Localization of Rho GTPase in sea urchin eggs

OBJECTIVE: Previous studies in our laboratory showed that the platelet anti-aggregating effect exerted by insulin, mediated by a nitric oxide (NO)-induced increase of guanosine-3',5'-cyclic monophosphate (cGMP), is lost in the insulin-resistant of obesity and obese NIDDM. It is not clear 1) whether the alterations observed in obese NIDDM patients are attributable to the obesity-related insulin resistance or to diabetes per se and 2) whether insulin-resistant states present a normal or a blunted response to NO. This study has been conducted to investigate 1) the platelet sensitivity to insulin in lean NIDDM and 2) the platelet sensitivity to an NO donor, glyceryl trinitrate (GTN), in obesity and in both lean and obese NIDDM. RESEARCH DESIGN AND METHODS: We determined 1) ADP-induced platelet aggregation and platelet cGMP content in platelet-rich plasma (PRP) obtained from 11 lean NIDDM patients, after a 3-min incubation with insulin (0, 240, 480, 960, 1,920 pmol/l) and 2) ADP-induced platelet aggregation and platelet cGMP content in PRP obtained from 9 obese subjects, 11 lean and 8 obese NIDDM patients, and 18 control subjects, after a 3-min incubation with 0, 20, 40, and 100 mumol/l GTN. RESULTS: Insulin dose-dependently decreased platelet aggregation in lean NIDDM patients (P = 0.0001): with 1,920 pmol/l of insulin, ADP ED50 was 141.5 +/- 6.4% of basal values (P = 0.0001). Furthermore, insulin increased platelet cGMP (P = 0.0001) from 7.5 +/- 0.2 to 21.1 +/- 3.7 pmol/10(9) platelets. These results were similar to those previously described in healthy subjects. GTN reduced platelet aggregation in all the groups (P = 0.0001) at all the concentrations tested (P = 0.0001), but GTN IC50 values were much higher in insulin-resistant patients: 36.3 +/- 5.0 mumol/l in healthy control subjects, 26.0 +/- 6.0 mumol/l in lean NIDDM patients (NS vs. control subjects), 123.6 +/- 24.0 mumol/l in obese subjects (P = 0.0001 vs. control subjects), and 110.1 +/- 19.2 mumol/l in obese NIDDM patients (P = 0.0001 vs. control subjects). GTN dose-dependently increased platelet cGMP in all the groups (P = 0.0001 in control subjects, lean NIDDM patients, and obese subjects; P = 0.04 in obese NIDDM patients). Values reached by obese subjects and obese NIDDM patients, however, were lower than those reached by control subjects (with 100 mumol/l of GTN, P = 0.001 and P = 0.0001, respectively). In healthy control subjects and in obese subjects, the insulin:glucose ratio, used as an indirect measure of insulin sensitivity, was positively correlated to GTN IC50 (r = 0.530, P = 0.008), further suggesting that the sensitivity to NO is reduced in the presence of insulin resistance. CONCLUSIONS: The insulin anti-aggregating effect is preserved in lean NIDDM; platelet sensitivity to GTN in preserved in lean NIDDM but is reduced in the insulin-resistant states of obesity and obese NIDDM. Resistance to nitrates, therefore, could be considered another feature of the insulin-resistance syndrome.     

New class of cellulose fiber spun from the novel solution of cellulose by wet spinning method

A novel cellulose solution, prepared by dissolving an alkali-soluble cellulose, which was obtained by the steam explosion treatment on almost pure natural cellulose (soft wood pulp), into the aqueous sodium hydroxide solution with specific concentration (9.1 wt %) was employed for the first time to prepare a new class of multifilament-type cellulose fiber. For this purpose a wet spinning system with acid coagulation bath was applied. The mechanical properties and structural characteristics of the resulting cellulose fibers were compared with those of regenerated cellulose fibers such as viscose rayon and cuprammonium rayon commercially available. X-ray analysis shows that the new cellulose fiber is crystallographically cellulose II, and its crystallinity is higher but its crystalline orientation is slightly lower than those of other commercial regenerated fibers. The degree of breakdown of intramolecular hydrogen bond at C₃[X_am(C₃)] of the cellulose fiber, as determined by solid-state cross-polarization magic-angle sample spinning (CP/MAS) ¹³C NMR, is much lower than other, and the NMR spectra of its dry and wet state were significantly different from each other, indicating that cellulose molecules in the new cellulose fiber are quite mobile when wet. This phenomenon has not been reported for so-called regenerated cellulose fibers.     

