A continuum‐discrete hydromechanical analysis of granular deposit liquefaction

A coupled continuum‐discrete hydromechanical model was employed to analyse the liquefaction of a saturated loose deposit of cohesionless particles when subjected to a dynamic base excitation. The pore fluid flow was idealized using averaged Navier–Stokes equations and the discrete element method was employed to model the solid phase particles. A well established semi‐empirical relationship was utilized to quantify the fluid–particle interactions. The conducted simulations revealed a number of salient micro‐mechanical mechanisms and response patterns associated with the deposit liquefaction. Space and time variation of porosity was a major factor which affected the coupled response of the solid and fluid phases. Pore fluid flow was within Darcy's regime. The predicted response exhibited macroscopic patterns consistent with experimental results and case histories of the liquefaction of granular soil deposits. Copyright © 2004 John Wiley & Sons, Ltd.     

Sensitivity analysis of a deterministic water temperature model to forest canopy and soil temperature in Catamaran Brook (New Brunswick,Canada)

A coupled deterministic hydrological and water temperature model, CEQUEAU, was modified to include soil temperature and crown closure in its calculation of local advective terms in the heat budget. The modified model was than tested to verify its sensitivity to these modifications. An analysis of the heat budget of a small forested catchment in eastern Canada revealed that the advective term related to interflow plays a significant role in the daily water heat budget, providing on average 28% of the local advective budget (which also includes advective heat terms from surface runoff and groundwater) and nearly 14% of the total heat budget (which includes all radiative terms at the water surface, convection and evaporation, as well as the local advective terms). Relative sensitivity indices (RSIs) were used to verify the impact of the newly introduced parameters and variables. Among them, parameters related to the forest cover (crown closure and leaf area index) have a maximum RSI of ?0·6; i.e. a 100% increase in value produces a 60% decrease in the local advective term. Parameters with the greatest influence are the volume of water contributing to interflow and the amplitude of the net radiative flux at the soil surface, which, if doubled, would double the contribution of the local interflow advective term to the heat budget. Copyright © 2003 John Wiley & Sons, Ltd.     

Screening of polymers on selected Hawaii soils for erosion reduction and particle settling

In recent years, high‐molecular‐weight anionic polyacrylamides (PAMs) have been tested on a variety of soils, primarily in temperate climates. However, little information is available regarding the effectiveness of PAM for preventing soil loss through runoff in tropical settings. Screening tests were performed using three negatively charged PAMs and one positively charged PAM on five Hawaii soils (two Oxisols, one Vertisol, and two Aridisols) to determine erosion loss, sediment settling, and aggregate stability. A laboratory‐scale rainfall simulator was used to apply erosive rainfall at intensities from 5 to 8·5 cm h^?1 at various PAM doses applied in both dry and solution forms. Soil detachment due to splash and runoff, as well as the runoff and percolate water volumes, were measured for initial and successive storms. The impact of PAM on particle settling and aggregate stability was also evaluated for selected soil‐treatment combinations. Among the PAMs, Superfloc A‐836 was most effective, and significantly reduced runoff and splash sediment loss for the Wahiawa Oxisol and Pakini Andisol at rates varying between 10 and 50 kg ha^?1. Reduced runoff and splash sediment loss were also noted for PAM Aerotil‐D when applied in solution form to the Wahiawa Oxisol. Significant reductions in soil loss were not noted for either the Lualualei Vertisol or the Holomua Oxisol. It is believed that the high montmorillonite content of the Lualualei Vertisol and the low cation‐exchange capacity of the Holomua Oxisol diminished the effectiveness of the various PAMs tested. The polymers were also found to enhance sediment settling of all soils and helped improve their aggregate stability. This screening study shows the potential use of PAM for tropical soils for applications such as infiltration enhancement, runoff reduction, and enhanced sedimentation of detention ponds. Copyright © 2005 John Wiley & Sons, Ltd.     

Interstitial water chemistry of the inner continental shelf sediments off the gironde estuary

The interstitial water composition ( , alkalinity, Ca²⁺, Mg²⁺, Sr²⁺, Na⁺, K⁺) and the cation exchange capacity (CEC) were determined for the muddy sediments of the continental shelf off the Gironde Estuary (France), in the area where the sediment represents the deposit of the muddy suspension of the river. In comparison with seawater concentrations, the pore waters below 10 cm depth, show depletions of and Ca²⁺ and below a 30 cm depth show depletions of Mg²⁺. Inversely, the upper 10 cm an enrichment of Ca²⁺ concentration, and an increase of K⁺ concentration to a 40 cm depth. High values of are observed at the top 4 cm. Alkalinity enrichment is observed along the length of the core. Applying the alkalinity models for the sediment below a 10 cm depth demonstrates generally that calculated alkalinities are higher than the measured ones. Ca²⁺ dissolution occurs at the first 10 cm and authigenic carbonate precipitation starts beneath that level. Mg²⁺ depletion is accompanied by bicarbonate loss. This proves that Mg²⁺ depletion is due to a Mg-silicate reaction. The result of the CEC does not confirm the Mg²⁺ uptake by clay minerals in exchangeable site, under reducing conditions. Diffusion and bioturbation play an important role in the pore water concentration at the top of the core.     

