Electrocoagulation technique in enhancing COD and suspended solids removal to improve wastewater quality.

This paper presents a preliminary study for the removal of COD and suspended solids in wastewater treatment by combining magnetic field and electrocoagulation (EC) technology. The experiments were carried out using batch apparatus and setup in the static method. Batch experiments with two monopolar iron (Fe) plate anodes and cathodes were employed as electrodes. Wastewater samples were prepared from milk powder with an initial COD of 1,140 mgL(-1) and suspended solids of 1,400 mgL(-1) and acidic conditions were employed (pH approximately 3). DC current was varied from 0.5-0.8 A and operating times were between 30 and 50 min. The results show that the effluent wastewater was very clear (turbidity approximately 9 NTU) and its quality exceeded the direct discharge standard. The suspended solids and COD removal efficiencies were as high as 30.6 and 75.5%, respectively. In addition, the experimental results also show that the electrocoagulation could neutralise the pH of wastewater.     

Mental imagery classification using one-dimensional convolutional neural network for target selection in single-channel BCI-controlled mobile robot

Neural Computing and Applications - This paper introduces the use of the one-dimensional convolutional neural network (1D-CNN) for end-to-end EEG decoding with application towards a BCI system with...     

Probing the Structural and Antimicrobial Study on a Sol–Gel Derived Velosef-Loaded Bioactive Calcium Magneso-Silicate Xerogel

Silicon - The nature of the opening silicate- based surface affects the chemical interaction, spectroscopic and antimicrobial efficiency. The aim of this approach was to evaluate the spectroscopic...     

Modern Template Design and Biological Evaluation of Cephradine-loaded Magnesium Calcium Silicate Nanocomposites as an Inhibitor for Nosocomial Bacteria in Biomedical Applications

Silicon - Magnesium calcium silicate nanostructures (MCSNS) loaded with (0.0, 0.6, 0.9, and 1.2 wt%) of Cephradine-drug consisting of mesoporous particles were functionally prepared by sol-gel...     

Precautious-RM: a predictable non-preemptive scheduling algorithm for harmonic tasks

A major requirement of many real-time embedded systems is to have time-predictable interaction with the environment. More specifically, they need fixed or small sampling and I/O delays, and they cannot cope with large delay jitters. Non-preemptive execution is a known method to reduce the latter delay; however, the corresponding scheduling problem is NP-Hard for periodic tasks. In this paper, we present Precautious-RM as a predictable linear-time online non-preemptive scheduling algorithm for harmonic tasks which can also deal with the former delay, namely sampling delay. We derive conditions of optimality of Precautious-RM and show that satisfying those conditions, tight bounds for best- and worst-case response times of the tasks can be calculated in polynomial-time. More importantly, response time jitter of the tasks is analyzed and it is proven that under specific conditions, each task has either one or two values for response time, which leads to improving the predictability of the system interaction with the environment. Simulation results demonstrate efficiency of Precautious-RM in increasing accuracy of control applications.     

A process model for robotic disc grinding

Automation of deburring and cleaning of castings is desirable for many reasons. The major reasons are dangerous working conditions, difficulties in finding workers for cleaning sections, and improved profitability. A suitable robot cell capable of using different tools, such as cup grinders, disc grinders and rotary files, is the solution. This robot should be completed with sensors in order to keep the quality of the cleaned surface at an acceptable level. Although using sensors simplifies both the programming and quality control there are still other problems that need to be solved. These involve selection of machining data, e.g. feeding rate and grinding force in a force controlled operation based on parameters such as tool type, disc grinder and geometry. In order to decrease the programming time, a process model for disc grinders has been developed. This article investigates this process model and pays attention to problems such as wavy or burned surfaces and the effect of a robot's repetition accuracy in the results obtained. Many aspects treated in this article are quite general, and can be applied in other types of grinding operations.     

Architectural Design,Improvement, and Challenges of Distributed Software-Defined Wireless Sensor Networks

Wireless Personal Communications - Software-defined networking (SDN) is widely perceived to simplify network management and monitoring. The introduction of the SDN model into wireless sensor...     

A comprehensive survey of industry practice in real-time systems

Real-Time Systems - This paper presents results and observations from a survey of 120 industry practitioners in the field of real-time embedded systems. The survey provides insights into the...     

A compact hybrid feature vector for an accurate secondary structure prediction

Amino acid propensity score is one of the earliest successful methods used in protein secondary structure prediction. However, the score performs poorly on small-sized datasets and low-identity protein sequences. Based on current in silico method, secondary structure can be predicted from local folds or local protein structure. In biology, the evolution of secondary structure produces local protein structure with different lengths. To precisely predict secondary structures, we propose a derivative feature vector, DPS that utilizes the optimal length of the local protein structure. DPS is the unification of amino acid propensity score and dihedral angle score. This new feature vector is further normalized to level the edges. Prediction is performed by support vector machines (SVM) over the DPS feature vectors with class labels generated by secondary structure assignment method (SSAM) and secondary structure prediction method (SSPM). All experiments are carried out on RS126 sequences. The results from this proposed method also highlight the overall accuracy of our method compared to other state-of-the-art methods. The performance of our method was acceptable specifically in dealing with low number and low identity sequences.     

Interpolating meshes of boundary intersecting curves by subdivision surfaces

C ⁰ (creases) or C ¹ continuity across the interpolated curves.