Activation energy for superplastic flow in aluminum matrix composites exhibiting high-strain-rate superplasticity

The activation energy for superplastic flow in a variety of Si₃N₄/Al composites exhibiting high-strain-rate superplasticity was analyzed. The activation energy in a solid state including no liquid was in agreement with the one for lattice self-diffusion. However, the activation energy was increased by the presence of a liquid phase. The behaviors of the Al-Cu-Mg(2124) alloy composites were different from those of the Al-Mg(5052), AI-Mg-Si(6061) and Al-Zn-Mg(7064) alloy composites. This is probably because partial melting occurred at a temperature lower than the apparent partial melting temperature determined by the DSC investigation, however, the volume of liquid was too small to be measured by the DSC investigations for the Al-Cu-Mg composites.     

Note: Accuracy of velocity correction for impact of a laser-accelerated miniature flyer with lithium fluoride shock-compressed along the [100] axis

We performed miniature flyer impact experiments to investigate the relationship between the apparent (u(a)) and actual (u(A)) particle velocities measured by a velocity interferometer in single-crystal lithium fluoride (LiF) that was shock-compressed along the [100] axis. The miniature flyer was accelerated to velocities in the range 652.5-1937.6 m/s by a tabletop pulsed laser. An empirical relationship of u(a) = (1.2749 ± 0.0102)u(A) was obtained. The obtained relationship agreed well with the results of a previous study within the experimental errors and its uncertainty was less than ±1%. This result indicates that the present experimental technique is effective for measuring the relationship between u(a) and u(A) of shocked transparent materials with a comparable accuracy to conventional methods.     

Production of monodisperse water-in-oil emulsions consisting of highly uniform droplets using asymmetric straight-through microchannel arrays

This paper reports the production of monodisperse water-in-oil (W/O) emulsions using new microchannel emulsification (MCE) devices, asymmetric straight-through MC arrays that were hydrophobically modified. The silicon asymmetric straight-through MC arrays consisted of numerous pairs of microslots and circular microholes whose cross-sectional sizes were 10 μm. This paper primarily focused on investigating the effect of the osmotic pressure of a dispersed phase (Π_d) on MCE. This paper also investigated the effects of the type of continuous-phase oils and the dispersed-phase flux (J _d) on MCE. The dispersed phases were Milli-Q water and Milli-Q water solutions containing sodium chloride. The continuous phases were decane (as control), hexane, medium chain triacylglyceride (MCT), and refined soybean oil (RSO) solutions containing tetraglycerin monolaurate condensed ricinoleic acid ester (TGCR) as a surfactant. At Π_d of exceeding threshold, highly uniform aqueous droplets with coefficients of variation of less than 3% were stably generated via hydrophobic asymmetric straight-through MCs. Monodisperse W/O emulsions with average droplet diameters between 32 and 45 μm were produced using the alkane–oil and triglyceride–oil solutions as the continuous phase. This work also demonstrated that the hydrophobic asymmetric straight-through MC array had remarkable ability to produce highly uniform aqueous droplets at very high J _d of up to 1,200 L m⁻² h⁻¹.     

A low wall-loading DEMO reactor design with high priority for early and reliable realization of a tokamak fusion reactor over the cost performance

Based on scientific databases adopted for designing ITER plasmas and on the advancement of fusion nuclear technology from the recent R&D program, a low wall-loading DEMO fusion reactor has been designed, where high priority has been given to the early and reliable realization of a tokamak fusion plasma over the cost performance. Since the major radius of this DEMO reactor is chosen to be 10 m, plasma ignition is achievable with a low fusion power of 0.8 GW and an operation period of 4–5 hours is available only with inductive current drive. The low ignition power makes it possible to adopt a first wall with an austenitic stainless steel, for which significant databases and operating experience exists, due to its use in the presence of neutron irradiation in fission reactors. In step with development of advanced materials, a step-wise increase of the fusion power seems to be feasible and realistic, because this DEMO reactor has the potential to produce a fusion power of 5 GW.     

