A redundant multivalued logic for a 10-Gb/s CMOS demultiplexer IC

A redundant multivalued logic is proposed for high-speed communication ICs. In this logic, serial binary data are received and converted into parallel redundant multivalued data. Then they are restored into parallel binary data. Because of the multivalued data conversion, this logic makes it possible to achieve higher operating speeds than that of a conventional binary logic. Using this logic, a 1:4 demultiplexer (DEMUX, serial-parallel converter) IC was fabricated using a 0.18-/spl mu/m CMOS process. The IC achieved an operating speed of 10 Gb/s with a supply voltage of only 1.3 V and with power consumption of 38 mW. This logic may achieve CMOS communication ICs with an operating speed several times greater than 10 Gb/s.     

A general framework for debugging

The state of the art of debugging is examined. A debugged process model that serves as the basis of a general debugging framework is described. The relationship of the model to traditional debugging processes and support tools is discussed. A minimal set of requirements for a general debugging framework is described in terms of both the theory behind debugging methodologies and the support tools. An execution monitor, Eden, that serves as a debugging tool within this general framework is described     

Comparison of activities in selective catalytic reduction of NOx by C3H8 over Co/MFI, Fe/MFI, and H/MFI zeolite catalysts

The Co/MFI(SiO₂/Al₂O₃ = 30) were prepared by a precipitation method with NaOCl in alkali solutions exhibited high activities to N₂ at 250 °C for the selective catalytic reduction (SCR) of NO_x. These catalysts showed two UV–vis bands at 700 and 400 nm, indicating the presence of octahedral Co(III) as well as tetrahedral Co(II). The high SCR activity over such Co(III, II)/MFI(30) seems to come from Co(III)---O moieties. The Co(II)MFI(30) catalysts prepared from Co(II)Cl₂ exhibited low SCR activities due to the presence of tetrahedral Co(II) ions in MFI. Less CO formation occurred over Co/MFI catalysts. The Fe/MFI(30) catalyst exhibited high activity due to the presence of some Fe---O species in MFI but more amount of CO were produced during SCR. H/MFI(30) catalyst exhibited a good SCR activity. However, more amount of carbonaceous deposits were produced on it. The correlation between acid concentration and SCR activity was discussed over H/MFIs.     

High-efficiency finishing process for metal mold by large-area electron beam irradiation

A new finishing process for metal molds by large-area electron beam (EB) irradiation is proposed in this study. In the large-area EB irradiation equipment used here, an EB with high-energy density is irradiated without focusing the beam, and so the EB with a maximum diameter of 60 mm can be used for melting or evaporating metal surface instantly. Experimental results show that the surface roughness decreases from 6 μmRz to less than 1 μmRz in just a few minutes under proper machining conditions. The corrosion resistance of metal mold surface also could be greatly improved by large-area EB irradiation. Furthermore, the surface roughness of tilting surface close to 90° could be well improved. Therefore, large-area EB irradiation method has a possibility to become a high-efficiency finishing process for metal molds.     

Evaluation of intraductal ultrasonography in the diagnosis of pancreatic cancer

An intraductal ultrasound (IDUS) probe which is inserted via the papilla into the main pancreatic duct (MPD) was evaluated in the diagnosis of 20 patients with pancreatic cancer. The examination was successfully performed with the probe in 17 of the patients (85%). Due to its high frequency (30 MHz) the probe only allowed visualization of the ductal wall and the immediate periductal vicinity (up to about 10 mm). In 15 of the 20 patients the tumors were surgically resected and IDUS scanning was also performed in vitro on the resection specimens, the results being compared to those of histopathological examination. Of these 15 patients, 13 were found to have ductal adenocarcinomas and all but one had been unequivocally diagnosed as having such by ultrasonography (US), computed tomography (CT), endoscopic retrograde cholangiopancreatography (ERCP) and endoscopic ultrasonography (EUS). IDUS showed an echorich area (corresponding to cancerous canaliculi on histopathological examination), surrounded by an echopoor area (abundant stroma). This pattern was classified as type I. In two patients with intraductal papillary carcinomas in whom a conclusive diagnosis was not established on US, CT, EUS or ERCP, IDUS showed tumorous tissue with an inhomogeneous echopattern outside (type II) or within (type III) the duct. These results show that IDUS offers valuable diagnostic information complementary to ERCP especially in cases of intraductal papillary tumors. Whether the high resolution imaging of the duct and the paraductal tissue can be used to differentiate between the different forms of pancreatic lesions (inflammation, neoplasms) has to be investigated further.     

