Mn含量对Mg2Ni型合金相形成及放电性能的影响

采用按比例混合合金粉末压制成圆柱试样，然后用低温烧结和随后机械球磨的方法制备了非晶态的Mg2Ni型合金。研究了烧结和球磨对不同Mn含量的Mg2Ni型合金的相形成过程及电化学性能的影响。实验表明：在Mg2Ni中采用第三组元Mn对Mg进行适量的替代后，通过烧结及球磨方法可以获得均匀的非晶相；微量替代可有效地提高其放电容量：随替代量的增加，合金最大放电容量和高速放电能力降低，而充放电循环稳定性提高。     

Heat capacity of liquid and undercooled liquid metals and alloys

Trends in the dependences on temperature and concentration of experimentally determined heat capacities of liquid and undercooled liquid metals and alloys are discussed. A new adiabatic calorimeter for determining the heat capacity of liquid alloys up to 1500 K is described. The ability of several approximations and models to describe the different characteristics of the heat capacity of liquid and supercooled liquid metals and alloys is demonstrated.     

工序能力评价与经济分析

通过对工序能力的分析与评价 ,工序能力并非越高越好 ,提高工序能力有时意味着增加成本 ,故应作经济分析 ,本文介绍了一种经济分析的方法。     

Thermal analysis of polymer–water interactions and their relation to gas hydrate inhibition

Gas hydrates formed in oil production pipelines are crystalline solids where hydrocarbon gas molecules such as methane, propane, and their mixtures are trapped in a cagelike structure by hydrogen‐bonded water molecules to form undesirable plugs. Methanol and glycol are currently used to prevent these plugs via thermodynamic inhibition. Small amounts of water‐soluble polymers may provide an alternate approach for preventing gas hydrates. In this study, we expand the fundamental understanding of water–polymer systems with differential scanning calorimetry. Nonfreezable bound water was used to quantify polymer–water interactions and relate them to the chemical structure for a series of polymers, including acrylamides, cyclic lactams, and n‐vinyl amides. For good interactions, the water structure needs to be stabilized through hydrophobic interactions. An increased hydrophobicity of the pendant group also appears to favor polymer performance as a gas hydrate inhibitor. Good inhibitors, such as poly(diethyl acrylamide) and poly(N‐vinyl caprolactam), also show higher heat capacities, which indicate higher hydrophobicity, than poor performers such as polyzwitterions, in which hydrophilicity dominated. The phase behavior and thermodynamic properties of dilute polymer solutions were also evaluated through measurements of the heat of demixing and lower critical solution temperature. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2642–2653, 2007     

Synthesis of Dimethyl Carbonate from Methanol and Carbon dioxide using Potassium Methoxide as Catalyst under Mild Conditions

Pd-supported on WO₃–ZrO₂ (W/Zr atomic ratio=0.2) calcined at 1073 K was found to be highly active and selective for gas-phase oxidation of ethylene to acetic acid in the presence of water at 423 K and 0.6 MPa. Contact time dependence demonstrated that acetic acid is formed via acetaldehyde formed by a Wacker-type reaction, not through ethanol by hydration of ethylene.     

常温脱氯剂与HCl气体反应动力学的研究

在固定床反应器中研究了自制的铁系常温脱氯剂与HCl气体的反应动力学,导出了计算脱氯剂氯容的动力学方程q=0.309[(exp(0.036t))/(exp(0.036t)+exp(61.9Z)-1)]×100%.根据该方程,可以计算各个时刻、床层不同深度处脱氯剂的氯容,从而判断脱氯剂的性能及其使用寿命.     

分子蒸馏过程模型化研究进展

介绍了分子蒸馏基本原理和常用分子蒸馏设备 ,系统地对分子蒸馏过程模型化的研究进展情况进行了叙述 ,重点介绍了蒸发系数法、液体内部传质传热和蒸馏区惰性气体压力对分子蒸馏的影响等方面的研究结果 ,并对其进行了评述 ,同时对分子蒸馏过程研究的进一步发展提出了一些展望。     

Effect of additives on formation of natural gas hydrate

The formation of natural gas hydrate (NGH) is studied in this work. Kinetics data of hydrate formation with no agitation were collected at various concentrations of the aqueous solutions with different additives such as alkylpolyglucside, sodium dodecyl benzene sulfonate and potassium oxalate monohydrate. Various kinds of additive increased the formation rates of NGH and its storage capacity and reduced the induction time of NGH formation. Moreover, the storage capacity, the induction time and the hydrate formation rate were influenced by the concentration of the aqueous solution.     

大液相负荷下斜孔塔板的流体力学性能

针对大液相负荷气液传质操作 ,通过冷模实验 ,重新确定了普通斜孔塔板的液体力学性能 ,并给出了新的关联式。同时基于普通正排斜孔塔板在大液量操作条件下压降大 ,泄漏和雾沫夹带严重等缺点 ,沿用梯形导向浮阀的思想 ,提出了变正排为斜排的改进方案 ,并在相同条件下对两者的液体力学性能进行初步比较。证明了斜排斜孔塔板是一种适合大液体处理量且操作弹性较宽的塔板     

墩头超长实用堰泄洪安全分析及模型试验验证——以缅甸DAPEIN(Ⅰ)水电站工程为例

以缅甸DAPEIN(Ⅰ)水电站工程为例,论述了将WES实用堰的闸墩墩头向上游超长延伸之后,对泄洪安全所造成的影响。针对WES实用堰流量系数、堰面动水压力容易受边界因子影响的特点,对设计断面的堰顶布置和墩头形状进行了优化。根据堰面空化数计算公式及水流特性推导出计算的关键部位,对空化数进行计算。采用几何比尺为1∶60的物理模型对溢流堰的泄流能力和堰面动水压力进行了试验测试。试验结果表明:溢流堰的模型试验泄流能力和设计泄流能力非常相近。堰面动水压力除工况2的B4测点出现了-1.2 k Pa的微小负压值外,其余堰面时均压强值均大于0。从而,在泄流能力和堰面动水压力两方面都验证了这种设计方案的合理性。该工程所遇到的结构布置问题在中低溢流坝工程中属常见问题,解决思路可为今后类似工程建设借鉴参考。