Vegetation dynamics during the late Pleistocene in the Barreirinhas region, Maranhão State, northeastern Brazil, based on carbon isotopes in soil organic matter

The study place is in the Barreirinhas region, Maranhão State, northeastern Brazil. A vegetation transect of 78 km was studied among four vegetation types: Restinga (coastal vegetation), Cerrado (woody savanna), Cerradão (dense woody savanna), and Forest, as well as three forested sites around Lagoa do Caçó, located approximately 10 km of the transect. Soil profiles in this transect were sampled for δ¹³C analysis, as well as buried charcoal fragments were used for ¹⁴C dating. The data interpretation indicated that approximately between 15,000 and ∼9000 ¹⁴C yr B.P., arboreal vegetation prevailed in the whole transect, probably due to the presence of a humid climate. Approximately between ∼9000 and 4000-3000 ¹⁴C yr B.P., there was the expansion of the savanna, probably related to the presence of drier climate. From ∼4000-3000 ¹⁴C yr B.P. to the present, the results indicated an increase in the arboreal density in the area, due to the return to a more humid and probably similar climate to the present. The presence of buried charcoal fragments in several soil depths suggested the occurrence of palaeofires during the Holocene. The vegetation dynamic inferred in this study for northeastern Brazil is in agreement with the results obtained in areas of Amazon region, based on pollen analysis of lake sediments and carbon isotope analysis of soil organic matter (SOM), implying than similar climatic conditions have affected these areas during the late Pleistocene until the present.     

Electrodialytic remediation of CCA-treated waste wood in pilot scale

When chromated copper arsenate (CCA)-treated wood is removed from service and turns into waste, the contents of Cu, Cr and As remain high due to the strong fixation of CCA in the wood. This high content of toxic compounds presents a disposal challenge. Incineration of CCA-treated waste wood is not allowed in Denmark; instead, the wood is to be land-filled until new methods for handling the wood are available. Since the amounts of CCA-treated wood being removed from service is expected to increase in the years to come, the need for finding alternative handling methods is very relevant. In this study, the usefulness of Electrodialytic Remediation was demonstrated for handling of CCA-treated waste wood in pilot scale. The electrodialytic remediation method, which uses a low-level direct current (DC) as the cleaning agent, combines electrokinetic movement of ions in the wood matrix with the principles of electrodialysis. It has previously been shown that it is possible to remove Cu, Cr and As from CCA-treated wood using electrodialytic remediation in laboratory scale, but until now, the method had not been studied in large scale. The pilot-scale plant used in this study was designed to contain up to 2 m³ wood chips. Six remediation experiments were carried out. In these experiments, the process was up-scaled stepwise by increasing the distance between the electrodes from initially 60 cm to finally 150 cm. The remediation time was varied between 11 and 21 days, and phosphoric acid and/or oxalic acid was used to facilitate the desorption of CCA from the wood. In the most successful of the experiments carried out, the concentration of CCA in the wood was reduced by up to 82% for Cr, 88% for Cu and at least 96% for As.     

Case study on the strategy and application of enhancement solutions to improve remediation of soils contaminated with Cu, Pb and Zn by means of electrodialysis

Numerous studies have been conducted with electrochemical removal of heavy metals from spiked kaolinite. Meanwhile, when moving from kaolinite to real soils, new factors must be taken into account—factors influencing, e.g., the buffering capacity of the soil against acidification and the adsorption/desorption processes of the heavy metals. The present study gives some examples where it is necessary to use an enhancement solution to aid desorption of Cu, Zn and Pb during electrodialytic treatment. Dependent on the composition of the pollution, different choices can be made. In the case of a Cu-polluted calcareous soil, ammonia may be used as enhancement solution, due to the formation of charged complexes between ammonia and Cu. Thus, Cu is mobile at high pH when ammonia is added and Cu can be removed without dissolving the calcareous parts. Zn is also mobilized by ammonia, but to a lesser extent than Cu. In the case of Cu, Zn and Pb at the same time, alkaline ammonium citrate may be a solution. It was shown that this enhancement solution could mobilize these three pollutants, but optimization of concentration and pH of the ammonium citrate is still needed. When choosing a remediation scheme for electrochemical treatment of an actual industrially polluted soil, this scheme must be chosen on basis of characterization of soil and pollution combination.     

