Determination of the regional deformation rates of Shanghai and Kashima VLBI stations based on ITRF97

The vertical deformation rates (VDRs) and horizontal deformation rates (HDRs) of Shanghai VLBI station in China and Kashima and Kashima34 VLBI stations in Japan were re-analysed using the baseline length change rates from Shanghai to 13 global VLBI stations, and from Kashima to 27 stations and from Kashima34 to 12 stations, based on the NASA VLBI global solution glb1123 (Ma, 1999). The velocity vectors of the global VLBI stations were referred to the ITRF97 reference frame, and the Eulerian vectors of different models of plate motion were used for comparative solutions. The VDR of Shanghai station is estimated to be −1.91±0.56 mm/yr, and those of Kashima and Kashima34 stations, −3.72±0.74mm/yr and −8.81±0.84mm/yr, respectively. The difference between the last two was verified by further analysis. Similar estimates were also made for the Kokee, Kauai and MK_VLBA VLBI stations in mid-Pacific.     

Morphological characters of the two-ribbon flare of 1981 May 13 and their explanation

We give a summary of the morphology of the two-ribbon flare of 1981 May 13. One striking feature is that the Ha flare began at about 0338' UT and the double-ribbon structure was formed about 0346, $\text{before}$ the impulsive phase of the radio 3 cm burst at 04 11 UT. The 3 cm radio burst flux beginning at 03 33 UT showed only slow, stepwise increases lasting half an hour until the impulsive phase and this type of increase is usually regarded to be a typical thermal process. Each step in the radio flux corresponded to a variation in the Ha flare, showing that the radio and Hα emissions during this period came from the same thermal source. In this paper, we explain this behaviour in terms of Hyder's model: we think that the magnetic trough supporting the solar prominence rose for some reason, causing the prominence matter (the dark filaments) to fall along the magnetic lines and to hit the chromosphere and trigger off the flare. We give rough estimates of the energy density, the height of prominence and the infall matter at the different radio increments. We also give a qualitative explanation for the appearances of the single-peak structure in the radio burst at 0411 and the covering of the sunspot shortly after at 04 13 and propose several possible mechanisms.     

草簇状石墨烯片限域Pd纳米粒子及其催化应用(英文)

通过氨基离子液体改性石墨烯,并将其固载于堇青石表面,作为负载型Pd催化剂的载体.所制备的Pd催化剂经加氢老化后,表面石墨烯呈草簇状结构,将Pd纳米粒子限域于片层内,有效防止了Pd的流失和团聚.在重要的工业反应对羧基苯甲醛(4-CBA)加氢中,此结构催化剂与传统的钯碳催化剂相比,表现出很好的稳定性     

Electrical and electromagnetic surveys to locate possible causes of water seepage to ground surface at a quarry open pit near Helwan city,Egypt

Water seepage to ground surface at a limestone quarry located at Wadi Garawy about 20 km south-east of Helwan city in Egypt posed a real threat to the mining activity at the quarry. The quarry area is known to be very dry for decades and away from water utilities and infrastructures that may cause water leaks to the quarry. Geophysical investigation including 1D Vertical Electrical Sounding (VES), 2D Electrical Resistivity Tomography (ERT) and 1D Transient Electromagnetic (TEM) surveys were conducted to characterize the rock sequence and locate what could be a possible source of water seepage to the quarry. The resistivity profiles generated from the VES and TEM surveys mapped the rock units in the area down to depths exceeded 100 m. The ERT profiles acquired from the quarrying zone close to the water seepage spot have imaged the top of groundwater level at few meters below the ground surface at the quarry open pit. The spot of groundwater seepage seemed to occur at an area of limestone dissolution that were filled by finer sediments. The finer sediments acted as a hydrological conduit that allowed an upward seepage of groundwater to ground surface under the capillary action effect.     

Comprehensive analysis control effect of faults on the height of fractured water-conducting zone in longwall mining

Natural Hazards - In order to examine the height of a fractured water-conducting zone due to the presence of a fault, a typical working face in the Baodian Coal Mine which is located in the Yanzhou...     

Holocene environmental instability in the wetland north of the Tiber delta (Rome,Italy): sea-lake-man interactions

Combined analyses of pollen, seeds, woods, micro-charcoal and non-pollen palynomorphs from Stagno di Maccarese, an artificially dried out coastal basin north of the Tiber delta now occupied by the Fiumicino Airport (Rome, Italy), document marked vegetation and environmental changes during the last 8300 years. Between 8300 and 5400 cal. a BP dense mixed deciduous and evergreen forests surrounded a eutrophic freshwater basin. An abrupt change around 5400 cal. a BP marks the transition to a marshy environment, due to a lowering of the water table. An increase of cereals and micro-charcoals matches the presence of a nearby Eneolithic settlement. Between 5100 and 2900 cal. a BP there is a remarkable expansion of riparian trees, indicating an increase of the water level. Between 2900 and 2000 cal. a BP, a new development of marshlands points to a progressive lowering of the lake. After 2000 cal. a BP, during the Roman exploitation of the area, an expansion of arboreal vegetation is recorded, characterized by evergreen and deciduous oak-dominated forests, while an extensive chenopods marshland matches the presence of saltworks. On the whole, the Stagno di Maccarese area appears very unstable, due to changes in lake level, introgression of marine water, eutrophic phases, flood events, desiccations and openings of the forest vegetation.     

Application of a unified linear yield criterion in plane strain to study the strength theory effect in geotechnical engineering

The plane strain condition is a common, but polyaxial stress state for geotechnical structure designs, in which the selection of an appropriate yield or failure criterion is crucial to reasonably account for the intermediate principal stress. Under plane strain condition, a unified linear yield criterion for seven commonly used geotechnical yield criteria is presented in conjunction with the inductive method. These seven yield criteria considered in this study are the Mohr–Coulomb, Tresca, Drucker–Prager, Mogi–Coulomb, Extended Matsuoka–Nakai, Extended Lade–Duncan criteria, and the Unified Strength Theory. The generalized analytical solutions for earth pressure of retaining walls, critical load of strip foundations as well as stress and displacement of circular tunnels are derived on the basis of the proposed unified yield criterion, and their respective theoretical significance is analyzed. Thereafter, the critical load of strip foundations obtained herein is compared with two numerical results from the literature. Furthermore, the effect of strength theory on result differences of the three typical geotechnical problems by simply selecting constants, which conform to different yield criteria, is explored through a parametric study. It is found that the proposed unified yield criterion is convenient for investigating analytical solutions of the aforementioned geotechnical structures. The strength theory effect due to adopting different yield criteria is considerably significant, which cannot be ignored. Additionally, recommendations are provided on how to make use of these seven yield criteria for an optimum design.