Developing efficient scalar and vector intensity measures for IDA capacity estimation by incorporating elastic spectral shape information

Scalar and vector intensity measures are developed for the efficient estimation of limit‐state capacities through incremental dynamic analysis (IDA) by exploiting the elastic spectral shape of individual records. IDA is a powerful analysis method that involves subjecting a structural model to several ground motion records, each scaled to multiple levels of intensity (measured by the intensity measure or IM), thus producing curves of structural response parameterized by the IM on top of which limit‐states can be defined and corresponding capacities can be calculated. When traditional IMs are used, such as the peak ground acceleration or the first‐mode spectral acceleration, the IM‐values of the capacities can display large record‐to‐record variability, forcing the use of many records to achieve reliable results. By using single optimal spectral values as well as vectors and scalar combinations of them on three multistorey buildings significant dispersion reductions are realized. Furthermore, IDA is extended to vector IMs, resulting in intricate fractile IDA surfaces. The results reveal the most influential spectral regions/periods for each limit‐state and building, illustrating the evolution of such periods as the seismic intensity and the structural response increase towards global collapse. The ordinates of the elastic spectrum and the spectral shape of each individual record are found to significantly influence the seismic performance and they are shown to provide promising candidates for highly efficient IMs. Copyright © 2005 John Wiley & Sons, Ltd.     

挤扩支盘桩极限承载力的预测

用双曲线方法对110根挤扩支盘桩的极限承载力进行预测,并与直杆桩预测结果进行对比。结果表明由于支盘桩受力性状复杂,加载前期和中期预测精度较高,后期较低,误差超过15%;支盘桩的沉降曲线出现台阶时预测值与实测值误差较大;支盘桩极限承载力的预测精度与工程地质条件和桩本身的参数密切相关,桩身参数和地质条件相同条件下各桩预测精度比较接近。总体上直杆桩的预测结果优于支盘桩。     

钻孔灌注桩后压浆作用机理与应用

通过对桩侧和桩底后压浆,可大幅度提高钻孔灌注桩单桩承载力.应用桩-土理论分析了后压浆中浆液对土体及桩体的作用,并从分析影响桩基承载力的因素出发,研究了后压浆的作用机理.在渗透率小的地层中后压浆以压密注浆为主,在渗透率大的地层中后压浆以渗透注浆为主.为避免过分压裂土层,在压浆过程中应控制灌浆压力.压浆量是影响后压浆质量和提高单桩承载力的关键因素之一.     

Analysis on Bearing Capacity of Tunnel-Type Anchorage of a Long-Span Suspension Bridge

INTRODUCTION Tunnel typeanchoragehasobviousadvantages inbearingcapacityversusinvestment(LiuandHu,1996).However,itisrarelyusedinapracticalpro jectbecauseofitsrequirementofgoodrockcondi tions.Siduhebridge(Fig.1),whichliesintheBa dongmountainsinthewestplatea…     

Uncertainty in adaptive capacity

The capacity to adapt is a critical element of the process of adaptation: it is the vector of resources that represent the asset base from which adaptation actions can be made. Adaptive capacity can in theory be identified and measured at various scales, from the individual to the nation. The assessment of uncertainty within such measures comes from the contested knowledge domain and theories surrounding the nature of the determinants of adaptive capacity and the human action of adaptation. While generic adaptive capacity at the national level, for example, is often postulated as being dependent on health, governance and political rights, and literacy, and economic well-being, the determinants of these variables at national levels are not widely understood. We outline the nature of this uncertainty for the major elements of adaptive capacity and illustrate these issues with the example of a social vulnerability index for countries in Africa. To cite this article: W.N. Adger, K. Vincent, C. R. Geoscience 337 (2005).     

生态足迹模型在山区生态可持续评价中的初步应用--以1999年北京西部山区为例

在剖析生态足迹分析法的理论基础上，进一步考虑不同消费水平对生态足迹时空变异的影响，划分农村居民和城镇居民两类不同的消费群体，分别计算各自的生态足迹，其次进一步细化模型中人均水资源足迹，从而构建生态足迹与生态容量平衡模型。根据平衡模型计算出生态盈亏，得出区域生态持续性评价结果。并以1999年北京西部山区门头沟区为例，进行模型计算和生态可持续评价，结果表明1999年门头沟区处于生态赤字状态，说明该区生态系统处于不可持续状态。在对门头沟区的初步研究基础上，指出生态足迹作为山区生态可持续评价指标的优点及当前存在的缺点。     

Why asymptotic limit of the acid dissolution capacity can lead to a sharp dissolution front in chemical dissolution of porous rocks?

