排列互比法用于超精测角的研究

作者分析了我互比法现行的两种数据处理方法的缺点，提出了应用最小二乘法原理推导出合理的数据处理方法。本文还首次从理论上阐明了排列互比法测量结果中出现一次谐波系统误差的原因，提出了减少和消除这一些系统误差的方法，并给实验验证。     

地面立体摄影测量在露天矿山的应用

本文针对露天矿验收测量的特点，论述了露天矿验收地面立体摄影测量方法及其内业处理系统，并将地面立体摄影测量结果与ＥＤＭ解析法测量结果进行了比较。     

人工智能方法用于熔喷过程在线检测的研究

熔喷生产最终产品质量的控制，对于过程优化具有重要的意义。产品质量的在线检测是过程监测与质量控制必不可少的。本文首次在熔喷系统中引入人工智能的研究方法，对熔喷非织造布的厚度与纤维直径进行在线预测。实测数据与人工神经网络的预测结果吻合较好，从而证实了人工神经网络用于模拟熔喷过程的可行性。网络的输入包括：挤出机温度、喷头温度、熔融体挤出速率、空气流率及接收距离。神经元计算的输出是纤维直径与熔喷非织布的厚度。文中进一步提出了将神经网络与专家系统相结合的研究路线，以实现熔喷过程的优化控制。     

Early detection of ageing in solder joints through laser probe thermal analysis of the peltier effect

We have recently developed an optical contactless method for testing the quality of solder joints during accelerated thermal cycling ageing processes.¹ The method was based upon the measurement of the dynamic thermal behaviour of the joint to short bursts of Joule heating. It has proved to be efficient in revealing the formation of cracks at the lead-solder interface. We present a method to evaluate ageing at a much earlier stage in the cycling process. We have observed in earlier work,¹ that before cracks appear, structural changes occur in the solder at the lead-solder interface. The thermal response of the solder joint is recorded over time to a Peltier heat perturbation produced by flowing a current pulse through the interface where structural changes occur. The key point in this method is to discriminate the Peltier effect from the Joule thermal response because both effects generate heat. The variation of the early Peltier response in the thermal cycling ageing tests is seen as a quantitative signature of the structural changes in the lead-solder interface.     

接收机有限带宽对多相码数字脉压的影响

限制接收机带宽是雷达系统中提高信噪比(SNR)的常用方法,相应的也会引起输出波形的失真。本文主要分析了多相码数字脉压雷达系统中,接收机有限带宽对脉压输出结果所造成的影响。运用五点滑动窗平均法在计算机上进行了模拟,并给出了仿真结果。     

Novel miniature integrated optical goniometers

A new principle and arrangement for directly determining the angle of incidence of an optical beam on an object are proposed and demonstrated. The novelty of the approach lies in the realization of a ‘smart object’, which extracts a portion of the incident beam's power into an optical waveguide attached to the object's surface or embedded in its body for converting the angle of incidence into the position of a guided beam with finite lateral extent. This ‘integrated optical light pointer’ beam is accomplished by means of creating additional degrees of freedom on the target in two different ways. While a first type is based on introducing spatial variations of the waveguide thickness, a second type makes use of a chirp of the grating periodicity. The feasibility for practical applications has been experimentally demonstrated by a direct comparison with a commercial high-resolution encoder, resulting in an r.m.s. error of <30′'. Measurements have been performed for chips fabricated based on replicated polycarbonate substrates and with no external optics, showing the great potential of this approach for realizing low-cost yet high-performance miniature goniometers.     

脉冲啁啾对干涉相关测宽的影响及其消除方法

本文深入讨论了脉冲啁啾的非线性起源及其对干涉相关测宽(等值宽度和条纹计数)法的影响。提出根据干涉相关曲线下包络最大值位置适当降低等值宽度位置和用计算机平均处理干涉相关信息的技术以消除啁啾的影响。     

节流式差压流量计的发展和现状

文章介绍节流式差压流量计的特点及标准化进程，煤气流量测量中存在的难点以及正在试图解决的途径。     

自控温电伴热材料在仪表测量管线上的应用

文章就化工自动化仪表测量管线的伴热问题,介绍了自控温电伴热材料的特点、伴热设计、施工方案以及运行中的注意事项。     

Ultrasonic measurement of the inter-electrode gap in electrochemical machining

During the process of electrochemical machining the dependency of the inter-electrode gap with time and process parameters can be used to determine process characteristics and to define the shape of the workpiece surface relative to the tool surface. Defining process variables to map out the required gap-time function requires the use of time-consuming iterative trials. In-line monitoring of the gap would enable process control and tool to workpiece transfer characteristics to be achieved (for ideal conditions) without the requirement to generate such parameter maps. This work explores the use of ultrasound applied as a passive, non-intrusive, in-line gap measurement system for ECM. The accuracy of this technique was confirmed through correspondence between the generated gap-time and current time data and theoretical models applicable to ideal conditions. Gap measurements are also used to demonstrate and quantify the degree of departure from ideal behaviour for an In718/chloride system as the electrolyte flow rate is reduced from 16 to 4 l min⁻¹. The monitoring of the gap size has also been shown to be effective when determining shape convergence under ideal conditions, for the example case of a 2D sinusoidal profile.