超临界萃取装置的研制及其应用

超临界流体萃取是近的上来兴起的一种新的分离技术，报道了将超临界萃取原理与回流技术相结合研制的二氧化碳回流中低压超临界流体萃取设备，解决了关键实验手段，通过应用证明设备可靠，费用低廉，有实用价值。     

ICP-MS for elemental speciation studies

The use of inductively coupled plasma mass spectrometry (ICP-MS) coupled with separation techniques for the purpose of elemental speciation has recently gained a lot of attention. Much of this is due to ever improving separation capabilities of Chromatographic techniques, the high sensitivity of ICP-MS, and the continuing development of better interface techniques. Additionally, there is a growing awareness of the need to monitor various species of an analyte, rather than just total analyte concentrations, due to their often varying natures. For the sake of learning from different elemental speciation approaches, this review brings together some selected types of elemental speciation which have been recently seen in literature. These include separations using various forms of liquid chromatography, such as reversed phase, reversed phase ion pairing, micelle, ion exchange, and size exclusion. Elemental speciation employing gas Chromatographie separations and supercritical fluid separations are discussed as well as elemental speciation using capillary electrophoresis.     

Screening of Cerebrospinal Fluid and Blood Sera of Multiple Sclerosis Patients for Oligoclonal Immunoglobulins by Capillary Electrophoresis

Summary Multiple sclerosis (MS) is an autoimmune disease characterized by the production of specific types of immunoglobulins into the central nervous system. These immunoglobulins appear as oligoclonal bands (OCBs) in agarose isoelectric focusing (IEF) of cerebrospinal fluid (CSF). Among the cases with clinically definite MS, up to 95% have oligoclonal IgG bands in their CSF. In this report, we describe a micellar electrokinetic capillary chromatography (MEKC) method for the separation of CSF and serum proteins. MEKC was performed using 25 mM borate buffer, pH 10, containing 25 mM SDS at 20 kV and normal polarity. High values of repeatability in migration times and of reproducibility in peak areas were obtained (R.S.D. values were less than 2%). Calibration graphs were linear up to 2000 mg L^–1. LOQ was 6.5 mg L^–1 and LOD determined as a signal to noise ration of 3:1 was 4.5 mg L^–1. Analysis of CSF and serum samples from patients with clinical definite MS and healthy individuals demonstrated the presence of two peaks migrating as -globulins in the CSF samples of patients. These peaks were absent from controls and the serum of the same patients. Correlation of the data obtained from IEF and MEKC analysis for 25 patients showed that the diagnostic sensitivity and specificity of MEKC were ca 89% and 92% respectively. The obtained results indicate that this MEKC method may be helpful for the diagnosis of multiple sclerosis. Capillary electrophoresis compared to flat bed IEF provides reproducible results, requires shorter analysis time, and allows direct quantitative determination.Presented at: International Symposium on Separation and Characterization of Natural and Synthetic Macromolecules, Amsterdam, TheNetherlands, February 5–7, 2003     

A comparison between different techniques for the isolation of rosemary essential oil

Traditional hydrodistillation (HD), supercritical fluid extraction (SFE), organic solvent extraction (SE), and water microwave assisted hydrodistillation (MAHD) techniques were compared and evaluated for their effectiveness in the isolation of rosemary essential oil. The microwave assisted hydrodistillation technique was optimized in terms of both delivered power and time duration. The extracts/distillates were analyzed by GC and GC-MS. Microwave distillation, which exploits the physical action of microwaves on plants, showed a series of advantages over the other approaches: low cost, use of water in sample pre-treatment step, greatly reduced isolation time, and attainment of high quality essential oil distillate. Moreover, the absence of environmental impact of this innovative technique was also emphasized.     

Serially coupled capillary columns supercritical fluid chromatography with midpoint pressure control

Two capillary columns of different polarities were coupled in series by means of a coupling restrictor. The pressure of the first column and the midpoint pressure (between the coupling restrictor and the second column) were controlled independently of each other using two pumps. The selectivity of this separation system was highly dependent on the pressure difference and could be continuously changed between those of two columns. The pressure difference could be changed even in course of separation for fine tuning of the selectivity. Several examples were shown to demonstrate the utility of this method.     

Effect of mobile phase density gradients on efficiency in packed column supercritical fluid chromatography

Summary The efficiency of packed columns was measured as a function of flow rate, temperature, outlet density, and the density differential across the column, unsing pure carbon dioxide as the mobile phase. Although density differentials are often blamed for a serious loss in efficiency in packed column supercritical fluid chromatography, the results show that efficiency was not a function of the density differential. Peak shapes suggest that apparent loss in efficiency is actually due to inadequate solubility of the solute in carbon dioxide.     

