热分层流动计算中若干差分格式的比较

本文应用常规的守恒方程及湍流模型，对二维池内热分层流动建立了数学模型，并在Ｐａｔａｎｋａｒ的压力校正法基础上对该数学模型进行了数值计算，计算中的差分格式为乘方格式、一阶迎风、二阶迎风和ＱＵＩＣＫ。通过与实验的比较分析，建议计算应采用ＱＵＩＣＫ格式，并在进行风格独立性试验的基础上使用加密网络。     

Effects of Surface Morphology and Composition Modification on Spectral Emissivity and Thermal Diffusivity Profile at High Temperatures

A new all-spectroscopic method for depth-resolved thermal diffusivity measurement of metallic specimens has been demonstrated. The method entails measurement of the mass entrained into a laser-produced plasma (LPP) plume in such a manner that the plume is representative of the specimen in elemental composition. Both the abundance of matter and its elemental composition are measured by time-resolved spectroscopy for each LPP plume. In order to delineate the morphology versus composition basis of the depth dependence, a new study on a Nichrome ribbon specimen heated by ohmic heating in a vacuum is presented. A set of depth-resolved thermal diffusivity measurements is carried out, while noting the attendant changes in the spectral emissivity and elemental composition at succeeding ablation layers. Additional measurements are carried out after the specimen has been treated under varying heating conditions. Preferential diffusion of chromium at high temperatures has been found to contribute to the dynamics of surface thermophysical properties at high temperatures. Representative LPP ablation is well suited for removal of surface impurities prior to thermophysical property measurements by the pulse heating technique.     

地下水热量运移模拟的BEM-FAM耦合法

基于地下水热量运移的基本原理，本文提出了求解地下水热量运移问题的BEM-FAM耦合法。该方法原理简单，操作方便；不仅可以直接计算出地下水流速度，而且避免了对流扩散方程数值解中的数值弥散和数值振荡，提高了计算精度。应用本文提出的方法对溪洛渡水电站工程地下水热量运移问题进行了模拟，计算结果与地质分析的结论一致，表明该方法是可行的。     

Superconductivity and magnetism in niobium doped YBa2Cu3O7 Related high Tc ceramics

Magnetic characterization has been performed on the members of the cuprateniobate RBa₂Cu₂NbO₈ (R = Pr, Nd, and La) series and R_1.5Ce_0.5Sr₂Cu₂NbO₁₀ (R = Pr, Eu, Nd, and Sm) series. The PrBCNO samples show a signature in the magnetization of a magnetic ordering at 12K. The PrCSCNO sample is nonsuperconducting and shows two distinct orderings at 17K and 53K. No such magnetic phase transition is observed down to 2K in the Nd and La based RBCNO materials or the Nd, Sm, and Eu based RCSCNO materials. Measurements of the lower critical field curve, dc irreversibility line, and critical curent densities are reported for each of the superconducting NdCSCNO, SmCSCNO, and EuCSCNO compounds.     

DS18B20在大功率激光二极管恒温制冷系统中的应用

本文介绍了利用数字式温度传感器 ＤＳ１８Ｂ２０构造大功率激光二极管恒温制冷系统的方法．该系统利用ＤＳ１８Ｂ２０作为温度传感元件，单片机作为核心控制部件控制半导体制冷器对大功率激光二极管进行制冷和制热．该系统具有体积小、外围电路简单、温控精度高等特点，温控精度可达±０．１℃．     

彩色PDP用玻璃基板

本文讨论了彩色ＰＤＰ现用钠钙玻璃的热稳定性，指出由于这种玻璃在热处理过程中易变形和收缩，因而不适合作大面积彩色ＰＤＰ基板材料，介绍了彩色ＰＤＰ基板玻璃的制造方法和特点。最后介绍了日本旭硝子公司和美国康宁公司各自为彩色ＰＤＰ新开发的玻璃基板材料ＰＤ２００和ＣＳ２５。     

Thermal Stability of Some Metabolically Conjugated Potential Precursors of Flavor Components in Meat and Milk

The stability of selected metabolic conjugates (phenylphosphate, phenylglucuronide, naphthylglucuronide, and naphthylsulfate) was evaluated in model systems. Phenylphosphate was less stable than the glucuronides and the sulfate, especially under neutral (pH 6.8) and acidic conditions (pH 1.5). Phenylphosphate was completely degraded after 1.7 hr at 100°C, and after 0.3 hr at 150°C at pH 6.8. The glucuronide and sulfate conjugates were especially stable under neutral conditions (pH 6.8) requiring > 5 hr for complete hydrolysis at 100°C. All conjugates were quite stable to hydrolysis under alkaline conditions (pH 11). The presence of certain organic solvents (ethyl acetate or ethyl ether) caused rapid hydrolysis of conjugates under very mild conditions (40°C for 30 min). This information may improve under-standing of flavor production from animal products.     

4，4＇－二苯醚二甲酸改性PET的热性能研究

采用示差扫描量热和热重分析的方法对合成的不同４，４＇－二苯醚二甲酸（ＯＢＢＡ）含量的共聚酯的热性能进行了研究。结果发现共聚酯的熔点和热结晶温度与ＰＥＴ相比有所降低；而冷结晶温度则升高。随着ＯＢＢＡ添加量的增加，在恒温热重分析中热失重速率常数减小；在升温热重分析中，热失重活化能则增加。所有的实验结果皆表明，芳族醚键的引入对提高共聚酯的热性能有重要作用。     

全液压稠油热力开采过程井下流体的传热

针对稠油黏度高、密度大、驱替效率低,常规方法开采困难等问题,开展了稠油开采装置研究。介绍了全液压稠油开采装置在原油开采过程中的加热功能,分析了采油装置系统井下流体流动及传热过程。结合理论研究方法和热力学计算,建立了井下流体热交换的物理和数学模型,并对模型进行了分析、矫正和求解。以实际油井参数和液压油的流量、温度为输入参数,通过计算机仿真模拟了井下热交换参数之间的关系,从而改进了已获得的热交换理论方程和模型,并得出了原油的产量与液压油的输入量之间的关系,以及保温提采原油所需要的最小液压油输入量。该模型的建立为进一步研究不同井况和不同输入状态下的流体传热提供了理论依据。