Filling and solidification of TiAl melt in centrifugal field

A model was established based on the combination of the equation of continuity, the equation of conservation of momentum and the equation of general energy to describe the filling and solidification of TiAl melt by permanent mold centrifugal casting. The model was solved numerically and the filling and solidification processes in the centrifugal field were discussed. The results indicate that the centrifugal field essentially influences the filling and solidification processes of TiAl melt. The melt will first fill the cavity along the back boundary until it reaches the end. After the end is fully filled, the whole cavity will be filled gradually by the way that free surface of the melt moves towards the entrance, hence the entrance is the last part to be filled. Furthermore, the mechanism by which internal defects can be formed in centrifugally cast TiAl components were interpreted.     

消失模铸造充型过程的模拟方法

通过分析消失模铸造充型过程的特点，提出了一种消失模铸造充型过程的计算模型，并用人工神经网络算法计算了充型过程中不同时刻液态金属-模样界面的位置．模拟计算结果与实际测试结果无论在充型形态还是充型时间上都符合得较好．     

铝液充型过程计算机可视化技术研究

采用透明的耐高温石英玻璃观察窗,观察和记录铝液充型过程的图像信息,分析铝液的充型过程;以图像处理技术和计算机技术为基础,通过充型过程铝液自由表面的边缘检测及提取技术,获取液体充型的自由表面曲线,定量分析铝液充型过程的自由表面变化;定量分析的试验结果表明,铝液实际充型过程自由表面的变化对浇注系统设计的合理性具有一定的指导意义.     

铸铁件消失模充型速度的测试及计算

使用计算机数据采集系统测试了铸件消失模充型过程中负压度、模样密度、浇注温度、金属静压头等工艺因素对充型速度的影响规律。通过多元线性回归，给出了充型速度的经验计算公式，并对公式进行了验证。     

粉煤灰填充尼龙6浇铸制品的研究

将粉煤灰用硅烷偶联剂处理后填充到尼龙6浇铸制品(MC尼龙)中,可以改善制品的吸水性、收缩率及热稳定性等,还可以降低成本。该项研究结果有很大的实用价值。     

注射充模过程的压力求解方法及其比较

提出了一个LU局部分解方法来求解注射充模过程的压力方程,并与其他迭代方法进行了比较。LU局部分解法是当矩阵在逐渐变大时,保留已经分解的部分,只对新增加的部分进行分解,因此相当于只对最后的稀疏矩阵进行了分解。计算表明,LU局部分解法比预条件共轭梯度法快大约1个量级,而预条件共轭梯度方法又比超松弛迭代法快大约1个量级。     

注塑流动与传热分析的自适应隐式控制体积法

在注塑流动与传热分析中采用自适应隐式控制体积法,利用自动控制的参数识别方法来自动调节时间步长,在每个时间步长流动将向前推进大约半个单元大小的距离,厚度方向的温度采用契比雪夫配点法进行计算,压力方程的求解方法是预条件共轭梯度法。计算结果表明,自适应隐式控制体积法的时间复杂度是结点数目的平方,而且1h之内可以求解10000结点规模的问题。     

尿素包合法分离橡胶籽油中的多价不饱和脂肪酸

用尿素包合法从橡胶籽油混合脂肪酸中分离多价不饱和脂肪酸 ,用正交设计实验法对分离工艺进行研究 ,其最佳分离条件是 :原料配比为m(混合脂肪酸 )∶m(尿素 )∶m(乙醇 ) =1 0 0∶1 5∶1 8,回流时间 12 0min。经一次尿素包合法分离即可得到多价不饱和脂肪酸质量分数大于90 %的产品 ,实验收率大于 35 %     

Association of seed size with genotypic variation in the chemical constituents of soybeans

Ten soybean genotypes grown in 1992 with seed size ranging from 7.6 to 30.3 g/100 seeds and maturity group V or VI were selected and tested for oil and protein content and for fatty acid composition. In these germplasm, protein varied from 39.5 to 50.2%, oil, 16.3 to 21.6%, and protein plus oil, 59.7 to 67.5%. Percentages of individual fatty acids relative to total fatty acids varied as follows: palmitic, 11.0 to 12.8; stearic, 3.2 to 4.7; oleic, 17.6 to 24.2; linoleic, 51.1 to 56.3 and linolenic, 6.9 to 10.0. Seed size showed no significant correlations with individual saturated fatty acids, protein or oil content. However, significant correlations were found between seed size and individual unsaturated fatty acids: positive with oleic, and negative with linoleic and linolenic. Oil and protein content were negatively correlated with each other. Among the major fatty acids, only the unsaturated were significantly correlated with each other: negative between oleic and linoleic or linolenic, and positive between linoleic and linolenic. A subsequent study with soybeans grown in 1993 generally confirmed these findings. Variation in relative percentages of unsaturated fatty acids andr values for most pairs of relationships were even higher than those obtained from the 1992 crop. Presented at the 85th AOCS Annual Meeting and Expo, Atlanta, Georgia, May 8–12, 1994.     

一种新型偶联剂的应用研究

研究了新型偶联剂(XOL-4)用于不同填料的效果。选用滑石粉、CaCO_3、SBS三种不同类型的填料,以不同用量的XOL-4进行表面处理来填充树脂,考察了所得填充体系的拉伸强度、弯曲弹性模量、热变形温度等性能,同时与钛酸酯偶联剂和铝酸酯偶联剂进行了比较。