钨尾矿微晶玻璃的形状记忆效应

研究了钨尾矿微晶玻璃的形状记忆效应（ＳＭＥ），并用Ｘ射线衍射法（ＸＲＤ）作了相分析。结果表明，钨尾矿微晶玻璃具有明显的ＳＭＥ；恢复应变随回复保温温度升高而增加；该材料随着变形量的减小，形状恢复率随之上升     

EFFECT OF RESIDUAL STRESS ON THE MARTENSITIC TRANSFORMATION OF SPUTTER-DEPOSITED SMA THIN FILMS

TiNi thin films were sputter-deposited on circular single-cry stal silicon substrates un-der various sputtering parameters. The crystal structure and residual stress of the as-deposited films were determined by X-ray diffraction and substrate-curvature method. The phenomenon of stress-suppressed martensitic transformation was observed. R is considered that the residual stresses in SMA thin films based on circular substrates act as balanced biaxial tensile stresses. The status of equilibrant delays the align-ment of self-accommodated variants and the volume shrinkage during the martensitic transformation.     

NiTi形状记忆合金螺钉的研制及医学应用

成功地研制了一种新型NiTi形状记忆合金螺钉并已临床应用了150例,经3年多考核,未发现骨不连及股骨头缺血坏死现象。     

CNG储气瓶的金属磁记忆检测

使用金属磁记忆检测方法和超声方法对在役的七组公交车CNG高压储气瓶组进行了检测,并对比分析了两种方法的检测结果。结果表明,金属磁记忆方法检测到的可疑区域涵盖了超声检测到的缺陷区域,因此用磁记忆方法检测高压储气瓶,有较高的可靠性和高效性。     

Cu-Al-Be形状记忆合金的应力腐蚀性能

用恒载荷法和慢应变速率法及SEM研究了Cu-Al-Be形 状记忆合金在甘油、海水和氨介质中的应力腐蚀性能.结果表明，Cu-Al-Be合金具有良 好的抗海水应力腐蚀性能和较低的氨介质应力腐蚀倾向.单相马氏体有较 好的耐海水腐蚀能力，可减少腐蚀引起的裂纹源；外应力下马氏体的孪晶变形和变体间的界 面迁移，则有利于松弛应力集中，阻碍和延缓腐蚀裂纹源的扩展，从而提高Cu-Al-Be合金的 应力腐蚀能力.     

超高密度磁记录的课题与展望

介绍了超高密度记录的研究开发状况 ,论述了垂直磁记录技术的课题以及采用TMR磁头的、记录密度为Subterabit in2 的记录 读出特性。作为高密度记录所必需的头 盘界面技术 ,提出了接触记录技术的课题 ,还就STM (Scanningtunnelingmicroscopy)存储器论述了未来超高密度技术     

Change of short-term memory effect in acute ischemic ventricular myocardium: A computational study

The ionic mechanism of change in short-term memory (STM) during acute myocardial ischemia has not been well understood. In this paper, an advanced guinea pig ventricular model developed by Luo and Rudy was used to investigate STM property of ischemic ventricular myocardium. STM response was calculated by testing the time to reach steady-state action potential duration (APD) after an abrupt shortening of basic cycling length (BCL) in the pacing protocol. Electrical restitution curves (RCs), which can simultaneously visualize multiple aspects of APD restitution and STM, were obtained from dynamic and local S1S2 restitution portrait (RP), which consist of a longer interval stimulus (S1) and a shorter interval stimulus (S2). The angle between dynamic RC and local S1S2 RC reflects the amount of STM. Our results indicated that compared with control (normal) condition, time constant of STM response in the ischemic condition decreased significantly. Meanwhile the angle which reflects STM amount is less in ischemic model than that in control model. By tracking the effect of ischemia on intracellular ion concentration and membrane currents, we declared that changes in membrane currents caused by ischemia exert subtle influences on STM; it is only the decline of intracellular calcium concentration that give rise to the most decrement of STM.     

Event-driven,pattern-based methodology for cost-effective development of standardized personal health devices

Experiences applying standards in personal health devices (PHDs) show an inherent trade-off between interoperability and costs (in terms of processing load and development time). Therefore, reducing hardware and software costs as well as time-to-market is crucial for standards adoption. The ISO/IEEE11073 PHD family of standards (also referred to as X73PHD) provides interoperable communication between PHDs and aggregators. Nevertheless, the responsibility of achieving inexpensive implementations of X73PHD in limited resource microcontrollers falls directly on the developer. Hence, the authors previously presented a methodology based on patterns to implement X73-compliant PHDs into devices with low-voltage low-power constraints. That version was based on multitasking, which required additional features and resources. This paper therefore presents an event-driven evolution of the patterns-based methodology for cost-effective development of standardized PHDs. The results of comparing between the two versions showed that the mean values of decrease in memory consumption and cycles of latency are 11.59% and 45.95%, respectively. In addition, several enhancements in terms of cost-effectiveness and development time can be derived from the new version of the methodology. Therefore, the new approach could help in producing cost-effective X73-compliant PHDs, which in turn could foster the adoption of standards.