排序方式: 共有22条查询结果,搜索用时 15 毫秒
1.
Aishah S. A. K. Sharifah Hanafiah Zainal Abidin Mohamad R. Sulaiman Kheng H. Khoo Hairi Ali 《Journal of Material Cycles and Waste Management》2008,10(2):116-123
Malaysia is in dire need of alternatives to landfilling for solid waste management. Recently, landfills have faced the problems
of overfilling, overflowing of leachates leading to pollution of water resources, and uncontrolled dust emissions adversely
affecting the local environment. With the rising cost of urbanization coupled with the high rate of waste generation, one
possible method of waste treatment that is receiving particular attention by the government is incineration. Incineration
of solid waste is rather new in Malaysia, with limited usage in handling small sources of waste generation such as the municipal
solid waste (MSW) of resort islands; however, its potential in ameliorating the problems associated with solid waste treatment
may make it an attractive alternative to landfill. This article presents the results of test runs conducted to investigate
the performance of a locally designed and manufactured rotary kiln incinerator (RKI). The test runs were conducted using MSW
collected from the Shah Alam municipality. The combustion efficiency was analyzed by looking at the temperature profiles and
chemical species concentrations. To complement the combustion characteristics measurements, predictions of the air flow in
the incinerator during the process were also investigated. The overall performance of the RKI suggests that it is suitable
for treating MSW. 相似文献
2.
Hagos Ftwi Y. Abd Aziz Abd Rashid Zainal Ezrann Zharif Mofijur M. Ahmed Shams Forruque 《Environmental Chemistry Letters》2022,20(1):263-281
Environmental Chemistry Letters - Globally, 150–170 billion cubic metres of gas are being flared annually from petroleum refineries, petrochemical industries and from landfills. In this... 相似文献
3.
Tajul Baharuddin MF Taib S Hashim R Zainal Abidin MH Ishak MF 《Environmental monitoring and assessment》2011,180(1-4):345-369
Time-lapse resistivity measurements and groundwater geochemistry were used to study salinity effect on groundwater aquifer at the ex-promontory-land of Carey Island in Malaysia. Resistivity was measured by ABEM Terrameter SAS4000 and ES10-64 electrode selector. Relationship between earth resistivity and total dissolved solids (TDS) was derived, and with resistivity images, used to identify water types: fresh (ρ ( e ) > 6.5 Ω m), brackish (3 Ω m < ρ ( e ) < 6.5 Ω m), or saline (ρ ( e ) < 3 Ω m). Long-term monitoring of the studied area's groundwater quality via measurements of its time-lapse resistivity showed salinity changes in the island's groundwater aquifers not conforming to seawater-freshwater hydraulic gradient. In some aquifers far from the coast, saline water was dominant, while in some others, freshwater 30 m thick showed groundwater potential. Land transformation is believed to have changed the island's hydrogeology, which receives saltwater pressure all the time, limiting freshwater recharge to the groundwater system. The time-lapse resistivity measurements showed active salinity changes at resistivity-image bottom moving up the image for two seasons' (wet and dry) conditions. The salinity changes are believed to have been caused by incremental tide passing through highly porous material in the active-salinity-change area. The study's results were used to plan a strategy for sustainable groundwater exploration of the island. 相似文献
4.
Ahmed Mukhtar Abdullah Anas Patle Dipesh S. Shahadat Mohammad Ahmad Zainal Athar Moina Aslam Mohammad Vo Dai-Viet N. 《Environmental Chemistry Letters》2022,20(1):335-378
Environmental Chemistry Letters - Biodiesel is a sustainable alternative to petroleum diesel. The main bottlenecks in the commercialization of biodiesel are production costs and suitable industrial... 相似文献
5.
