Monitoring of CdTe atomic layer epitaxy using in-situ spectroscopic ellipsometry

Atomic layer epitaxy or ALE has proven to be useful for the growth of epitaxial layers of high uniformity, good quality, and well-controlled thickness. In this study, we have carried out in-situ monitoring during the atmospheric pressure ALE of CdTe on GaAs (100) substrates using spectroscopic ellipsometry (SE). The susceptor temperature, reactant partial pressures, as well as the flow and flush duration for each precursor are crucial process variables for ALE growth. Growth was carried out for 20–25 cycles under different sets of these process conditions during the experiment and in-situ SE was used to verify the presence of layer-by-layer growth, which enabled the quick determination of the process window. We observed ALE growth of CdTe at 300°C, supporting the explanation that the growth of CdTe occurs via a surface catalyzed decomposition of the Te precursor di-isopropyltelluride (DIPTe). Investigation of ALE mode growth behavior for different susceptor temperatures and DIPTe flush times indicated that the growth was limited by competition between desorption and reaction of the adsorbed DIPTe species on the Cd terminated surface.     

格栅式水泥搅拌桩支护在西涌泵站的应用

简介水泥搅拌桩的支护机理,以西涌泵站为例介绍采用格栅式水泥搅拌桩作支护结构的设计及计算方法,指出该技术能较好地解决软湿粘性土地区枢纽深基础开挖问题.     

Kinetics of TSCD zinc oxide nano-layer growth by modified diffuse-interface model

Deposition of zinc oxide films from aqueous solutions containing complex Zn²⁺ ions on soda-lime substrates were studied by two-stage chemical deposition (TSCD) process. It was shown that the film thickness can be controlled by the number of dipping stages. Nano-layers were produced with less than nine times dipping stages. Greater dipping numbers resulted in film thickness exceeding 100 nm. The growth rate obeyed double-stage zeroth order with respect to the concentration and first order with respect to the temperature. This rate was proportional to the difference between the temperature of the hot water and the substrate. Overall activation energy of 17.20 ± 0.42 kJ mol⁻¹ and frequency factor of 2.81 ± 0.07 μm s⁻¹ was determined for ZnO deposition. These values were attributed to two resistances. One resistance corresponded with film heat transfer mechanism. The other was attributed to species attachment to the solid substrate. A modification to the diffuse-interface kinetic model was devised for explanation of the latter. EDAX (electron dispersive elemental analysis), XRD (X-ray diffraction) and SEM (scanning electron microscopy) were used to characterize the layer formed. These methods showed that the product consisted solely of pure elliptical ZnO grains.     

临盘油田分层注水管柱有效率影响因素分析

分层注水管柱有效率低一直是困扰临盘油田开发生产的一大难题。针对这一现状，在分析油藏结构、施工工艺和现场资料的基础上，分析了影响分层注水井管柱有效率的因素，阐述了封隔器、工艺操作、管枉自身及温度等制约分层注水管柱有效率提高的原因，并提出了相应的对策和措施。     

A Study of Surface Deformation during Wire‐Rod Rolling of High Speed Steels using Experimental and Computational Techniques

The evolution of surface defects during shape rolling of high‐speed steel billets is studied using longitudinal surface defects prepared by machining and welding. The reduction of the defects during rolling in a production mill is compared to the total area reduction of the billets. Samples are collected after pass 4, 6, 8, 14, 19 and the final pass, 28, representing the finished 5.5mm wire. By inspecting the cross sections, the rotation of the billets from pass to pass is evaluated. Results from FE simulations on solid billets are compared to the experimental results. Generally, simulations predict less reduction than observed experimentally. In most cases cracks reduce most effectively followed by carbon steel welds and stainless steel welds.     

Antiwear Action of Mineral Lubricants Modified by Conventional and Uncoventional Additives

The authors of this paper investigated the influence of esters of rapeseed oil fatty acids on the lubricating properties of mineral lubricants containing chosen AW/EP additives. Methyl esters, ethylene glycol esters, and glycerol esters as well as some commercial AW/EP packages based on zinc dialkyldithiophosphate, S–P organic compounds, and sulphurized esters of fatty acids were tested. The tribological tests were carried out with the use of a four-ball machine. Antiwear (AW) properties of tested compositions were determined using their limiting load of wear (G_oz(40)). It appears that the AW action of esters of rapeseed oil fatty acids depends on their structure. The best AW action is shown by compositions of mineral oil lubricants containing AW/EP additives and methyl esters of rapeseed oil fatty acids. The SEM/EDS analysis of the scar surface layer indicated that the presence of these esters in lubricants causes a change in the interaction between AW/EP additives and the metal surface. These observations were confirmed by the XPS surface analysis.     

甲壳素纤维/毛/绒双层织物的设计

通过分析甲壳素纤维各项性能,将其引入山羊绒产品中,对双层织物的设计进行探讨,并经过纺纱和织物试制,提出了设计与生产中应注意的问题,开发出了具有永久抗菌性的表层为羊绒、里层为甲壳素与改性羊毛混纺的系列产品.     

沥青混凝土面层施工的质量控制

从原材料的控制、配合比设计控制、施工阶段控制三方面探讨了热拌沥青混凝土面层的施工,重点对施工阶段的控制进行了详细阐述,以提高行车的安全性、舒适性及路面使用的耐久性等,从而延长路面的使用寿命。     

服装与热舒适

本文参阅国内外研究成果，对服装环境、服装材料、服装穿着与人体热舒适关系的有关问题进行了分析，认为热舒适对作业者的身心健康、对提高其工作效率有着重要意义。     

InGaAs（P）分别限制应变单量子阱激光器的优化设计

针对较常用的ＩｎＧａＡｓ（Ｐ）分别限制应变单量子阱激光器，给出了为得到最大净增益的优化设计参数。对于激射波长为１．５５μｍ的无应变激光器，最佳的光限制层波长为１．２４μｍ，厚度为１００ｎｍ。当阱材料引入压缩应变后．由于价带的有效状态密度减小，量子阱激光器的微分增益变大，阱深的增大对增大线性增益的效果更加明显．所以最佳光限制层的波长将变短，为１．２０μｍ