The use of the asymptotic limit can greatly simplify the theoretical analysis of chemical dissolution front instabilities in fluid‐saturated rocks and therefore make it possible to obtain mathematical solutions, which often play a crucial role in understanding the propagation behavior of chemical dissolution fronts in chemical dissolution systems. However, there has been a debate in recent years that the asymptotic limit of the acid dissolution capacity (i.e., the acid dissolution capacity number approaching zero) alone cannot lead to a sharp dissolution front of the Stefan type in the acidization dissolution system, in which the dissolvable minerals of carbonate rocks are chemically dissolved by the injected acid flow. The acid dissolution capacity number is commonly defined as the ratio of the volume of the carbonate rock dissolved by an acid to that of the acid. In this paper, we use four different proof methods, including (i) direct use of the fundamental concepts; (ii) use of the mathematical governing equations of an acidization dissolution system; (iii) use of the different time scaling approach; and (iv) use of a moving coordinate system approach, to demonstrate that the asymptotic limit of the acid dissolution capacity can indeed lead to sharp dissolution fronts of the Stefan type in acidization dissolution systems on a much larger time scale (than the dissolution time scale). Our new finding is that on the reaction time scale, the condition of the conventional time derivative of porosity approaching zero alone can ensure that the acidization dissolution front has a sharp shape of the Stefan type. Copyright © 2017 John Wiley & Sons, Ltd.     

A new approach to estimate canopy evaporation and canopy interception capacity from evapotranspiration and sap flow measurements during and following wetting

Canopy interception and its evaporation into the atmosphere during irrigation or a rainfall event are important in irrigation scheduling, but are challenging to estimate using conventional methods. This study introduces a new approach to estimate the canopy interception from measurements of actual total evapotranspiration (ET) using eddy covariance and estimation of the transpiration from measurements of sap flow. The measurements were conducted over a small‐scale sprinkler‐irrigated cotton field before, during and after sprinkler irrigation. Evaporation and sap flow dynamics during irrigation show that the total ET during irrigation increased significantly because of the evaporation of free intercepted water while transpiration was suppressed almost completely. The difference between actual ET and transpiration (sap flow) during and immediately following irrigation (post irrigation) represents the total canopy evaporation while the canopy interception capacity was calculated as the difference between actual ET and transpiration (sap flow) during drying (post irrigation) following cessation of the irrigation. The canopy evaporation of cotton canopy was calculated as 0.8 mm, and the interception capacity was estimated to be 0.31 mm of water. The measurement uncertainty in both the non‐dimensional ET and non‐dimensional sap flow was shown to be very low. Copyright © 2015 John Wiley & Sons, Ltd.     

Analysis of shaft resistance of jacked piles in sands

In recent years, pile jacking has become a viable alternative installation method for displacement piles. Pile jacking produces minimal noise, vibration and air pollution during installation. In addition, it is possible, at the end of jacking, to have a good estimate of the ultimate static capacity of the pile. In this paper, the shaft resistance of piles jacked into sand is studied using one‐dimensional finite element analysis. The finite element simulations, using a two‐surface plasticity model, demonstrate the effects of relative density and confinement on the unit shaft resistance of piles jacked in sand. The impact of the number of jacking strokes on the unit shaft capacity is also assessed. Based on the numerical results, we developed equations for shaft resistance quantifying the effects of relative density, initial confinement and number of jacking strokes. Predictions using these equations are compared with data obtained from centrifuge tests and field tests. Copyright © 2010 John Wiley & Sons, Ltd.     

附有物理量和气象条件约束的光学卫星国土观测有效覆盖率评估

传统光学卫星国土观测覆盖评估建立在卫星对地理想覆盖的基础上,并未考虑卫星存储、星地数据传输、观测时长等物理量及观测区域气象因素对于覆盖性能的影响。本文针对光学遥感卫星的国土观测需求.建立国土观测有效覆盖能力评估指标体系,根据卫星数据存储能力、星地数据传输能力、卫星单圈最大观测时长、卫星观测太阳高度角等性能参数,提出了基于物理性能约束下的有效覆盖计算方法。根据气象台站历年气象数据,提出了气象约束因子的计算方法。综合考虑卫星物理性能约束与观测区域气象约束,计算光学遥感卫星对地观测有效覆盖能力。最后根据专家设计的光学遥感卫星国土观测有效覆盖能力评估指标权重,利用层次分析法(AHP)评估光学遥感卫星系统对于国土观测的需求满足程度。试验结果表明,本文方法对于国土观测有效覆盖的估算和评价结果更加精确,更接近于国土观测的实际应用需求,为对地观测有效覆盖能力评估提供了一种更为精确的可行方案。