关于Vague集的模糊熵及其构造

本文分析了Vague集的性质,给出了将Vague集变换为Fuzzy集的转换函数,并讨论了其性质。分析了关于Vague集的模糊熵的直观特性,在此基础上我们给出了Vague集的模糊熵的定义。最后给出了一个关于Vague集的模糊熵的构造方法。     

AN EXTENDED MODELING OF TIDE-WAVE MOTION

1 .　ＩＮＴＲＯＤＵＣＴＩＯＮＴｏｓｔｕｄｙｔｈｅｍｏｔｉｏｎｏｆｔｈｅｔｉｄｅ ｗａｖｅｓ,ｔｈｅｓｈａｌｌｏｗｗａｔｅｒｅｑｕａｔｉｏｎｓ ,ｉ.ｅ .ｔｈｅｖｅｒｔｉｃａｌｉｎｔｅｒｇｒａ ｔｉｏｎｏｆｔｈｅｃｏｎｔｉｎｕｉｔｙｅｑｕａｔｉｏｎａｎｄｍｏｍｅｎｔｕｍｅｑｕａ ｔｉｏｎ ,ｉｓｃｏｎｓｉｄｅｒｅｄａｓｔｈｅｇｏｖｅｒｎｉｎｇｅｑｕａｔｉｏｎｓ.Ｂｙａｂｏｖｅｅｑｕａｔｉｏｎｓｔｗｏｅｑｕａｔｉｏｎｓｒｅｌａｔｅｄｔｏｔｈｅｈｏｒｉｚｏｎ ｔａｌｆｌｕｘｏｆｔｈｅｔｉｄｅ ｃｕｒｒｅｎｔｓａ…     

土钉支护结构水平位移安全监控模型研究

国内现行规范、标准是以极限变形值作为土钉支护结构水平位移安全监测报警值 ,但没有反映工程进度影响 ,不便指导工程实践。提出“过程控制”概念 ,以反正切函数为基本形式 ,基于历史经验建立“安全时程曲线”控制模型 ,要求施工过程中实测水平位移始终处在“安全时程曲线”之下 ,以确保最终变形在某一适当的阈值之内 ,已有实测结果可以为施工方案调整提供依据。通过实际案例 ,检验模型的可行性 ,表明过程控制模型较极限变形策略更具可操作性     

Analytical general results for handoff dwell time distribution in wireless networks

1 Introduction The calling dwell time characteristic is critical for the user network planning and deployment, e.g., global system for mobile communications (GSM), as well as the next generation wireless multimedia networks, such as, the currently standar…     

ANALYSIS AND PROCESSING OF LMF－COSTAS STEPPED FREQUENCY RADAR SIGNAL

Linear Modulated Frequency (LMF) Costas Stepped Frequency Radar (SFR) signal is introduced. Its ambiguity function is derived and analyzed in detail and its feasibility is validated in theory. The scheme of the proposed signal processing is also presented. The results of theoretic analysis and simulation show that, by using the proposed signal and increasing the bandwidth of the total stepped frequency, the ambiguity sidelobe is well suppressed and the range-velocity coupling in the stepped frequency radar is also greatly weakened.     

电液同步控制筒阀在小浪底水电厂的应用

小浪底水电厂位于多泥沙的黄河干流上，水轮机活动导叶会因磨损过大而严重漏水，在水轮机的设计上必须考虑这个因素;同时，为适应混水发电，小浪底水电厂机组采用了筒阀。文中介绍了筒阀的结构特点、功能及控制原理等，并对其在现场的实际应用情况进行了分析。     

The Lazy Cook Problem, or Scheduling Two Parallel Machines to Optimize Vehicle Utilization

A cook has to prepare n cakes using an oven with two racks. According to the recipe, the i-th cake has to be baked for exactly a _i minutes. Cakes to be cooked are taken from a table and carried to the oven, and once cooked are carried back to the table by means of a trolley that can carry two cakes at a time. What is the minimum number q ^* of round trips required of the cook? This problem has application to the operation scheduling of transportation systems and to material cutting. A different problem arises according to whether the cook accepts or not to stay near the oven for awhile with the trolley. If the trolley cannot be idle at the oven, an optimum schedule with no oven idle-time always exists: consequently, the trolley schedule is trivial, and the problem is transformed into a set packing. For this case, we propose and test a heuristic method which generates all of the promising columns of the set packing, and solves the resulting problem by branch-and-bound. Instead, if the trolley can be idle at the oven for a limited amount of time, a problem arises to find an optimal schedule of the trolley: in this case we show how to use a scaling technique in order to obtain a very good feasible solution by the method above.     

聚合物冷拉过程的流函数分析

用流函数法分析了聚合物拉伸成形时，颈缩的发生和扩展过程，文中论证了采用流函数法的优越性和适用性，并将流函数法计算结果和有限元法计算结果作了对比。     

以技术进步促进蒸汽能源的节约

本文运用“软科学”一即通过建立数学模型，进行系统分析和系统优化，阐述对蒸汽管网优化运行的方法及原理，达到提高供热效率及节能降耗的目的．     

波形刃铣刀片铣削温度试验分析

进行了铣削温度试验 ,采用改进的人工热电偶法 ,利用动态数据采集系统 ,对波形刃铣刀片的铣削温度进行了采集。利用C语言和MATLAB软件对试验数据进行了分析 ,拟合出温度—时间 (T t)曲线 ,初步得到了受热密度函数 ,为温度场的可视化打下有力的基础