水量还原方法及合理性检查

文中详细地阐述了取河水、井水、水库水、跨流城引(排)水等不同情况进行还原的具体方法步骤。并对水量还原成果提出合理性检查措施。     

Understanding the differences between how novice and experienced designers approach design tasks

Research was undertaken to understand how to provide the most appropriate support for novice designers in engineering design. However, how designers apply their experience and knowledge is not understood and further research in this area is required. This paper describes an observational study to understand how novice and experienced designers approach design tasks. Electronic Publication     

Micro assembly injection moulding

Injection moulding is established as one of the most common manufacturing processes of thermoplastics due to its high degree of automation and the short cycle times. Micro injection moulding is a rapidly growing technology that allows for the efficient production of very complex micro parts in high series. The “Market Analysis for Microsystems II 2002–2005” of the Nexus Task Force anticipates a yearly growth in the field of micro system technology of about 20% (Wechsung et al. 2002). This study identifies in addition to the continuous miniaturization the growing use of polymers in micro systems (Schneider et al. 2001). No other material group offers this wide range of material properties and permits to choose processing parameters and application properties according to necessities (Gächter 2000). While the production processes of micro technical components are mainly controllable, the assembly of these components to hybrid micro systems is a bottleneck to the industrial large scale production. The assembly itself represents a large fraction of the added product value and gains in importance with growing complexity and miniaturization of the systems.     

黄河口河道演变规律探讨

通过分析黄河口河道在纵剖面、横断面、河型等方面的演变过程,总结归纳出黄河口河道的演变规律。指出:黄河口泥沙在潮汐涨落等因素影响下,河口河道纵剖面逐渐形成台阶状,与此同时,河口滩地横比降逐渐发展为倒比降;河口河道中段由顺直型河道逐渐转为弯曲型河道,而下段仍为相对顺直、游荡型河道。当河口河道中段比降减小到一定程度后,此河段开始漫滩、卡冰、出汊。河口台阶的形成揭示了黄河口流路由单股河道逐渐转为出汊的过程,即黄河口流路由“青壮期”逐渐转为“衰亡期”的过程。延长黄河口流路使用年限的途径是:①尽量减少黄河下游输向黄河口的泥沙量;②采取河口挖沙或人工改汊措施,地点宜选在河口河道的中下段。     

中扬子及邻区层序地层与原型盆地演化

中扬子及邻区原型盆地可划分为 9个大层序,其中,1～6大层序由中、古生代海相地层组成;第 7大层序为早、中侏罗纪的陆相沉积;第 8大层序为晚侏罗世的前渊沉积;第 9层序为晚白垩世至第三纪的伸展盆地。震旦纪,中部地区为台地相环境,向南为浅海陆棚环境,向北以陆表海为主;寒武纪至早奥陶世为典型的大陆边缘盆地;中、晚奥陶世至志留纪为裂谷盆地发展阶段;泥盆纪至石炭纪该区发生广泛海侵,与华南海域和太平洋海域多处相连;二叠纪至早、中三叠世为原型盆地的重要转型时期,随着分隔秦岭微板块与扬子板块的勉略古洋盆向东打开,扬子北缘由前期的区域性隆起转变为向北加深的大陆边缘盆地;晚三叠世经历了两次幕式旋回,巴东组沉积时期盆地沉降缓慢,九里岗组沉积时期则较快;早、中侏罗世原型盆地早幕 (早侏罗世)沉积缓慢,晚幕 (中侏罗世)快速沉降,以水下沉积作用为主;晚侏罗世可划分为两大构造演化阶段,早期构造活动相对平静,晚期强烈;晚白垩世至老第三纪,盆地范围缩小,以湖泊、河流体系为主。由此,中扬子及邻区在地质历史时期经历了 4种不同性质的原型盆地,具有幕式充填特征。     

韩江三角洲海岸变迁遥感调查研究

利用1:10万TM影像，对广东东部韩江三角洲地区的海岸变迁及河道演变进行了调查研究。划分了不同时期的海岸界线和古河道遗迹，提出韩江三角洲的形成是河流动力和海洋动力共同作用的结果，对研究历史海平面变化及环境演变具重要意义。     

准噶尔盆地侏罗系储集层的基本特征及其主控因素分析

从描述储集层基本特征、分析储集层性质的主控因素、建立储集层成因模式和评价、预测储集层性质这 4个层次 ,研究准噶尔盆地重点勘探目标区的侏罗系储集层。系统总结侏罗系储集层岩石学特征 ,认为成岩压实作用强弱是控制储集层性质的关键因素 ;指出相对优质储集层均为剩余原生粒间孔隙型储集层 ,溶蚀作用对渗透率贡献小 ;非煤系储集层的孔隙保存条件明显比煤系储集层好 ,这是三工河组、头屯河组和吐谷鲁群的物性普遍优于八道湾组和西山窑组的原因。在确定储集层性质的控制因素和控制机理基础上 ,建立了煤系和非煤系两大类储集层的成因 演化模型。在上述研究的基础上 ,分地区、分层位评价了储集层 ,并预测了不同渗透率储集层的深度界线及相对优质储集层的平面分布。图 6参 10     

构造作用对油气生成和运聚的影响

有机质从埋藏开始，就处于极其复杂的地球物理化学场中，环境提的能量，一是热量，二是机械能，机械能，主要是通过机械力作用传递给系统的，另外还以机械波的形式赋予系统一定的机械能。当发生断褶构造运动时，机械力对油气运移的影响尤为突出，它经能量的迁移转化，促成了包括机械力降解和地应力驱动等一系列的连锁反应，制造了一次次高效的成油（生运）事件，本文以突变论为着眼点，按照改造控制建造的思路，大胆提出构造运动制造生排烃事件，成就含油气系统的假说。     

指针推进移动性管理策略中指针链长度的概率

为了降低移动通信网络中位置跟踪操作的代价,指针推进策略被提出.显然,指针链长度的确定对这一策略的有效应用是至为重要的.已有论文假定移动台在位置区的逗留时间服从指数分布的条件下,对指针链的长度进行研究,但指数分布的特殊性,限制了其研究结果的应用.本文推广了上述结果,研究了移动台在位置区的逗留时间服从一般概率分布的指针推进策略,通过构造向量马氏过程,利用密度演化方法,导出了指针链长度的概率公式,这个公式可用于对各种指针推进策略性能的评价.     

Electrocatalysis of chlorine evolution on different materials and its influence on the performance of an electrochemical reactor for indirect oxidation of pollutants

Two different Ti/Pt–Ir materials (commercial and home made) and Ti/PdO + Co₃O₄ were investigated for their electrocatalytic properties versus Cl₂ evolution reaction. The materials were used in a batch electrochemical reactor to treat biologically recalcitrant di-azo compound. An electrochemically driven oxidation, mediated by a Cl₂/Cl⁻ couple, proved efficient for destruction of this complex organic molecule, causing cleavage of the conjugated double bonds and destruction of unsatured bonds. Both Ti/Pt–Ir materials performed well; lower kinetics obtained with the Ti/PdO + Co₃O₄ anode was caused by adsorption of the model compound, evidenced in preliminary voltammetric measurements. The dye oxidation reaction followed the second order kinetics with partial orders in the model compound and (time varying) chlorine concentrations equal to one. Specific energy consumption of 3.12 kWh m⁻³ proved the process more economic than the homogeneous phase oxidation.