High performance liquid chromatographic separation of stereoisomeric bile acids as their UV-sensitive esters

High performance liquid chromatographic separation of a series of mono-, di- and trihydroxylated 5β-cholanic acids which differ only in position and configuration of hydroxyl groups at positions C-3, C-7 and/or C-12, is reported. The C-24 free acids were derivatized to four different classes of UV-sensitive esters, i.e.,p-bromophenacyl (BP),m-methoxyphenacyl (MP), 4-nitrophthalimidemethyl (NPM) and 9-anthrylmethyl (AM) esters, and chromatographed on two, variants of C₁₈ reversed-phase columns (Nova-Pak C₁₈ and Zorbax ODS) with methanol-water systems as mobile phase. Separation efficiency and elution order of some isomeric pairs were influenced by both the structure of the C-24 ester groups and the nature of the columns used. Excellent chromatographic properties were found for those derivatives, particularly for the NPM esters.     

Preparation of a crack-free rough titania coating on stainless steel mesh by electrophoretic deposition

TiO₂ (anatase) coating was prepared on stainless mesh by electrophoretic (EPD) process utilizing an isopropyl alcohol (IPA)-based suspension with submicron TiO₂ powder. When the deposition time was 30 s, a smooth thin coating was obtained. It remained crack-free even after sintering. Coating surface morphology was roughened by UV pre-illumination of the suspension. Photocatalytic decomposition of IPA to acetone and resultant electrochemical reaction at cathode during EPD provides heterogeneous deposition.     

Multiple uses of Essential Oil and By-Products from Various Parts of the Yakushima Native Cedar (Cryptomeria Japonica)

This article presents multiple potential uses of the Yakushima native cedar (Cryptomeria japonica), known in Japan as the Yaku-sugi tree. The Yaku-sugi was divided into four parts: leaves, branches with leaves, branches, and stems. We obtained the essential oil, hydrosol, distillation residue, and distillation wastewater from the trees. Essential oil and hydrosol were determined to be volatile organic compounds. All samples were screened for the following bioactivities: antioxidative, antibacterial, and anti-melanogenesis activities. Freeze-dried distillation residue was tested to assess whether it had a deodorizing effect. The main component of the leaf essential oil was found to be monoterpenes. In contrast, the stem essential oil mainly contained sesquiterpenes. In terms of bioactivities, the leaf essential oil showed antibacterial activity and the stem essential oil showed anti-melanogenesis activity. Distillation residue and wastewater showed many activities, including antioxidant, antibacterial, and anti-melanogenesis activities. Moreover, the residue had a deodorizing effect against ammonia.     

Thermal Feasibility Analyses for the 1356MWe High Conversion-Type Innovative Water Reactor for Flexible Fuel Cycle

A new reactor concept of innovative water reactor for flexible fuel cycle (FLWR) is under development at Japan Atomic Energy Agency in cooperation with Japanese reactor suppliers. A design of 1,356 MWe high conversion boiling water reactor-type FLWR core, which has an instantaneous conversion ratio of 1.04, negative void coefficient, high burnup of 65 GWd/t, and 15-month operational cycle length, has been constructed. So far, studies on thermal-hydraulic characteristics have been performed for tight lattice core. Evaluation methods for the critical power and the pressure drop under both the steady and the transient states have been established, and a modified TRAC-BF1 code has been developed for the thermal-hydraulic design of the FLWR. In this paper, the thermal feasibility of the designed 1356MWe FLWR core is analyzed by using the modified TRAC-BF1 code. The analysis is first carried out for the current core design. It is confirmed that no boiling transition (BT) occurs under the steady state. However, the minimum critical power ratio (MCPR) is only about 1.08, and the BT is confirmed occurring under the postulated abnormal transient processes. Therefore, concretizations of the conditions that ensure the thermal feasibility of a natural circulation-type FLWR and a forced circulation-type FLWR are performed. As for the results, for a forced circulation-type FLWR, the operation-limited MCPR (OLMCPR) is 1.32, and the necessary minimum core coolant flow rate is 640 kg/(m²s). For a natural circulation-type FLWR, the OLMCPR is 1.19, and the necessary minimum core coolant flow rate is 560 kg/(m²s).     