Design of efficient base isolation for hammers and presses

Foundations supporting hammers and presses have to withstand powerful short-period impact loads. When designing these foundations, their vibration amplitudes and the forces transmitted to the supporting piles or soil medium must be reduced to meet serviceability and stability requirements. Mounting systems are often used to achieve this goal. The objectives of this paper are to investigate the efficiency of mounting systems for different foundation configurations and to provide practical guidance for their design. A comprehensive parametric study was conducted and the results were used to establish a set of charts for the design of efficient mounting systems.     

Tectonic and hydrodynamic control of landslides in the northern area of the Central Rif, Morocco

The northern edge of the Central Rif (Morocco) is subject to numerous landslides where mechanisms do not correspond to the classical models used by geomechanics specialists. It is necessary to adopt a multidisciplinary approach that combines geomorphology, geology, hydrogeology, and geotechnics in order to understand how such slope failures are generated, especially in a region with a heterogeneous structure characterised by significant lithological differences, severe fracturing, and thrust sheets where tectonic contacts play a major role in groundwater circulation. This report shows that these failures are essentially controlled by the tectonic contact separating the Tisirene and Chouamat thrust sheets and by subsurface hydrodynamic conditions. A model of spatial and temporal variations in the factor of safety is proposed.     

Use of genetic algorithm in new approach to modeling of flood routing

Journal of Oceanology and Limnology - The hydrological models and simplified methods of Saint-venant equations are used extensively in hydrological modeling, in particular for the simulation of the...     

Quantifying the spatio-temporal patterns of settlement growth in a metropolitan region of Ghana

Retrospective understanding of the magnitude and pace of urban expansion is necessary for effective growth management in metropolitan regions. The objective of this paper is to quantify the spatial–temporal patterns of urban expansion in the Greater Kumasi Sub-Region (GKSR)—a functional region comprising eight administrative districts in Ghana, West Africa. The analysis is based on Landsat remote sensing images from 1986, 2001 and 2014 which were classified using supervised maximum likelihood algorithm in ERDAS IMAGINE. We computed three complementary growth indexes namely; Average Annual Urban Expansion Rate, Urban Expansion Intensity Index (UEII) and Urban Expansion Differentiation Index to estimate the amount and intensity of expansion over the 28-year period. Overall, urban expansion in the GKSR has been occurring at an average annual rate of 5.6 %. Consequently, the sub-region’s built-up land increased by 313 km² from 88 km² in 1986 to 400 km² in 2014. The analysis further show that about 72 % of the total built-up land increase occurred in the last 13 years alone, with UEII value of 0.605 indicating a moderate intensity of urban expansion. Moreover, the metropolitan-core of the sub-region, being the focal point of urban development and the historical origins of expansion, accounted for more than half of the total built-up land increase over the 28-year period. Over the last decade and half however, urban expansion has spilled into the neighbouring peripheral districts, with the highest intensity and fastest rate of expansion occurring in districts located north and north east of the sub-regional core. We recommend a comprehensive regional growth management strategy grounded in effective strategic partnerships among the respective administrative districts to curb unsustainable urban expansion.     

Rock slope stability and design in Arafat–Muzdalifa area,Saudi Arabia

The present contribution is a complete study extending before, during, and after the excavation of the mountain side that lying north of road 7. It includes slope stability analysis, rock cut design, and rockfall modeling for natural slope and rock cut face. Neoproterozoic granodiorite and biotite granite forming the slope body have medium to very high strengths. Mineral compositions and textures of these intact rocks control the strength values. These rocks are intensively dissected by fractures that are filled with montmorillonite and chlorite. The high plasticity and slippery nature of these filling materials represent the main problem that may face a rock cut designer because they damage the mechanical properties of these fractures. The problem begins with the selection of the rock mass classification that deals with the fracture fillings and extends during the stability analysis and the suggestion of mitigation and supporting measures. The rock masses building the natural slope are suffered by plane, wedge, and toppling failures. Therefore, two rock cut designs are suggested to avoid the hazards related to these failures and considering the construction cost as well. Rockfall modeling for the natural slope and rock cut designs was done to assess the hazards related to these falling of the blocks. The kinetic energy of falling blocks is represented on the roadway by the coverage distance and block rebound amplitude. Slope height has a positive effect on the values of these distance and amplitude, whereas the steepness of berm height has a negative effect on them. Coverage distance is a function to the location of rockfall barrier and to the width of road ditch, while the amplitude controls the barrier height.