Leaching Characteristics of Fly Ash from Thermal Power Plants of Soma and Tunçbilek, Turkey 总被引:1,自引:0,他引:1
Use of lignite in power generation has led to increasing environmental problems associated not only with gaseous emissions but also with the disposal of ash residues. In particular, use of low quality coal with high ash content results in huge quantities of fly ash to be disposed of. The main problem related to fly ash disposal is the heavy metal content of the residue. In this regard, experimental results of numerous studies indicate that toxic trace metals may leach when fly ash contacts water. In this study, fly ash samples obtained from thermal power plants, namely Soma and Tunçbilek, located at the west part of Turkey, were subjected to toxicity tests such as European Committee for standardization (CEN) and toxicity characteristic leaching (TCLP) procedures of the U.S. Environmental Protection Agency (U.S. EPA). The geochemical composition of the tested ash samples from the power plant show variations depending on the coal burned in the plants. Furthermore, the CEN and TCLP extraction results showed variations such that the ash samples were classified as `toxic waste' based on TCLP result whereas they were classified as `non-toxic' wastes based on CEN results, indicating test results are pH dependent. 相似文献
6.
W. H. Chan M. N. Mazlee Zainal Arifin Ahmad M. A. M. Ishak J. B. Shamsul 《Journal of Material Cycles and Waste Management》2017,19(2):794-803
The porous composites of clay and fly ash have the potential to be used in many fields, such as catalyst support and gas adsorbents. In this study, various ratios of fly ash (1–2) with different percentage of suspension (50–70 wt%) were applied to produce porous clay-fly ash composites via polymeric replica technique. Fabrication process starts by mixing clay and fly ash in distilled water to form slurry. The process is followed by fully immersing polymer sponge in slurry. The excess slurry is then removed through squeezing. Finally, the sponge coated with slurry is sintered at 500 and 1250 °C for 1 h. It is found that the compressive strength of porous composites improves significantly (0.178–1.28 MPa) when the amount of clay-fly ash suspension mixture (50–70 wt%) increases. The compressive strength of porous composites is mainly attributed to the mullite, quartz and amorphous phase formations. These results are supported by X-ray diffraction analysis. On the other hand, increase in the amount of suspension reduces the apparent density (from 2.44 to 2.32 g/cm3) and porosity (from 97 to 85 %). The reduction in apparent density is believed to be caused by the presence of high fly ash content in porous composites. The melted fly ash cenospheres have closed the internal pores and increased density of samples. Higher suspension level not only reduces porosity, but also increases close pores of the porous composites. The results are justified through the observation from the structures of porous clay-fly ash composites. 相似文献
7.
W. H. Chan M. N. Mazlee Zainal Arifin Ahmad M. A. M. Ishak J. B. Shamsul 《Journal of Material Cycles and Waste Management》2017,19(1):1-14
Increased energy consumption due to industrial growth has increased the levels of carbon dioxide (CO2) emission being released into the atmosphere. CO2 emission is a type of greenhouse gas which is a major cause of global warming. Since the issue of CO2 emissions has drawn much attention in recent years, the development of CO2 capture technology has become a necessity. Although CO2 adsorbents are still at the early development stage, it has been suggested that CO2 adsorbents are the most effective technology in controlling CO2 emissions. Solid adsorbents have great potential as an alternative method to conventional adsorbents in adsorbing CO2. In this paper, low cost adsorbents including activated carbon, zeolites, mesoporous silica and clays are discussed in terms of adsorbent preparation methods and CO2 adsorption capacity. The low cost adsorbents are mainly derived from waste materials such as fly ash, steel slag, red mud, bagasses wastes and wood wastes. Besides that, natural resources such as clays have also been applied as low cost CO2 adsorbents. Surface modifications have also been applied to the low cost adsorbents, including metal ion exchange and amine impregnation to enhance CO2 adsorption capacity. In the last section, the current status of CO2 adsorbents is summarized and future trends are discussed briefly to predict the potential materials which can be applied as CO2 adsorbents. 相似文献
8.
