Infrared and ultraviolet–visible spectroscopic studies of silica, [(Cp)2ZrCl2] and trimethylaluminum interactions

Infrared and UV–vis studies of metallocene immobilization on silica are reported here. The results have indicated changes in the Zr coordination sphere of metallocene depending on the immobilization route used. The reaction of [(Cp)₂ZrCl₂] with silica formed [(Cp)₂ZrCl]⁺[SiO]⁻ species. The same metallocene, reacting with TMA modified silica, formed monomethylated and dimethylated species by the substitution of chloro for methyl ligands, stabilized on the surface by interaction with “MAO-like” species (methylaluminoxane, MAO). These monomethylated and dimethylated cationic zirconium species are the active centers for the polymerization reaction. Different order of TMA addition in the silica modification step generated surface species of a similar nature, differing in their relative quantities. The highest amount of these active species was obtained when the support was added to the TMA solution rather than adding the TMA solution to the silica support. This was the most significant parameter affecting catalytic activity in ethylene polymerization.     

The risk of seroconversion in surgeons of the hepatitis B, hepatitis C and human immunodeficiency viruses (in a specific surgical population)

The prevalence of hepatitis B surface antigen (HBs Ag) and antibody to hepatitis C virus (HCV) and human immunodeficiency virus (HIV) was determined in the serum specimens of 288 patients treated surgically in the orthopaedic department of an urban public teaching hospital. The cumulative risk of HBV, HCV and HIV seroconversion for an orthopaedic surgeon during the surgical career span was calculated. We found that 1.4%, 3.1% and 1.7% of patients were seropositive for HBsAg, HCV antibody and HIV antibody, respectively. Seropositivity was neither associated with age nor with trauma, whereas male patients had a greater likelihood of seropositivity. Risk factor assessment did not prove to be discriminating in identifying which patients may pose a potential exposure risk. This study supports the concept of universal infection control precautions for orthopaedic surgeons regardless of the patients' risk factor or serologic status.     

Isolation of single yeast cells by optical trapping

Individual yeast cells can be successfully isolated and recultured on plates with a new isolation method making use of optical trapping with infrared laser light. The cells can be selected on morphological criteria by high resolution microscopy. The isolation device is constructed from two coverslips separated by spacers, in which selected cells are transferred to a plastic capillary, using the optical trap. To test the procedure, selection experiments were done with a mixture of two Saccharomyces cerevisiae strains, distinguishable both in fluorescence microscopy and on agar plates. These experiments showed that only selected cells were isolated, and close to 100% of the isolated stationary-phase cells formed colonies on agar plates, indicating a high recovery. A lower recovery was obtained with exponential-phase cells, possibly because of a higher sensitivity to laser irradiation. Applications for this method may include the isolation of mutants with altered morphology and the isolation of subpopulations of yeast cultures, for their separate investigation or for the initiation of pure cultures.     

Analysis of information exchange activities to actualize and validate situation awareness during shift changeovers in nuclear power plants

Shift work situations occur in almost all safety‐critical organizations, and the investigations of some catastrophes like Chernobyl, Exxon Valdez, and the Gol/Legacy mid‐air collision indicated that shift work information exchange played an important role during the evolution of the situation before the accidents. Inadequate communications during shift changeovers challenged operators' work in the moments that preceded these accidents, because they got inadequate information about the current situation. Our research focuses on the information exchange activities (verbal, written, and nonverbal) of nuclear power plant control operators during shift changeovers. Our aim is to investigate how verbal exchanges and other representations enable operator crews to share information regarding the events that occurred in the previous shift to achieve adequate situation awareness. Our findings indicated the importance and richness of the information exchange during the shift changeover process to update and validate individual and collective situation awareness, showing that information adequately shared enables the ad hoc configurations of regulation loops and a safer use of simplified strategies that can be understood and be validated by other operators, reducing the occurrence of cognitive overloads and contributing to the construction of a common cognitive ground that enhances system resilience. © 2010 Wiley Periodicals, Inc.     

Global insight into microwave stoneware firing: Macro and microstructural changes

Industrial competition and environmental concerns lead to the exploration of alternative and energy-efficient technologies for ceramic materials processing. The main objective of this work was to present microwave heating as a viable option for stoneware processing. Stoneware functional properties are presented and discussed, with emphasis on impact strength, water absorption, porosity, and color. Microstructure analyses show that microwave- and gas-fired samples have higher densifications than electrically fired samples. A relevant finding for processing conditions is that microwave firing requires temperatures approximately 100°C lower than those required by conventional firing. Microwave-fired samples’ rupture energies are approximately twice (0.57 ± 0.06 (J)) those of the reference samples (0.26 ± 0.03 (J)), and their water absorptions are approximately one-half (1.5% at 1170°C and 0.8% at 1190°C) of those of the reference samples (2.0%), whereas the water absorption of electrically fired samples at 1180°C has been estimated to be 7.5%. Color analysis also evidences a shift to lower microwave firing temperatures, what is attributed to the enhanced transformations promoted by microwave heating when comparing with the transformations promoted by conventional (gas or electric) heating.     

The Instabilisation of Dye-Fibre Bonds by Peroxide Treatments

The results are presented of an investigation into the instability induced in dye-fibre bonds by peroxide treatments. The nature of the reactions involved are discussed.     