Vibration control of load for rotary crane system using neural network with GA-based training

A neuro-controller for vibration control of load in a rotary crane system is proposed involving the rotation about the vertical axis only. As in a nonholonomic system, the vibration control method using a static continuous state feedback cannot stabilize the load swing. It is necessary to design a time-varying feedback controller or a discontinuous feedback controller. We propose a simple three-layered neural network as a controller (NC) with genetic algorithm-based (GA-based) training in order to control load swing suppression for the rotary crane system. The NC is trained by a real-coded GA, which substantially simplifies the design of the controller. It appeared that a control scheme with performance comparable to conventional methods can be obtained by a relatively simple approach. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

Generation of uniform drops via through-hole arrays micromachined in stainless-steel plates

This study investigated the generation of oil drops using new symmetric and asymmetric through-hole-array devices made of stainless steel. The through-hole-array devices were built by piling up six stainless-steel plates, each having circular micro-holes with a diameter of 300 or 500 μm or micro-slots with a shorter line of 300 or 500 μm. Drops were generated by injecting a dispersed phase (refined soybean oil) via the through-hole array into a compartment filled with a continuous phase (Milli-Q water solution containing one of two emulsifiers). The drop detachment from symmetric and asymmetric through holes was observed in real time and analyzed. Uniform oil drops with average diameters of 1.0–4.1 mm and coefficients of variation of typically less than 6% were generated using symmetric and asymmetric through-hole-array devices. The resultant drop diameters for asymmetric through-hole arrays were significantly smaller than those for symmetric through-hole arrays. This paper also discusses experimental results regarding the effects of the microstructure, the dimensions of the through holes, and the type of emulsifier on drop generation and the resultant drop diameter.     

Straight-through microchannel devices for generating monodisperse emulsion droplets several microns in size

The authors recently proposed a promising technique for producing monodisperse emulsions using a straight-through microchannel (MC) device composed of an array of microfabricated oblong holes. This research developed new straight-through MC devices with tens of thousands of oblong channels of several microns in size on a silicon-on-insulator plate, and investigated the emulsification characteristics using the microfabricated straight-through MC devices. Monodisperse oil-in-water (O/W) and W/O emulsions with average droplet diameters of 4.4–9.8 μm and coefficients of variation of less than 6% were stably produced using surface-treated straight-through MC devices that included uniformly sized oblong channels with equivalent diameters of 1.7–5.4 μm. The droplet size of the resultant emulsions depended greatly on the size of the preceding oblong channels. The emulsification process using the straight-through MC devices developed in this research had very high apparent energy efficiencies of 47–60%, defined as (actual energy input applied to droplet generation/theoretical minimum energy input necessary for making droplets) × 100. Straight-through MC devices with numerous oblong microfluidic channels also have great potential for increasing the productivity of monodisperse fine emulsions.     

Stronger Lempel-Ziv Based Compressed Text Indexing

Given a text T[1..u] over an alphabet of size σ, the full-text search problem consists in finding the occ occurrences of a given pattern P[1..m] in T. In indexed text searching we build an index on T to improve the search time, yet increasing the space requirement. The current trend in indexed text searching is that of compressed full-text self-indices, which replace the text with a more space-efficient representation of it, at the same time providing indexed access to the text. Thus, we can provide efficient access within compressed space. The Lempel-Ziv index (LZ-index) of Navarro is a compressed full-text self-index able to represent T using 4uH _k (T)+o(ulog?σ) bits of space, where H _k (T) denotes the k-th order empirical entropy of T, for any k=o(log? _σ u). This space is about four times the compressed text size. The index can locate all the occ occurrences of a pattern P in T in O(m ³log?σ+(m+occ)log?u) worst-case time. Although this index has proven very competitive in practice, the O(m ³log?σ) term can be excessive for long patterns. Also, the factor 4 in its space complexity makes it larger than other state-of-the-art alternatives. In this paper we present stronger Lempel-Ziv based indices (LZ-indices), improving the overall performance of the original LZ-index. We achieve indices requiring (2+ε)uH _k (T)+o(ulog?σ) bits of space, for any constant ε>0, which makes them the smallest existing LZ-indices. We simultaneously improve the search time to O(m ²+(m+occ)log?u), which makes our indices very competitive with state-of-the-art alternatives. Our indices support displaying any text substring of length ? in optimal O(?/log? _σ u) time. In addition, we show how the space can be squeezed to (1+ε)uH _k (T)+o(ulog?σ) to obtain a structure with O(m ²) average search time for m≥2log? _σ u. Alternatively, the search time of LZ-indices can be improved to O((m+occ)log?u) with (3+ε)uH _k (T)+o(ulog?σ) bits of space, which is much less than the space needed by other Lempel-Ziv-based indices achieving the same search time. Overall our indices stand out as a very attractive alternative for space-efficient indexed text searching.