Geological and SHRIMP II U-Pb constraints on the age and origin of the Breves Cu-Au-(W-Bi-Sn) deposit,Carajás,Brazil

The Breves deposit in the Carajás Copper-Gold Belt, Brazil, a member of the Cu-Au-(W-Bi-Sn) group of deposits, contains about 50 Mt of 1.22% Cu, 0.75 g/t Au, 2.4 g/t Ag, 1,200 g/t W, 70 g/t Sn, 175 g/t Mo and 75 g/t Bi. It is hosted by sandstones and siltstones of the Águas Claras Formation (minimum age of 2,681±5 Ma) in the roof zone of a complex, highly altered granite intrusion. The mineralisation is disseminated in a greisenized zone, resulting from alteration of probable monzogranites and syenogranites. The ore-bearing greisen contains abundant xenomorphic quartz in association with Fe-chlorite and muscovite. The gangue assemblage also includes fluorite, tourmaline, and minor amounts of monazite, xenotime, chlorapatite, thorite, zircon, calcite, siderite and bastnäesite. Copper mineralisation is dominated by chalcopyrite associated with pyrite, arsenopyrite, pyrrhotite and molybdenite. Gold particles, in equilibrium with native bismuth, are common as inclusions in chalcopyrite. The greisen contains sub-economic concentrations of tungsten and niobium that are related to the presence of ferberite, qitianlingite and Nb-rutile. SHRIMP II zircon dating of the host granites gives ²⁰⁷Pb/²⁰⁶Pb ages of 1,878±8 and 1,880±9 Ma for two phases, and a combined age of 1,879±6 Ma. SHRIMP II dating of monazite and xenotime grains in late- to post-mineralisation veins gives a combined ²⁰⁷Pb/²⁰⁶Pb age of 1,872±7 Ma, indistinguishable from the ages of the granites. This provides a genetic connection between the Breves deposit and the ca. 1.88 Ga A-type granite magmatism that typifies the Carajás Belt as part of a much larger, intracratonic magmatic province that extends over much of the Amazonian Craton. The recognition of this association has exploration implications, not only for the geophysical signature of the granite roof zones, but also for likely geochemical dispersion around the deposits of this type.Editorial handling: G. Beaudoin     

Cognate clinopyroxene from Paleogene mantle xenolith-bearing basanite lavas (East Serbia, SE Europe): the role of dissolution of mantle orthopyroxene

The study focuses on clinopyroxene from mantle xenolith-bearing East Serbian basanites and suggests that dissolution of mantle orthopyroxene played an important role in at least some stages of the crystallization of these alkaline magmas. Five compositional types of clinopyroxene are distinguished, some of them having different textural forms: megacrysts (Type-A), green/colourless-cored phenocrysts (Type-B), overgrowths and sieve-textured cores (Type-C), rims and matrix clinopyroxene (Type-D), and clinopyroxene from the reaction rims around orthopyroxene xenocrysts (Type-E). Type-A is high-Al diopside that probably crystallized at near-liquidus conditions either directly from the host basanite or from compositionally similar magmas in previous magmatic episodes. Type-B cores show high ^VIAl/^IVAl≥1 and low Mg# of mostly <75 and are interpreted as typical xenocrysts. Type-C, D and E are interpreted as typical cognate clinopyroxene. Type-D has Mg#<78, Al₂O₃?=?6–13?wt.%, TiO₂?=?1.5–4.5?wt.%, and Na₂O?=?0.4–0.8?wt.% and compositionally similar clinopyroxene is calculated by MELTS as a phase in equilibrium with the last 30?% of melt starting from the average host lava composition. Type-C has Mg#?=?72–89, Al₂O₃?=?4.5–9.5?wt.%, TiO₂?=?1–2.5?wt.%, Na₂O?=?0.35–1?wt.% and Cr₂O₃?=?0.1–1.5?wt.%. This clinopyroxene has some compositional similarities to Type-E occurring exclusively around mantle orthopyroxene. Cr/Al vs Al/Ti and Cr/Al vs Na/Ti plots revealed that Type-C clinopyroxene can crystallize from a mixture of the host basanite magma and 2–20?wt.% mantle orthopyroxene. Sieve-textured Type-C crystals show characteristics of experimentally produced skeletal clinopyroxene formed by orthopyroxene dissolution suggesting that crystallization of Type-C was both texturally and compositionally controlled by orthopyroxene breakdown. According to FeO/MgO^cpx/melt modelling the first clinopyroxene precipitating from the host basanite was Type-A (T?~?1250?°C, p?~?1.5?GPa). Dissolution of orthopyroxene produced decreasing FeO/MgO^melt and crystallization of Type-E and sieve-textured Type-C clinopyroxene (0.3–0.8?GPa and 1200–1050?°C). The melt composition gradually shifted towards higher FeO/MgO^melt ratios precipitating more evolved Type-C and Type-D approaching near-solidus conditions (<0.3?GPa; ~950?°C).     