Adsorption behavior of radioactive cesium by non-mica minerals

We studied the adsorption behavior of radioactive cesium (Cs) by the non-mica minerals kaolinite, halloysite, chlorite, montmorillonite, mordenite, MnO₂, TiO₂, Al₂O₃, and FeOOH to elucidate the environmental behavior of radioactive Cs fallout from the Fukushima Daiichi Nuclear Power Plant in the Tohoku region of Japan. The adsorption and desorption experiments of Cs on the minerals were carried out at the Cs concentrations 1 × 10^?4, 1 × 10^?5, and 2 × 10^?9 mole L^?1 at pH 5.5. The desorption of Cs from the minerals was examined using 0.1 mole L^?1 LiCl, NaCl, KCl, RbCl, and CsCl solutions. The sequential desorption was examined using a 0.1 mole L^?1 LiCl solution, a 1 mole L^?1 KCl solution, and a 1 mole L^?1 HCl solution. The distribution coefficient (K _d) for the minerals at the Cs concentration 10^?9 mole L^?1 was in the order of mordenite > illite > montmorillonite, sericite, MnO₂, kaolinite, and halloysite > chlorite, TiO₂, Al₂O₃, and FeOOH, differing from the order observed at higher Cs concentrations. After the sequential desorption by the three reagent solutions, the residual fraction of Cs was higher at the Cs concentration 10^?9 mole L^?1 than at higher concentrations. Approximately 40%, 40%, 50%, and 25% of the adsorbed Cs were residual in montmorillonite, mordenite, MnO₂, and kaolinite, respectively, after the sequential desorption. These results strongly suggest that (1) radioactive Cs at 10^?9 mole L^?1 is more strongly associated with the non-mica minerals than at higher concentrations of 1 × 10^?4 and 1 × 10^?5 mole L^?1, and (2) the non-mica minerals montmorillonite, mordenite, kaolinite, and MnO₂ contributed to the fixation of the radioactive Cs fallout on Fukushima soil.     

Design of a photocatalyst for bromate decomposition: surface modification of TiO2 by pseudo-boehmite

The rate of BrO3- reduction by a commercial TiO2 photocatalyst under UV illumination in an aqueous solution was increased by lowering the pH from 7 to 5. The effect is attributable to an enhancement of the electrical interaction between BrO3- and the positively charged surfaces of the TiO2 photocatalyst. The surface charge can be controlled by a surface modification of the TiO2 photocatalyst without controlling the pH of the water. In fact, the isoelectric point of surface-modified TiO2 was higher than that of the unloaded TiO2 photocatalyst, resulting in an increase in the rate of the photocatalytic reduction of BrO3- at a neutral pH. This increase is explained by an increase in the amount of adsorbed BrO3- on the photocatalyst surface.     

High temperature superconductor micro-superconducting-quantum-interference-device magnetometer for magnetization measurement of a microscale magnet

We have developed a high temperature superconductor (HTS) micrometer-sized dc superconducting quantum interference device (SQUID) magnetometer for high field and high temperature operation. It was fabricated from YBa2Cu3O7-delta of 92 nm in thickness with photolithography techniques to have a hole of 4x9 microm2 and 2 microm wide grain boundary Josephson junctions. Combined with a three dimensional magnetic field coil system, the modulation patterns of critical current Ic were observed for three different field directions. They were successfully used to measure the magnetic properties of a molecular ferrimagnetic microcrystal (23x17x13 microm3), [Mn2(H2O)2(CH3COO)][W(CN)8]2H2O. The magnetization curve was obtained in magnetic field up to 0.12 T between 30 and 70 K. This is the first to measure the anisotropy of hysteresis curve in the field above 0.1 T with an accuracy of 10(-12) J T(-1) (10(-9) emu) with a HTS micro-SQUID magnetometer.     

Correlations of Hepatic Hemodynamics,Liver Function,and Fibrosis Markers in Nonalcoholic Fatty Liver Disease: Comparison with Chronic Hepatitis Related to Hepatitis C Virus

The progression of chronic liver disease differs by etiology. The aim of this study was to elucidate the difference in disease progression between chronic hepatitis C (CHC) and nonalcoholic fatty liver disease (NAFLD) by means of fibrosis markers, liver function, and hepatic tissue blood flow (TBF). Xenon computed tomography (Xe-CT) was performed in 139 patients with NAFLD and 152 patients with CHC (including liver cirrhosis (LC)). The cutoff values for fibrosis markers were compared between NAFLD and CHC, and correlations between hepatic TBF and liver function tests were examined at each fibrosis stage. The cutoff values for detection of the advanced fibrosis stage were lower in NAFLD than in CHC. Although portal venous TBF (PVTBF) correlated with liver function tests, PVTBF in initial LC caused by nonalcoholic steatohepatitis (NASH-LC) was significantly lower than that in hepatitis C virus (C-LC) (p = 0.014). Conversely, the liver function tests in NASH-LC were higher than those in C-LC (p < 0.05). It is important to recognize the difference between NAFLD and CHC. We concluded that changes in hepatic blood flow occurred during the earliest stage of hepatic fibrosis in patients with NAFLD; therefore, patients with NAFLD need to be followed carefully.     

Criteria for versatile GaN MOVPE tool:high growth rate GaN by atmospheric pressure growth

Growth rate has a direct impact on the productivity of nitride LED production.Atmospheric pressure growth of GaN with a growth rate as high as 10μm/h and also Al_0.1Ga_0.9N growth of 1μm/h by using 4 inch by 11 production scale MOVPE are described.XRD of（002） and（102） direction was 200 arcsec and 250 arcsec, respectively.Impact of the growth rate on productivity is discussed.