Immunochemical characterization of anti-H monoclonal antibodies obtained from a mouse immunized with human saliva

Three IgM class anti-H monoclonal antibodies (1E3, 1E5 and 3H1) were obtained from a BALB/c mouse immunized with human O type saliva. These antibodies were found to agglutinate red cells from O group and A and B subgroups but not from Bombay and para-Bombay individuals whose H antigen was barely detected by anti-H reagents. The agglutination reactions of these antibodies were inhibited by H antigens from human tissues. It was also demonstrated that both 1E3 and 3H1 reacted with H disaccharide (Fuc alpha 1-->2Gal beta), H type 1 (Fuc alpha 1-->2Gal beta 1-->3GlcNAc beta), H type 2 (Fuc alpha 1-->2Gal beta 1-->4GlcNAc beta), H type 3 (Fuc alpha 1-->2Gal beta 1-->3GalNAc alpha) and H type 4 (Fuc alpha 1-->2Gal beta 1-->3GalNAc beta) but not with Lea (Gal beta 1-->3[Fuc alpha 1-->4]GlcNAc beta), Leb (Fuc alpha 1-->2Gal beta 1-->3[Fuc alpha 1-->4]GlcNAc beta), X (Gal beta 1-->4[Fuc alpha-->3]GlcNAc beta) or Y (Fuc alpha 1-->2Gal beta 1-->4[Fuc alpha 1-->3]GlcNAc beta). On the other hand, 1E5 was found to react with H type 1, H type 2, Leb and Y. Because of the unique reactivities against various fucosyl linkages these monoclonal antibodies could be useful not only as anti-H reagents but also as reagents for the structural analysis of fucosylated glycoconjugates.     

A 13-week subchronic toxicity study of josamycin in F344 rats

A 13-week subchronic toxicity study of josamycin was performed in male and female F344 rats to determine the maximum tolerable dose (MTD) for subsequent investigation of the carcinogenicity. As animals refused to take diet containing 5.0% josamycin in our preliminary study, dose levels in the present study were determined as 0, 0.16, 0.32, 0.63, 125 and 2.5% in diet. Rats were randomly allocated to 6 groups, each consisting of 10 males and 10 females. No animal died during the administration period and no group showed significant changes in body weight gain. Definite toxicity of josamycin was not noted in hematological and serum biochemical examinations. Histopathological examinations revealed no particular findings related to josamycin administration except cecal enlargement in the 1.25 and 2.5% groups. based on the results of the present study, it was concluded that the MTD of josamycin in 2.5% in diet, because the dietary dose level of 2.5% proved to exert no significant toxicological signs.     

A load dispatch method using fractional programming and semidefinite programming

This paper describes a load dispatch method which minimizes power cost—[fuel cost]/[electric output]—for a power system with thermal plants and energy storage facilities. The proposed method employs fractional programming to convert a minimization problem with fractional objective function to a series of quadratic minimization problems, and semidefinite programming to solve converted problems. The method provides the optimum time‐dependent power output/input and storage level of energy storage facilities as well as time‐dependent power output of thermal plants. The method has been applied to a power system with five thermal plants, two energy storage facilities of various performances, and five load demands. The optimum load scheme of four time mesh points is obtained for the thermal plants and energy storage facilities. The fractional programming successfully converges the optimal scheme through a few iterations. The semidefinite programming deals with a variable matrix of 164 dimensions, and 185 inequality constraints. © 2001 Scripta Technica, Electr Eng Jpn, 138(2): 49–58, 2002