Groundwater Level Simulation Using Soft Computing Methods with Emphasis on Major Meteorological Components

Water Resources Management - Precise estimation of groundwater level (GWL) might be of great importance for attaining sustainable development goals and integrated water resources management....     

A charge sharing–based switching scheme for SAR ADCs

This paper presents an energy-efficient switching scheme for successive approximation register (SAR) analogue-to-digital converter (ADC). The proposed scheme employs charge recycling method to keep the capacitor arrays free of transitional energy between bit generations except reset phase. In comparison with the conventional switching scheme, the proposed one achieves 100% transitional energy saving without considering reset phase. In addition, configuration of a 10-bit SAR ADC shows that the proposed switching scheme reduces the capacitor area by 25% compared with the conventional switching scheme.     

Application of GA-Optimized ANNs to Predict the Water Content,CO2 and H2S Absorption Capacity of Diethanolamine (DEA) in Khangiran Gas Sweetening Plant

Theoretical Foundations of Chemical Engineering - In this work, with the aim of accurate prediction of water content, H2S and CO2 absorption capacity of diethanolamine (DEA) solvent in Khangiran...     

Adaptive joint subband vector quantisation codec for handheld videophone applications

A new wavelet-based video codec is presented, which joins vectors in the same subbands of different frames in a frame group and uses the properties of the human visual system. Perceptual weights are designed and used in the vector selection and quantisation of the wavelet coefficients. Results indicate a significant improvement in frame quality compared to JPEG2000 image sequence coder.     

An incentive scheduling mechanism for peer-to-peer video streaming

P2P video streaming networks are found as a scalable solution and an alternative for traditional client–server based video streaming over the Internet. One of the significant issues affecting the success of any P2P streaming network is cooperation between peers. Practical observations have proved the prevalence of free riders in P2P networks that degrade their performance. To solve this problem, using incentive mechanisms, which encourage peers to contribute more in the network, is necessary. In this paper, we designed and proposed a distributed and scalable incentive mechanism for mesh based P2P video streaming networks. In the proposed approach the contribution of the peers is measured and maintained in a distributed fashion. Furthermore, we proposed an incentive sending side scheduler in which peers are served based on their contribution in the network. Our simulation evaluations show the efficiency of the proposed approach in improving the overall perceived video quality by the non-free rider nodes and consequently in the whole network.     

Applications,databases and open computer vision research from drone videos and images: a survey

Analyzing videos and images captured by unmanned aerial vehicles or aerial drones is an emerging application attracting significant attention from researchers in various areas of computer vision. Currently, the major challenge is the development of autonomous operations to complete missions and replace human operators. In this paper, based on the type of analyzing videos and images captured by drones in computer vision, we have reviewed these applications by categorizing them into three groups. The first group is related to remote sensing with challenges such as camera calibration, image matching, and aerial triangulation. The second group is related to drone-autonomous navigation, in which computer vision methods are designed to explore challenges such as flight control, visual localization and mapping, and target tracking and obstacle detection. The third group is dedicated to using images and videos captured by drones in various applications, such as surveillance, agriculture and forestry, animal detection, disaster detection, and face recognition. Since most of the computer vision methods related to the three categories have been designed for real-world conditions, providing real conditions based on drones is impossible. We aim to explore papers that provide a database for these purposes. In the first two groups, some survey papers presented are current. However, the surveys have not been aimed at exploring any databases. This paper presents a complete review of databases in the first two groups and works that used the databases to apply their methods. Vision-based intelligent applications and their databases are explored in the third group, and we discuss open problems and avenues for future research.

     

Ultrasonic-assisted drilling of Inconel 738-LC

Generally in the drilling of modern aviation materials such as nickel and titanium base super alloys, problems frequently occur in terms of burr formation at the cutter exit, tool stress, high heat generation on tool surface as well as low process reliability. A recent and promising method to overcome these technological constraints is the use of ultrasonic assistance, where high-frequency and low-amplitude vibrations are superimposed on the movement of cutting tools. This paper presents the design of an ultrasonically vibrated tool holder and the experimental investigation of ultrasonically assisted drilling of Inconel 738-LC. The circularity, cylindricity, surface roughness and hole oversize of the ultrasonically and conventionally drilled workpieces were measured and compared. The obtained results show that the application of ultrasonic vibration can improve the hole quality considerably. Improvements of up to 60% have been achieved.     

