钢管内外表面喷砂除锈半自动生产线设计

介绍了钢管内外表面喷砂除锈生产线的主要设备、工艺流程及主要参数,电气系统总体方案设计和程序设计。用可编程序控制器控制钢管内表面喷砂除锈作业线,提高了自动化程度,操作方便,运行可靠,并给出了自动控制程序顺序功能图。本生产作业线实现了钢管内外表面的半自动喷砂处理,提高了产品质量,改善了工作环境。     

钢筋网焊机自动生产线的实时控制

在网焊机自动化生产线的研制中,由于点焊控制器、自动上料机构中焊点总数多、驱动路数多、网格间距小、运行速度快,因而对控制系统的实时性提出了较高要求,用工控机与单片机、PLC组成的网焊机控制系统,在软、硬件实现上采取多种方案有机结合,实现了网焊机生产线的高速实时控制。     

可编程序控制器PLC的抗干扰措施

对可编程序控制器系统常见的一些干扰现象进行分析，对不同的干扰采用了相应的防护措施。     

Evaluation of a proper controller performance for maximum-power point tracking of a stand-alone PV system

In this paper the implementation of a suggested stand-alone PV system, for maximum-power point tracking (MPPT), is carried out. Also, this paper presents a comparative study, through experimental work, between the conventional PI controller and the fuzzy logic controller (FLC) under different atmospheric conditions. The implemented system with both the PI controller and the FLC gives a good maximum-power operation of the PV array, but the tracking capability for different optimum operating points is better and faster for the case of using the FLC compared to the case of using the PI controller.     

运用PLC技术改造385m~2凯利式叶滤机控制系统

根据生产实践 ,结合PLC的技术特点和 385m2 凯利式叶滤机的电气联锁特性 ,阐述了应用PLC技术 ,可进一步提高 385m2 凯利式叶滤机的运转率和自动化水平。     

一种基于GE90-30PLC的飞剪自动控制系统

本文介绍了调整线材轧线精轧机前专用于切头的启停式飞剪的自动控制系统。该系统以GE90—30PLC为控制核心，辅以热金属HMD、光电编码器等元件，能很好地完成飞剪的剪切及定位。其中着重阐述了飞剪控制中各个重要参数的计算原理和方法。     

AT91SAM7S64芯片I2C(TWI)接口应用开发

较为详细地介绍AT91SAM7S64芯片的I2C接口控制器中外围数据控制器(PDC)的使用方式,并将其与AT24C04之间的通信作为实例给出完整的应用开发流程和软硬件详细描述。该方法的可行性已经为工程实践和实际产品所证实。该操作也可推广到其他AT91SAM7S系列ARM处理器与其他I2C接口器件间的通信。并对其他拥有外围数据控制器的接口开发有一定的借鉴意义。     

PLC和变频器在空压机节能改造中的应用

针对空压机能耗大，噪音大，自动化程度低等缺点，提出利用可编程控制器和变频嚣实现对螺杆式空压机的节能改造方案。实验结果表明，该方案自动化程度高，节能效果明显，具有很大的实用价值。     

基于MPEG—2文件的合并

本介绍了具有相同音频、视频编码方式的MPEG2节目流如何合并成一个节目流。合并后的件播放流畅并且时间显示正确。它包括PAT PMT表的重写，系统头部分相关字段的更改，PCR值的修改，解码时间标签（DTS），显示时间标签（PTS）的重新确定，传送速率的修改以及添加相应的空包。     

Vibration control of a flexible structure using a hybrid mount

This paper presents vibration control of a flexible beam structure using a hybrid mount which consists of elastic rubber and piezoelectric stack actuator. After identifying stiffness and damping properties of the rubber and piezoelectric elements, a mechanical model of the hybrid mount is established. The mount model is then incorporated with the beam structure, and the governing equation of motion is obtained in a state space. A sliding mode controller is designed in order to actively attenuate the vibration of the beam structure subjected to high-frequency and small magnitude excitations. The controller is experimentally realized and measured control responses such as acceleration of the beam structure and force transmission through the hybrid mount are evaluated and presented in both frequency and time domains.