用于机械振动实时监测的光纤光栅有源传感装置

把一对中心反射波长分别为1562.11nm和1562.71nm的光纤光栅粘贴在均质、等厚、等腰三角形悬臂梁上下表面作为环形腔光纤激光器端镜，当机械振动激励自由端时，通过观测激光输出脉冲，地施加于自由端的机械振动的频率进行了实时监测；观察两光栅波长漂移量差值的变化，可在0～6.1mm的范围内判断所测振动的振幅。低于100Hz时，实验结果与实际值基本吻合。     

DISSIPATIVE SCHEMES WITH PROPERTY OF INHERITING HOMOCLINIC ORBITS FOR 2N-DIMENSIONAL HAMILTONIAN SYSTEMS

1　ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｉｓｐａｐｅｒｉｓｄｅｖｏｔｅｄｔｏｓｔｕｄｙｗｈａｔｋｉｎｄｏｆｄｉｓｃｒｅｔｅｓｃｈｅｍｅｓｏｆｔｈｅｆｏｌｌｏｗｉｎｇ 2ｎ ｄｉｍｅｎ ｓｉｏｎａｌＨａｍｉｌｔｏｎｉａｎｓｙｓｔｅｍｓｗｉｔｈｐａｒａｍｅｔｅｒｉｎｎｏｒｍａｌｆｏｒｍ ｕ=Ｊ2ｎ Ｈ ｕＴ,　　Ｈ =Ｈ(ｕ ,λ) ,(1 )ｗｈｅｒｅｕ∈Ｒ2ｎ,λ∈Ｒ ,Ｈ∈Ｃｋ+1(Ｒ2ｎ×Ｒ ,Ｒ) ,ｋ≥ 6,ａｎｄＪ2ｎ =0Ｉｎ-Ｉｎ 0 ,Ｉｎ:ｕｎｉｔｍａｔｒｉｘｏｆｏｒｄｅｒｎｈａｓｔｈｅｐｒｏｐｅｒｔｙｏｆｉｎｈｅｒｉｔｉｎｇｈｏｍ…     

电子束装置运行稳定性的测量

 为了验证电子束装置的稳定性,分别对电流波形、电压波形进行了多次测量,对二极管放电时注入腔中电子均匀性进行了探测,最后改变二极管真空度测量了泵浦氩的荧光 谱的稳定性。     

透射电镜薄样品倾转过程中的附加旋转及其计算

模拟透射电镜双倾台进行样品位向调整过程,推导出反映样品倾转前后其合成倾转轴(即共有菊池线对的法线)方向变化规律的计算公式,称为附加旋转角计算公式。指出,实现样品位向调整的双倾操作,等效于样品绕其合成倾转轴的倾转及该倾转轴绕Z轴(平行入射束方向)的旋转之和。利用双倾台对薄膜样品进行的系列倾转实验表明,由附加旋转角公式计算的附加旋转角和实测值相一致。还根据双倾操作过程导出了合成倾转角的计算公式,它可用于判断样品位向调整的准确度。     

Effects of source opacity and expansion on two-pion Bose-Einstein correlations

We examine two-pion Bose-Einstein correlations for partially coherent particle-emitting sources within quantum statistical formalism, where the sources are treated as classical currents with chaotic and coherent components. The two-pion correlation functions of the partially coherent sources contain a phase which is sensitive to the asymmetry of the source emission function. We investigate the influence of source opacity and expansion in high energy heavy ion collisions on the phase by Monte Carlo calculati...     

LaMgAl_(11)O_(19)∶Co~(2+)被动调Q铒玻璃激光器研究

综述了被动调Q铒玻璃激光器的发展概况,推导了被动调Q铒玻璃激光器输出脉冲能量、脉宽的解析表达式,数值模拟了腔内损耗与输出脉冲能量、脉宽及峰值功率的关系以及输出脉冲能量与输入抽运能量的关系。设计了一台LaMgAl11O19∶Co2 被动调Q铒玻璃激光器,实验验证了数值模拟分析结果。结果表明,腔内损耗增加将导致输出脉冲能量下降,脉宽变大,从而峰值功率降低。输入能量低于12J时,输出只有单脉冲,当输入能量大于12J时,输出会出现双脉冲。在8J的电输入下,获得了峰值功率50kW,2.7mJ的1.535μm激光输出。最后讨论了提高单脉冲能量的方法。     

Swallowtail model for predicting the global bifurcation behavior of CO oxidation reactions

Catalytic CO oxidation on platinum group metals exhibits nonlinear phenomena such as hysteresis and bifurcation.Elucidation of the nonlinear mechanisms is important for catalyst design and control of reaction routes.Previous studies have offered initial insights into the local bifurcation behavior of CO oxidation.However,since the bifurcation behavior of CO oxidation is determined by multiple parameters such as temperature,total flux,and CO fraction,it is difficult to predict the global bifurcation behavior...     

Vibration control of the finite L-shaped beam structures based on the active and reactive power flow

This paper analyzes the physical meaning of the active and reactive power flow in the finite L-shaped beams and studies the active vibration control of the structures based on the active and reactive power flow.The traveling wave approach is used to calculate the structural dynamic responses.Because the error of control force is inevitable in practical applications,the effects of the error of control force on the control results are studied.The study indicates that the error of control force has pronounced ...     

Scintillation reduction using multi-beam propagating technique in atmospheric WOCDMA system

We propose employing multi-beam propagating technology to mitigate the influence of atmospheric scintillation to the wireless optical code division multiple access (WOCDMA) system and then deduce the bit error rate (BER) formulas of systems in weak and strong scintillations,respectively.According to simulation experiment results,multi-beam propagation can improve the system performance very well compared with single-beam propagating technique.Moreover,the more beams we use,the better the performance we get.When the received optical power is-30 dBm,the BER of the system employing four beams is 5 and 1 dB lower than that of using single-beam propagating technique in weak and strong scintillations,respectively.     

Synthesis and magnetic properties of CdS/α-Fe_2O_3 hierarchical nanostructures

CdS/α-Fe2O3 hierarchical nanostructures, where the CdS nanorods grow irregularly on the side surface of α-Fe2O3 nanorods, were synthesized via a three-step process. The diameters and lengths of CdS nanorods can be tuned by changing the ethylenediamine (EDA) and Cd ion concentrations. The magnetic investigations by superconducting quantum interference device indicate that the hierarchical nanostructures have an Morin transition at lower temperature (230 K) than that of the single bulk α-Fe2O3 materials (263 ...