Chea Chandara Khairun Azizi Mohd Azizli Zainal Arifin Ahmad Etsuo Sakai 《Waste management (New York, N.Y.)》2009,29(5):1675-1679
The present study is focused on clarifying the influence of waste gypsum (WG) in replacing natural gypsum (NG) in the production of ordinary Portland cement (OPC). WG taken from slip casting moulds in a ceramic factory was formed from the hydration of plaster of paris. Clinker and 3–5 wt% of WG was ground in a laboratory ball mill to produce cement waste gypsum (CMWG). The same procedure was repeated with NG to substitute WG to prepare cement natural gypsum (CMNG). The properties of NG and WG were investigated via X-ray Diffraction (XRD), X-ray fluorescence (XRF) and differential scanning calorimetry (DSC)/thermogravimetric (TG) to evaluate the properties of CMNG and CMWG. The mechanical properties of cement were tested in terms of setting time, flexural and compressive strength. The XRD result of NG revealed the presence of dihydrate while WG contained dihydrate and hemihydrate. The content of dihydrate and hemihydrates were obtained via DSC/TG, and the results showed that WG and NG contained 12.45% and 1.61% of hemihydrate, respectively. Furthermore, CMWG was found to set faster than CMNG, an average of 15.29% and 13.67% faster for the initial and final setting times, respectively. This was due to the presence of hemihydrate in WG. However, the values obtained for flexural and compressive strength were relatively the same for CMNG and CMWG. Therefore, this result provides evidence that WG can be used as an alternative material to NG in the production of OPC. 相似文献
9.
Eshraq Ahmed Abdullah Abdul Halim Abdullah Zulkarnain Zainal Mohd Zobir Hussein Tan Kar Ban 《环境科学学报(英文版)》2012,24(10):1876-1884
A modified hydrophilic penta-bismuth hepta-oxide nitrate (Bi5O7NO3) surface was synthesized via a precipitation method using TiO2 and Ag as modified agents. The synthesized product was characterized by different analytical techniques. The removal efficiency was evaluated using mono-and di-sulphonated azo dyes as model pollutants. Different kinetic, isotherm and diffusion models were chosen to describe the adsorption process. X-ray photoelectron spectroscopy (XPS) results revealed no noticeable differences in the chemical states of modified adsorbent when compared to pure Bi5O7NO3;however, the presence of hydrophilic centres such as TiO2 and Ag developed positively charged surface groups and improved its adsorption performance to a wide range of azo dyes. Dyes removal was found to be a function of adsorbent dosage, initial dye concentration, solution pH and temperature. The reduction of Langmuir 1,2-mixed order kinetics to the second or first-order kinetics could be successfully used to describe the adsorption of dyes onto the modified adsorbent. Mass transfer can be described by intra-particle diffusion at a certain stage, but it was not the rate limiting step that controlled the adsorption process. Homogenous behavior of adsorbent surface can be explored by applying Langmuir isotherm to fit the adsorption data. 相似文献
10.
Ali Reza Pendashteh Luqman Chuah Abdullah A. Fakhru’l-Razi Sayed Siavash Madaeni Zurina Zainal Abidin Dayang Radiah Awang Biak 《Process Safety and Environmental Protection》2012,90(1):45-55
Produced water is a significant waste stream generated in association with oil and gas production. It contains high concentrations of hydrocarbon constituents and different salts. In this study, a membrane sequencing batch reactor (MSBR) was used to treat synthetic and real produced water. The MSBR was evaluated in terms of biodegradation of hydrocarbons in the synthetic produced water with various organic loading rates (OLR) (0.281, 0.563, 1.124, 2.248, and 3.372 kg COD/(m3 day)), cycle time (12, 24, and 48 h), and membrane performance. The effects of salt concentrations at different total dissolved solids (TDS) (35,000, 50,000, 100,000, 150,000, 200,000, and 250,000 mg/L) on biological treatment of the pollutants in the synthetic and real wastewater were studied. At an OLR of 1.124 kg COD/(m3 day), an HRT of 48 h and TDS of 35,000 mg/L, removal efficiencies of 97.5%, 97.2%, and 98.9% of COD, total organic carbon (TOC), and oil and grease (O&G), respectively were achieved. For the real produced water, removal rates of 86.2%, 90.8%, and 90% were obtained for the same conditions. However, with increasing salt content, the COD-removal efficiencies of the synthetic and real produced water were reduced to 90.4% and 17.7%, respectively at the highest TDS. 相似文献