Carbon nanotube supported ruthenium catalysts for the treatment of high strength wastewater with aniline using wet air oxidation

Multi-walled carbon nanotubes (MWCNT) can be efficiently used as support of ruthenium catalysts for the catalytic wet air oxidation of high strength wastewater containing aniline. Catalysts were prepared using different ruthenium precursors, Ruthenocene [Ru(η⁵-C₅H₅)₂], Ruthenium (1,5-cyclooctadiene, 1,3,5-cyclooctatriene) [Ru(cod)(cot)] and Ruthenium trichloride (RuCl₃ · xH₂O), different impregnation methods (excess solution and incipient wetness impregnation) and different MWCNT support surface chemistry (nitric acid oxidized MWCNT-COOH and Na₂CO₃ ion exchanged MWCNT-COONa). The efficiency of the aniline removal obtained with the catalysts prepared with different precursors decreases in the order [Ru(cod)(cot)] > RuCl₃ · xH₂O > [Ru(η⁵-C₅H₅)₂], 100% aniline conversion being obtained after 45 min of reaction with the catalyst prepared with [Ru(cod)(cot)]. The influence of the impregnation technique was found to be negligible, while the use of the MWCNT-COONa support led to increased catalyst performances when compared to that obtained with catalysts prepared with the MWCNT-COOH support. Leaching of ruthenium was observed in all cases, but the use of the precursor [Ru(cod)(cot)] and of the support MWCNT-COONa in the preparation of the catalysts seems to improve their stability. A direct relationship between metal load and catalyst stability was found and attributed to the strength of metal-support interactions.     

Thermotropic polyester: the influence of the spacer on the physical properties

Thermotropic polyesters prepared from series of 4,4-dihydroxy-,w-diphenoxy alkanes and 4,4-dichloroformyl-,w-diphenoxy alkanes are well known. The substitution of a methylenic spacer by an oxyethylenic spacer in the main chain of these polyesters drastically modifies their physical properties, particularly the mesogenic transition temperatures, as can be observed by DSC and thermooptical analysis. The thermal stability and the polymer solubility in common organic solvents of these polymers did not show a significant change. The physical properties of the two thermotropic polyesters prepared in diphenyl ether were evaluated.     

Fabrication of hybrid proton-exchange membranes using a brandnew high temperature ionic liquid as charge transporting and clay modifier

The search for more compatibility between ionic liquids (ILs) and polymer matrices in proton-exchange membrane fuel cells (PEMFCs) is one of the ways in which IL leaking from proton-exchange membranes could be minimized. In this work, it is presented the synthesis of an aromatic high temperature ionic liquid (HTIL), which, incorporated into an aromatic matrix such as sulfonated polyether ether ketone (sPEEK), is expected to diminish the IL leaking that normally affects PEMFC. Phenylethylammonium trifluoromethane sulfonate (PhetaTfO) was successfully synthesized and characterized. Its melting point of 88°C makes it to classify as a HTIL and it was employed as modifier of natural Montmorillonite, forming the phenylethylammonium intercalated montmorillonite (MmtPheta) and thus, ternary membranes containing PhetaTfO, MmtPheta, and sPEEK were prepared and characterized. Immersion tests demonstrated a higher compatibility of PhetaTfO with matrix when compared to the reference DemaTfO, which was reflected in up to 30% lower IL loss by the synthesized IL than the DemaTfO; X-rays diffraction (XRD) patterns demonstrated that the modified clay was properly dispersed inside the membranes, while dynamic mechanical analyses (DMA) results indicated a strong plasticizer effect along the increase of PhetaTfO content inside the membrane, while at the same time, the conductivity increased in an exponential manner, which permitted to identify an empiric exponential equation to evaluate the effect of concentration on ionic conductivity. The maximum conductivity obtained at IL concentrations of around 38 wt% was 0.2 mS/cm. It could expect high ionic conductivities of 10 mS/cm when the concentration of this IL is 60%; nevertheless, in order to achieve that, crosslinking treatments should be done to give the membranes enough mechanical resistance.     

Reliable Communication Networks for Smart Grid Transmission Systems

In this paper, we discuss the communications reliability requirements posed by the smart power grid with a focus on communications in support of wide area situational awareness. Implementation of wide area situational awareness relies on both transmission substation networks and wide area optical networks. We study the reliability of a sample communications network of the California Power Grid and find that its reliability falls short of proposed requirements. To overcome this issue, we consider the problem of designing the substation network and the wide area network to meet the reliability requirements while minimizing the network cost. For the wide area network design problem, we propose two alternate design approaches, namely: (1) following the power lines and (2) a mesh based design interconnecting the nodes. For the first approach we develop two greedy iterative heuristics and a heuristic integer linear programming (H-ILP) model using minimum cut-sets for network reliability optimization. The greedy iterative algorithms outperform the H-ILP approach in terms of cost, but require a larger amount of computing resources. Both proposed models are in fact complementary and thus provide a framework to optimize the reliability of smart grid communications networks restricted to following the power lines. In the second approach a greenfield mesh network method is proposed based on starting with a minimum spanning tree which is then augmented through a greedy heuristic into a mesh. Comparative numerical results show that the reliable mesh design has advantages in terms of the number of links and total link distance needed.