquifers as potential reservoirs of groundwater. Case of study: the Jurassic aquifer of <Emphasis Type="Italic">El Maestrazgo</Emphasis> (Castellón,Spain)

A methodology for the characterization of deep carbonate aquifers has been developed and applied to El Maestrazgo Jurassic aquifer in Castellón, Spain. Characterization of these aquifer formations, located at more than 300 m deep, consisted of a previous phase of compilation, analysis and synthesis of the existing information about the area, followed by a coordinated combination of different speciality studies: geology, stratigraphy, structural analysis, hydrogeology, hydrochemistry, geophysics and remote sensing. Geological studies included geological mapping, definition of stratigraphical units and facies and structural analysis. The aim of the hydrogeology study was to define aquifer formations, recharge area, aquifer points inventory and groundwater flow directions for the establishment of piezometric and water quality observation nets. Special techniques were applied, like thermal infrared aerial images and the evaluation of submarine groundwater discharge by means of natural radium isotopes. Hydrochemical techniques, including majority elements characterization and stable isotopes (¹⁸O, ²H and ³H) determination, allowed classifying hydrochemical facies and establishing a renewal pattern for water within the system. Geophysics was useful in determining the aquifer geometry, the features of the basement and the petrophysical characteristics of the geological formations. Preliminary results show an important tectonic complexity and the possibilities for groundwater uses in the area of study.     

A correcting “prism” for underwater viewpoints

The angular field observable in water by an observer in air depends on the configuration of the air-water interface. When the interface is a plane, the absolute limit to observable field is about from the normal to the interface. A practical limit, because of lateral chromatic aberration is considerably less, approximately 30°. A conventionally used configuration in research submersibles, is a polymethyl methacrylate port with inner and outer surfaces parallel. This has the same optical limitations as the plane air-water interface. It is shown that if the inner and outer surfaces are not required to be parallel to each other, there are solutions which permit extending the observable field to nearly a full hemisphere with acceptably small distortion and lateral chromatic aberration.     

Hydrogen and Helium under high pressure: A case for a classical theory of dense matter

When subject to high pressure, H₂ and ³He are expected to undergo phase transitions, and to become metallic at a sufficiently high pressure. Using a semiclassical theory of dense matter proposed by Savi and Kaanin, calculations of phase transition and metallisation pressure have been performed for these two materials. In hydrogen, metallisation occurs at p _M= (3.0 ± 0.2) Mbar, while for helium the corresponding value is p _M= (106 ± 1) Mbar. A phase transition occurs in helium at p _tr= (10.0 ± 0.4) Mbar. These values are close to the results obtainable by more rigorous methods. Possibilities of experimental verification of the calculations are briefly discussed.     

Simulations of 3D DC borehole resistivity measurements with a goal-oriented <Emphasis Type="Italic">hp</Emphasis> finite-element method. Part II: through-casing resistivity instruments

We simulate direct current (DC) borehole resistivity measurements acquired in steel-cased deviated wells for the assessment of rock formation properties. The assumed data acquisition configuration considers one current (emitter) and three voltage (collector) electrodes that are utilized to measure the second difference of the electric potential along the well trajectory. We assume a homogeneous, 1.27-cm-thick steel casing with resistivity equal to 10^− 5 Ω· m. Simulations are performed with two different numerical methodologies. The first one is based on transferring two-dimensional (2D) axisymmetric optimal grids to a three-dimensional (3D) simulation software. The second one automatically produces optimal 3D grids yielded by a 3D self-adaptive goal-oriented algorithm. Both methodologies utilize high-order finite elements (FE) that are specially well-suited for problems with high-contrast coefficients and rapid spatial variations of the electric field, as it occurs in simulations that involve steel-cased wells. The method based on transferring 2D-optimal grids is efficient in terms of CPU time (few seconds per logging position). Unfortunately, it may produce inaccurate 3D simulations in deviated wells, even though the error remains below 1% for the axisymmetric (vertical) well. The method based on optimal 3D grids, although less efficient in terms of CPU time (few hours per logging position), produces more accurate results that are validated by a built-in a posteriori error estimator. This paper provides the first existing simulations of through-casing resistivity measurements in deviated wells. Simulated resistivity measurements indicate that, for a 30° deviated well, measurements in conductive layers 0.01 Ω· m) are similar to those obtained in vertical wells. However, in resistive layers (10,000 Ω· m), we observe 100% larger readings in the 30° deviated well. This difference becomes 3,000% for the case of a 60° deviated well. For this highly-deviated well, readings corresponding to the conductive formation layer are about 30% smaller in magnitude than those in a vertical well. Shoulder effects significantly vary in deviated wells.