Influence of wetland hydroperiod on diversity and abundance of metamorphosing juvenile amphibians

Numbers of successfully metamorphosing juvenile amphibians were tabulated at three wetlands in South Carolina, U.S.A. using terrestrial drift fences with pitfall traps. A relatively undisturbed Carolina bay was studied for eight years, a partially drained Carolina bay for four years, and a man-made borrow pit for three years. Annual production of juveniles at the undisturbed Carolina bay ranged from zero to 75,644 individuals of 15 species. Fewer individuals of fewer species typically metamorphosed at the borrow pit than at the undisturbed bay, with the least numbers at the partially drained Carolina bay. Both total number and species diversity of metamorphosing juveniles at each site each year showed a strong positive correlation with hydroperiod, i.e., the number of days a site contained standing water that year. Data for one common anuran species and the most common salamander species were analyzed separately by multiple regression, in addition to the community analyses. For the mole salamander, Ambystoma talpoideum, hydroperiod was a significant predictor of the number of metamorphosing juveniles, but the number of breeding females was not. For the ornate chorus frog, Pseudacris ornata, the number of breeding females was a significant predictor of the number of metamorphosing juveniles, but hydroperiod was not. Variation in the dates of wetland filling and drying interacts with other factors to determine amphibian community structure and diversity. Either increasing or decreasing the number of days a wetland holds water could increase or decrease the number and species diversity of amphibians in and around a wetland.     

Factors influencing the potential mobility and bioavailability of exchangeable ammonium ion in dried lake sediments

Abstract

The effect of drying temperature and oxidation on the level of exchangeable ammonium ion found in sediments has been examined using samples collected from along a polluted creek and from shallow lake bays. The sediments were dried at temperatures between 20°C and 100°C (either in air or under a nitrogen atmosphere), and the ammonium ion content was extracted into 0.1 M KCl prior to analysis using an ion selective electrode. Exposure to air during the drying stage usually resulted in lower ammonium values, while increasing the drying temperature altered the amount of displaceable (i.e. available) ammonium ion extracted, generally in an upward direction. The amount detected (5–25 μ g^?1) varied between sites, and surface sediment values differed from the 10–50 cm core material results. The pH of the extracts varied with the drying temperature used, indicating that the heating process promoted some chemical changes in the test samples. The study has demonstrated that in nutrient level surveys, the analytical data produced can depend greatly on the sample preparation procedure selected. It also indicated the type of changes which could occur when dredged sediments are land dumped.     

Late Embryogenesis Abundant (LEA) proteins confer water stress tolerance to mammalian somatic cells

Late Embryogenesis Abundant (LEA) proteins are commonly found in plants and other organisms capable of undergoing severe and reversible dehydration, a phenomenon termed “anhydrobiosis”. Here, we have produced a tagged version for three different LEA proteins: pTag-RAB17-GFP-N, Zea mays dehydrin-1dhn, expressed in the nucleo-cytoplasm; pTag-WCOR410-RFP, Tricum aestivum cold acclimation protein WCOR410, binds to cellular membranes, and pTag-LEA-BFP, Artemia franciscana LEA protein group 3 that targets the mitochondria. Sheep fibroblasts transfected with single or all three LEA proteins were subjected to air drying under controlled conditions. After rehydration, cell viability and functionality of the membrane/mitochondria were assessed. After 4 h of air drying, cells from the un-transfected control group were almost completely nonviable (1% cell alive), while cells expressing LEA proteins showed high viability (more than 30%), with the highest viability (58%) observed in fibroblasts expressing all three LEA proteins. Growth rate was markedly compromised in control cells, while LEA-expressing cells proliferated at a rate comparable to non-air-dried cells. Plasmalemma, cytoskeleton and mitochondria appeared unaffected in LEA-expressing cells, confirming the protection conferred by LEA proteins on these organelles during dehydration stress. This is likely to be an effective strategy when aiming to confer desiccation tolerance to mammalian cells.     

A benign approach to the preparation of freshwater bryozoan statoblasts for scanning electron microscopy (SEM) imaging

Abstract

Several different species of freshwater Bryozoa, belonging to the genera Plumatella, Rumarcanella and Fredericella, were detected within the Northern Mallee Pipeline (NMP) system in Victoria, Australia, that required definitive identification. These organisms produce asexual buds called statoblasts, with valves composed of sclerotised chitin that bear minute micro-ornamentations of considerable taxonomical significance. Imaging and analysis of these distinctive micro-ornamentations using scanning electron microscopy (SEM) is often employed for species identification. Meticulous preparation of statoblast samples is therefore required that necessitates the removal of adhering debris, dehydration and drying—whilst mitigating specimen damage and distortion. This technical note describes an approach whereby each of these three steps have been individually designed to be as benign as possible, using mild detergent/sonication to remove debris, a gradual and gentle dehydration procedure using ethanol, and critical point drying. For the overall process, these methods are chosen to optimise control and to minimise the use of harsh and hazardous chemicals.     