Capillary and packed column SFC/MS

A frit restrictor interface for capillary column supercritical fluid chromatography/mass spectrometry (SFC/MS) has been constructed and used for the analysis of high boiling point alkanes. Packed column SFC/MS is described using both a moving belt liquid chromatographic/mass spectrometric interface and a thermospray source in the filament-on mode.     

Quantitative analysis of delta9-tetrahydrocannabinol in preserved oral fluid by liquid chromatography-tandem mass spectrometry

A rapid and sensitive method for the analysis of delta9-tetrahydrocannabinol (THC) in preserved oral fluid was developed and fully validated. Oral fluid was collected with the Intercept, a Food and Drug Administration (FDA) approved sampling device that is used on a large scale in the U.S. for workplace drug testing. The method comprised a simple liquid-liquid extraction with hexane, followed by liquid chromatography-tandem mass spectrometry (LC-MS-MS) analysis. Chromatographic separation was achieved using a XTerra MS C18 column, eluted isocratically with 1 mM ammonium formate-methanol (10:90, v/v). Selectivity of the method was achieved by a combination of retention time, and two precursor-product ion transitions. The use of the liquid-liquid extraction was demonstrated to be highly effective and led to significant decreases in the interferences present in the matrix. Validation of the method was performed using both 100 and 500 MicroL of oral fluid. The method was linear over the range investigated (0.5-100 ng/mL and 0. 1-10 ng/mL when 100 and 500 microL, respectively, of oral fluid were used) with an excellent intra-assay and inter-assay precision (relative standard deviations, RSD <6%) for quality control samples spiked at a concentration of 2.5 and 25 ng/mL and 0.5 and 2.5 ng/mL, respectively. Limits of quantification were 0.5 and 0.1 ng/mL when using 100 and 500 microL, respectively. In contrast to existing GC-MS methods, no extensive sample clean-up and time-consuming derivatisation steps were needed. The method was subsequently applied to Intercept samples collected at the roadside and collected during a controlled study with cannabis.     

Retention in coupled capillary column supercritical fluid chromatography with lipids as model compounds

Summary We have investigated to which extent retention data, acquired on single capillary columns, can be used for predicting retention factors in a coupled column system. For this purpose we utilized a model mixture of 18 lipid components with widely different vapor pressures and polarities. The sample was chromatographed on two columns, SB-biphenyl-30 (70% methyl-30% biphenylpolysiloxane) and SB-cyanopropyl-50 (50% methyl-50% cyanopropylsiloxane). Experimental retention factors, acquired in coupled column systems with two columns connected in different order, were thus compared with values calculated from runs on each single column. The agreement between calculated and experimental values generally was better than 5% without any pressure drop correction.To study the possibility of predicting retention behavior in a wide pressure range from a limited number of experiments, we also investigated the relation between solute retention and mobile phase density. We found that all data could be fitted to second order equations, which gives the possibility to optimize the resolution with respect to pressure from a limited number of runs at different pressures.     

A two-step supercritical fluid extraction of polycyclic aromatic hydrocarbons from roadside soil samples

A two-step procedure for the supercritical fluid extraction (SFE) of polycyclic aromatic hydrocarbons from soil samples was developed. The procedure consists of a static supercritical fluid treatment in a closed extraction cell at a high temperature (T=250 or 340degreesC for 20 min) and an SFE with a solvent trapping. During the static phase, the sample is exposed to a supercritical organic solvent (methanol, toluene, dichloromethane, ACN, acetone, and hexane). The solvent penetrates particles of the matrix to substitute strongly bonded molecules and dissolves the analytes in the supercritical phase. At ambient temperature, supercritical fluids became liquid and lost their solvation abilities. Most of the analytes condense on the surface of the particles or on the extraction cell walls without forming strong bonds or penetrating deep into the matrix. Thus, the pretreatment liberates the analytes and they behave similar to those in freshly spiked samples. The common SFE with toluene-modified CO2 as an extraction fluid follows the static phase. With the use of the most suitable extraction phases (toluene, ACN), the extraction efficiency of the combined procedure is much higher (approximately100%). The results of the combined procedure are compared to the SFE procedure of the same untreated sample (difference less than 5%) and to the Soxhlet extraction. The extracts were analyzed using a GC with the flame ionization detection.