Numerical simulation of the diurnal cycle of rainfall in SW Amazon basin during the 1999 rainy season: the role of convective trigger function

In continental areas, the maximum rainfall simulated with the Brazilian developments on the Regional Atmospheric Modeling System (BRAMS) occurs around 4?h earlier than the one observed with rain gauges. This work presents the successful implementation of a new convective trigger function (CTF) in the convective parameterization scheme used in BRAMS that corrects this misfit between model and observations. The importance of the CTF formulation on the diurnal cycle of rainfall over the Amazon Basin is reflected by the following numbers: Over Rondonia (SW Amazonia), the original version of BRAMS simulates the maximum rainfall at 1400 UTC (1000 LST), with the new CTF maximum shifting to 1800?UTC (1400?LST), while the S-band radar rainfall maximum is at 1900?UTC (1500?LST). This is attributed to two factors: (1) the new CTF is now coupled to the sensible and latent heat fluxes at surface; (2) during the early morning, the convective available potential energy is reduced.     

Downward longwave radiation estimates for clear and all-sky conditions in the Sertãozinho region of São Paulo, Brazil

The accurate estimate of the surface longwave fluxes contribution is important for the calculation of the surface radiation budget, which in turn controls all the components of the surface energy budget, such as evaporation and the sensible heat fluxes. This study evaluates the performance of the various downward longwave radiation parameterizations for clear and all-sky days applied to the Sertãozinho region in São Paulo, Brazil. Equations have been adjusted to the observations of longwave radiation. The adjusted equations were evaluated for every hour throughout the day and the results showed good fits for most of the day, except near dawn and sunset, followed by nighttime. The seasonal variation was studied by comparing the dry period against the rainy period in the dataset. The least square linear regressions resulted in coefficients equal to the coefficients found for the complete period, both in the dry period and in the rainy period. It is expected that the best fit equation to the observed data for this site be used to produce estimates in other regions of the State of São Paulo, where such information is not available.     

Paleoecology and radiocarbon dating of the Pleistocene megafauna of the Brazilian Intertropical Region

During the Pleistocene a fauna composed of large (biomass > 44 kg) and giant mammals (biomass > 1000 kg) that are usually associated with open environments lived in the Brazilian Intertropical Region. We present here new information concerning the paleoecology and chronology of some species of this megafauna. Carbon isotope analyses were performed for a better understanding of the paleoecology of the species Eremotherium laurillardi (Lund, 1842), Notiomastodon platensis (Ameghino, 1888) and Toxodon platensis (Owen, 1849). The δ¹³C data allow attributing a generalist diet to these species, which varied according to the kind of habitat in which they lived. In more open habitats all species were grazers; in mixed habitats E. laurillardi and T. platensis were mixed feeders, and N. platensis was grazer; and in more closed habitats all species were mixed feeders.