Investigation on bioactive protection of the amino acids derived from LEA protein on insulin by molecular simulation

Nowadays heat-sensitive protein medicines are increasingly showing their importance in the treatment of various diseases. Their popularisation and application are meeting a great challenge because of their heat lability. In this study, human insulin as a heat-sensitive protein medicine and 66 amino acids derived from a Group 3 late embryogenesis abundant protein fragment as a complex bioactive protectant, were chosen to be investigated to determine whether these amino acids can be used to protect the insulin from denaturation due to drying. The experiments were carried out by using a replica exchange molecular dynamics (REMD) simulation and GROMACS software with Gromos96 (53a6) force field. The REMD results indicate that those amino acids can effectively prevent the reversal between hydrophilic and hydrophobic surface. Both the configurations and secondary structures of the protected insulin were preserved very well. The H-bonding and electrostatic interactions between the insulin and the protectant play key roles in the bioactive protection of insulin. These results agree well with the water replacement hypothesis. All the results prove that these amino acids are a perfect bioactive protectant for heat-sensitive protein medicines.     

Physicochemical and molecular modeling studies of cefixime–l-arginine–cyclodextrin ternary inclusion compounds

In an attempt to improve the physicochemical properties of cefixime (CEF), its supramolecular inclusion compounds were prepared with β-cyclodextrin (βCD) and hydroxypropyl-β-cyclodextrin (HPβCD) in presence and/or absence of ternary component l-arginine (ARG) using spray drying technique. Initially, the phase solubility studies revealed a stoichiometry of 1:1 molar ratio with an A_L-type of phase solubility curve. The stability constants of binary systems were remarkably improved in presence of ARG, indicating positive effect of its addition. The inclusion complexes were characterized by FTIR, XRPD, DSC, SEM, particle size analysis, and dissolution studies. Further, molecular mechanic (MM) calculations were performed to investigate the possible orientations of CEF inside βCD cavity in presence and/or absence of ternary component. In case of physicochemical studies, the ternary systems performed well as a result of comprehensive effect of ternary complexation and particle size reduction achieved by a spray drying technology.     

Photosynthetic responses and acclimation of two castor bean cultivars to repeated drying–wetting cycles

To investigate the responses of castor bean to repeated drying–wetting cycles (RDWC), morpho-physiological parameters of two cultivars (Jiaxiang 2 and Hangbi 8) were determined by a pot experiment under well-watered control and RDWC. RDWC inhibited plant growth and leaf development, decreased water loss rate (WLR), and enhanced leaf mass per area (LMA) and chlorophyll content as indicated by spectral reflectance indices for both cultivars. Photosynthesis was inhibited by progressive drought stress but quickly recovered after rewatering for each cycle. Both cultivars exhibit a similar pattern of acclimation to RDWC: (1) higher LMA and lower WLR, (2) increased photosynthetic capacity under drought stress with increasing cycle numbers, (3) quick recovery and over-compensation for photosynthesis after rewatering, and (4) increased chlorophyll content. Jiaxiang 2 shows a high capacity for water preservation under drought stress and an over-compensation for photosynthesis after rewatering compared with Hangbi 8.     

Characterization of the Physical State of Spray-Dried Inulin

Modulated differential scanning calorimetry, wide angle x-ray scattering, and environmental scanning electron microscopy were used to investigate the physical and morphological properties of chicory root inulin spray dried under different conditions. When the feed temperature increased up to 80 °C, the average degree of polymerization of the solubilized fraction increased, leading to a higher glass transition temperature (Tg). Above 80 °C, the samples were completely amorphous, and the Tg did not change. The starting material was semicrystalline, and the melting region was composed of a dual endotherm; the first peak subsided as the feed temperature increased up to a temperature of 70 °C, whereas above 80 °C, no melting peak was observed as the samples were completely amorphous. To a lesser extent, the inlet air temperature of 230 °C allowed a higher amorphous content of the samples than at 120–170 °C but induced a blow-out of the particles.     

芽孢杆菌dhs-330-021菌粉的制备及稳定性研究

目的:利用喷雾干燥工艺制备芽孢杆菌dhs-330-021菌粉,并研究菌粉的活性及稳定性。方法:以脱脂乳、海藻糖、β-环糊精和谷氨酸钠为保护剂,采用喷雾干燥(条件为:进口温度100℃,出口温度50～60℃,进样速度2～4mL/min)制备芽孢杆菌菌粉,以喷干存活率和菌粉活菌数为指标,选择最佳制备条件。结果:获得喷干保护剂配方为脱脂乳10.0%、海藻糖6.0%、β-环糊精13.0%、谷氨酸钠15.0%,喷干存活率为65.9%,菌粉活菌数为1.38×109CFU/g,存放180 d后菌粉活菌数为1.03×10~9CFU/g。结论:喷雾干燥工艺可以用于芽孢杆菌dhs-330-021菌粉的制备,获得的菌粉稳定性较好。