A robust optimization approach for pollution routing problem with pickup and delivery under uncertainty

Organizations have recently become interested in applying new approaches to reduce fuel consumptions, aiming at decreasing green house gases emission due to their harmful effects on environment and human health; however, the large difference between practical and theoretical experiments grows the concern about significant changes in the transportation environment, including fuel consumptions, carbon dioxide (CO₂) emissions cost and vehicles velocity, that it encourages researchers to design a near-reality and robust pollution routing problem. This paper addresses a new time window pickup-delivery pollution routing problem (TWPDPRP) to deal with uncertain input data for the first time in the literature. For this purpose, a new mixed integer linear programming (MILP) approach is presented under uncertainty by taking green house emissions into consideration. The objective of the model is to minimize not only the travel distance and number of available vehicles along with the capacity and aggregated route duration restrictions but also the amount of fuel consumptions and green house emissions along with their total costs. Moreover, a robust counterpart of the MILP is introduced by applying the recent robust optimization theory. Computational results for several test problems indicate the capability and suitability of the presented MILP model in saving costs and reducing green house gases concurrently for the TWPDPRP problem. Finally, both deterministic and robust mathematical programming are compared and contrasted by a number of nominal and realizations under these test problems to judge the robustness of the solution achieved by the presented robust optimization model.     

Preparation,characterization and in vitro drug release properties of polytrimethylene carbonate/polyadipic anhydride blend microspheres

Polyadipic anhydride (PAA), an aliphatic polyanhydride, and polytrimethylene carbonate (PTMC), an aliphatic polycarbonate, were synthesized via ring opening polymerization of oxepan‐2,7‐dione and melt‐condensation of trimethylene carbonate (1,3 dioxan‐2‐one), respectively. PTMC–PAA blend microspheres containing different ratios of buprenorphine HCl (2, 5, and 10%) were prepared by an oil‐in‐oil emulsion solvent removal method. Microspheres with different ratios of PTMC–PAA (85/15, 70/30, and 55/45) containing 5% buprenorphine HCl were prepared. Microspheres were spherical with visible cracks and pores on the surface. The average particle size of microspheres was around 200 μm for all microspheres. Drug loading efficiency of PTMC–PAA microspheres (85/15, 70/30, and 55/45) was 97.2, 95.2, and 70.2%, respectively. With the increase in the PTMC ratio, the melting point and the enthalpy of melting were both decreased. The mechanism for drug release from PTMC–PAA blend microspheres were generally a combination of drug diffusion through polymers and biodegradation of the polymers. In first three days, the release from microspheres followed zero order kinetics and was dependent on the PAA content. After three days the drug release from microspheres followed first order kinetics. In conclusion it was demonstrated that buprenorphine HCl release from microspheres could be successfully controlled by using different ratios of PTMC–PAA blends. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2377–2383, 2006     

Upstream Cutoff and Downstream Filters to Control of Seepage in Dams

The finite element method was used in this study to investigate cutoff walls and downstream filters to control seepage, the exit hydraulic gradient, and uplift forces for dams. Experimental data was used for validating the numerical modelling. The effective parameters are the length of filter and its distance downstream from the dam, the depth of the cutoff walls, the upstream dam head, and the thickness of alluvial foundation. The results show that by increasing filter length, the exit hydraulic gradient, uplift force, and seepage are reduced. The optimum relative length of the filter is L/H?=?0.028 which results in a decrease of about 65% in the exit hydraulic gradient, a 35% decrease in seepage and 10% reduction in the uplift force at the upstream foundation and a 60% decrease in the uplift force at the downstream foundation. Increase of cutoff wall depth reduces the exit hydraulic gradient, uplift force, and seepage. Using two cutoff walls both upstream and downstream of the dam decreases seepage, hydraulic gradient, and uplift force 132%, 450% and 11% respectively. However, using an upstream cutoff and downstream filter decreases seepage, hydraulic gradient, and uplift force by 180%, 490%, and 119% respectively. Thus, based on this study, recommendations for suitable combinations of upstream cutoff and downstream filter are provided.